• 제목/요약/키워드: Organic Amine

검색결과 135건 처리시간 0.026초

3급 아민염 및 4급 암모늄염의 Tetrathiocyanatocobaltate[II]에 의한 분석화학적 연구 (Studies on the Chemical Analysis of the Tertiary Amine Salt and Quaternary Ammonium Salt by Tetrathiocyanatocobaltate[II])

  • 엄동옥;이윤중
    • 약학회지
    • /
    • 제24권3_4호
    • /
    • pp.159-165
    • /
    • 1980
  • Tetrathiocyanatocobaltate[II] forms complexes with tertiary amine salts or quarternary ammonium salts which were extractable from aqueous solution by organic solvent. In order to study composition of the complex, the colored crystalline complexes produced were evaluated with elemental analysis, infrared and mass spectra. And also a novel spectrophotometric method for the determination of tertiary amine salt or quarternary ammonium salt with tetrathiocyanatocobaltate[II] was established by organic solvent extraction within coefficient of variation of 1.06-1.35%.

  • PDF

pH에 따른 부식유기산의 메틸수은 결합 리간드 변화: X-선 흡수분석 (pH Dependence of CH3Hg+-binding Sites in Humic Acid: An X-ray Absorption Study)

  • 윤소정
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제16권6호
    • /
    • pp.122-132
    • /
    • 2011
  • Mercury accumulates in biota mainly as methylmercury. In nature, methylmercury shows high affinity to organic matter and $CH_3Hg^+$-organic matter complexation affects the mobility and bioavailabiity of methylmercury. In this study, we examined the methylmercury binding sites in an aquatic humic acid as affected by the pH condition using Hg $L_{III}$-edge extended X-ray absorption fine structure (EXAFS). We evaluated methylmercury binding humic ligands using methylmercury-thiol, methylmerury-carboxyl, and methylmercury-amine complexation models. When $CH_3Hg^+$-to-humic reduced sulfur ratio is 0.3, we found that most of $CH_3Hg^+$ binds to thiol ligands at pH 5 and 7. At pH 7, however, some carboxyl or amine ligand contribution is observed, unlike at pH 5 where $CH_3Hg^+$ almost exclusively binds to thiol ligands. The carboxyl or amine ligand contribution may indicate that some types of thiol ligands in the natural organic matter have relatively low complexation constants or acid dissociation constants compared to those of some carboxyl or amine ligands. Analysis results indicate that ~0.2 fraction of methylmercury binds to amine or carboxyl ligands and ~0.8 to thiol ligands at pH 7.

Studies on the Distribution Coefficient of the Primary, Secondary, Tertiary Amine and Quaternary Ammonium-methylorange Salts

  • Kim, Bak-Kwang
    • 약학회지
    • /
    • 제18권3호
    • /
    • pp.183-189
    • /
    • 1974
  • Distribution coefficients between nitrobanzene solution and deionized water, show a straight line when the number of alkyl radicals against the logarithm of distribution coefficient of the salts was plotted. After extracting salts of the indicator and the cationic surfactants with organic solvents, and employing the colorimetric method was used. A calculation method of distribution coefficients of the salts in the organic solvent has been suggested and it could be used for the extraction equilibrium of the primary amine, $CH_{3}(CH_2)_{n}NH_3^+$ secondary amine, $CH_{3}(CH_2)_{n}NH_{2}(CH_3)^+$, tertiary amine $CH_{3}(CH_2)_{n}NH(CH_3)_2^+$ and quaternary ammonium, $CH_{3}(CH_2)_{n}N(CH_3)_3^+$MO$^-$salts, (n=3,5,7,11).

  • PDF

텅스텐의 아민용매 추출과정에서의 알코올의 작용 (Alcohol-Amine Synergism in the Organic Solvent Extraction of Tungsten)

  • 이후성;어용선;손연수
    • 대한화학회지
    • /
    • 제16권6호
    • /
    • pp.361-368
    • /
    • 1972
  • 5%트리옥틸아민과 5%옥틸알콜이 든 헥산유기용매 1l는 62g의 $WO_3$를 추출할 수 있었는데 반하여 아민만을 사용했을 경우는 37g의 $WO_3$밖에 추출할 수 없었다. 유기용매 추출과정에서 이러한 알콜의 아민-텅스텐 화합물의 용해도의 상승작용 및 아민과 텅스텐산간의 상호작용을 핵자기 공명분광학을 이용하여 연구하였다. 텅스텐은 고분자형의 텅스텐산 이온상태로 유기층으로 추출되어 다중텅스텐산 트리옥틸 암모니움염을 형성함을 알 수 있었으며 이 염은 텅스텐산이온과 알콜간에 수소결합을 형성함으로써 탄화수소 용매에서 더욱 안정화됨을 알 수 있었다.

  • PDF

작용기를 치환한 Metal-Organic Frameworks 에 대한 DFT 연구 (A Density Functional Theory Study on a Series of Functionalized Metal-Organic Frameworks)

  • 김대진;이태범;최승훈;이은성;오유진;윤지혜;김자헌
    • 한국전기화학회:학술대회논문집
    • /
    • 한국전기화학회 2005년도 수소연료전지공동심포지움 2005논문집
    • /
    • pp.329-334
    • /
    • 2005
  • In order to find out rational design and synthetic strategies toward efficient hydrogen storage materials, we performed quantum mechanical calculations on a series of the Metal-Organic Frameworks (MOFs) containing functionalized organic linkers. Based on the shape of frontier orbitals and the electrostatic potential map of various MOFs from density functional theory calculations, it was found that the delocalization of electron and asymmetric polarization of the organic linker play an important role in the hydrogen storage capacity of Metal-Organic Frameworks. The prediction of the modeling study could be supported by the hydrogen adsorption experiments using MOF-5 and amine substituted MOF-5, which showed more enhanced hydrogen storage capacity of amine substituted MOF-5 compared with that of MOF-5.

  • PDF

아민기를 가진 유기물을 사용한 금속의 부식억제효과 (A Study on the Inhibition Effect of Metal Corrosion Using Organic Compound Containing an Amine Group)

  • 박근호
    • 한국응용과학기술학회지
    • /
    • 제27권3호
    • /
    • pp.361-369
    • /
    • 2010
  • A study on the corrosion inhibition of metals is important in many industrial applications (carbon steel, copper, aluminum, SUS 304, nickel). In this study, we investigated the C-V diagrams related to the surface corrosion of metals. It was observed through the SEM that the surface corrosion state of the various metals had the corrosion potential by the scan rate and the organic inhibitor containing an amine group. We determined to measure cyclic voltammetry using the three-electrode system. The measurement of oxidation and reduction ranged from -1350mV to 1650mV. The scan rate was 50, 100, 150, and 200mV/s. It turned out that the C-V characterization of SUS 304 was irreversible process caused by the oxidation current from the cyclic voltammogram. After adding organic inhibitors, the adsorption film was constituted, and the passive phenomena happened. As a result, it was revealed that the inhibition effect of metal corrosion depends on the molecular interaction, and the interaction has influence on the adsorption complex.

유기용매 사용 감소를 위한 건식 기계 장치를 이용한 NH2-HNT 제조의 조건 변화와 스케일업 (Production of NH2-HNT Using Organic Solvent Reducing Dry Mechanical Device with Different Conditions and with Scale Up Settings)

  • 김문일
    • 한국산업융합학회 논문집
    • /
    • 제27권2_2호
    • /
    • pp.357-361
    • /
    • 2024
  • Halloysite nanotube (HNT) has a nanotube structure with the chemical formula of Al2Si2O5(OH)4·nH2O and is a natural sediment of aluminosilicate. HNT has been used as additive to improve the mechanical properties of epoxy composites with exchange of amine group as a terminal functional group using huge amount of organic solvents. In order to save time and simplify complicated procedures, a dry coating machine was designed and used for amine group exchange in previous research. For better applications, it was conducted with different parameters and with scale up settings. Best condition was found to reduce usage of solvent, time and man power.

The Epoxy-metal Interphase and Its Incidence on Practical Adhesion

  • Roche, Alain Andre;Aufray, Maelenn
    • 접착 및 계면
    • /
    • 제4권2호
    • /
    • pp.1-9
    • /
    • 2003
  • Epoxy-amine liquid prepolymers are extensively applied onto metallic substrates and cured to obtain painted materials or bonded joint structures. Overall performances of such systems depend on the created interphase between the organic layer and the substrate. When epoxy-amine liquid mixtures are applied onto more or less hydrated metallic oxide layer, concomitant amine chemical sorption and hydroxide dissolution appear lending to the chelate formation. As soon as the chelate concentration is higher than the solubility product, these species crystallize as sharp needles. Moreover, intrinsic and thermal residual stresses are developed within painted or bonded systems. When residual stresses are higher than the organic layer/substrate adhesion, buckling, blistering, debonding may occur leading to a catastrophic drop of system performances. Practical adhesion can be evaluated with either ultimate parameters (Fmax or Dmax) or the critical strain energy release rate, using the three point flexure test (ISO 14679-1997). We observe that, for the same system, the ultimate load decreases while residual stresses increase when the liquid/solid time increases. Ultimate loads and residual stresses depend on the metallic surface treatment. For these systems, the critical strain energy release rate which takes into account the residual stress profile and the Young's modulus gradient remains quite constant whatever the metallic surface treatment was. These variations will be discussed and correlate to the formation mechanisms of the interphase.

  • PDF

有機 Halides 와 Amines 間의 光反應에 關한 硏究 (A Study on the Photoreaction between Organic Halides and Amines)

  • 김유선;박용자
    • 대한화학회지
    • /
    • 제6권2호
    • /
    • pp.148-154
    • /
    • 1962
  • The reactions between organic halides$(CCl_4,\;C_6H_5Br,\;C_6H_5Cl,\;C_6H_5I)$ and amines $(C_6H_5NH_2,\;R_2NH,\;R_3N,\;(CH_2)_5NH,\;pyridine)$ were studied under mixed u.v. irradiation. The modes of reactions were examined by means of gas chromatography and product-reactant ratio determination. The reaction of $CCl_4$ with amines give chloroform and hexachloroethanes, and the reaction of aromatic halides with amines gave biphenyl and benzene. In each series of reaction there obtained mainly corresponding amine hydrohalides, but no amination products. The reactivity was in the order of the basicity of amines and of the reactivity of organic hahides, except in the case of cyclic tertiary amine. The result was interpreted as a non-chain photodecomposition process. A competitive proton abstraction reaction path via the formation of a change transfer complex was proposed as the reaction mechanism.

  • PDF