• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.353-360
• /
• 2009

The use of colorants as additives for foods and drinks is a significant factor to food consumers in determining the acceptability of processed foods. In recent years, the number of previously used artificial colorants/dyes suitable for food use has been drastically reduced as a result of toxicological studies. Therefore, the use of natural pigments such as anthocyanins and betacyanins that were known to have anticancer and antioxidant activities is increasingly required. In this study, the water-soluble plant pigments, anthocyanins and betacyanins, were easily extracted with a very simple method using a few organic solvents such as ethyl acetate, ethyl ether, and chloroform. After the extraction of them, these two major plant pigments could be also simply and rapidly separated and discriminated by a solely one-stepped agarose gel electrophoresis in a citrate buffer (pH 3.0).

• Journal of Microbiology and Biotechnology
• /
• v.22 no.1
• /
• pp.58-68
• /
• 2012

An investigation was conducted on the enhancement of production and purification of an oxidant and SDS-stable alkaline protease (BHAP) secreted by an alkalophilic Bacillus horikoshii, which was screened from the body fluid of a unique Korean polychaeta (Periserrula leucophryna) living in the tidal mud flats of Kwangwha Island in the Korean West Sea. A prominent effect on BHAP production was obtained by adding 2% maltose, 1% sodium citrate, 0.8% NaCl, and 0.6% sodium carbonate to the culturing medium. The optimal medium for BHAP production contained (g/l) SBM, 15; casein, 10; $K_2HPO_4$, 2; $KH_2PO_4$, 2; maltose, 20; sodium citrate, 10; $MgSO_4$, 0.06; NaCl, 8; and $Na_2CO_3$, 6. A protease yield of approximately 56,000 U/ml was achieved using the optimized medium, which is an increase of approximately 5.5-fold compared with the previous optimization (10,050 U/ml). The BHAP was homogenously purified 34-fold with an overall recovery of 34% and a specific activity of 223,090 U/mg protein using adsorption with Diaion HPA75, hydrophobic interaction chromatography (HIC) on Phenyl-Sepharose, and ion-exchange chromatography on a DEAE- and CM-Sepharose column. The purified BHAP was determined a homogeneous by SDS-PAGE, with an apparent molecular mass of 28 kDa, and it showed extreme stability towards organic solvents, SDS, and oxidizing agents. The $K_m$ and $k_{cat}$ values were 78.7 ${\mu}M$ and $217.4s^{-1}$ for N-succinyl-Ala-Ala-Pro-Phe-pNA at $37^{\circ}C$ and pH 9, respectively. The inhibition profile exhibited by PMSF suggested that the protease from B. horikoshii belongs to the family of serine proteases. The BHAP, which showed high stability against SDS and $H_2O_2$, has significance for industrial application, such as additives in detergent and feed industries.

• Journal of Animal Science and Technology
• /
• v.53 no.6
• /
• pp.517-523
• /
• 2011

The experiment was conducted with 144 broiler chicks from day-old to 5 weeks of age to investigate the efficacy of a water additive in broiler production. The chicks were randomly distributed into four different treatments namely T1 (control), T2 (water additive as per recommendation level), T3 (25% less than recommendation) and T4 (25% more than recommendation). Body weight of control group was higher in 2nd week of age, but at the end of the experiment additive groups showed higher values compare to control (p<0.05). Body weight gain was increased and feed conversion ratio was improved in the additives groups during the finishing and total period, although feed intake was different among the additive groups (p<0.05). When the hematological parameters were evaluated, packed cell volume and total erythrocytes counts were increased in the additive group that received 25% more than recommendation, and hemoglobin in 25% less than recommendation group. Mean cell volume and mean cell hemoglobin of the additive groups showed lower (p<0.05) values compare to the control, but other parameters were not affected. Sales price and profit were significantly higher in the additive groups compare to the control, although total production cost was increased in the additive groups (p<0.05). All levels of water additive increased profit in comparison with the control but 25% less than recommendation level appeared to be most profitable and cost effective. It also suggests that any additive considered for poultry, must undergo trial for determining efficacy as well as its cost effectiveness for application.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.2
• /
• pp.33-40
• /
• 2013

Powdered additive or organic filler is used to improve paperboard thickness and to reduce drying energy consumption in the Korean paperboard industry. In a previous study, we identified alternative non-lignocellulosic resources to wood powder, specifically brewers grain and oil palm frond powders, and verified that these materials had the same functionality as wood powder. The main drawback of the use of such additives, including both lignocellulosic and non-lignocellulosic resources, is the deterioration in paperboard strengths. Therefore, we carried out a basic study on the surface modification of brewers grain and oil palm frond powders to improve the strengths of paperboard. Surface modification was performed using various types of cationic and oxidized starches. The streaming current and zeta-potential of the two non-lignocellulosic powders were measured and CLSM images were taken to assess the surface modification.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.8 no.3
• /
• pp.169-174
• /
• 1988

An experiment was conducted to determine the feeding value of Arundinella hirat silage making by different methods ie., added starch 3%, formic acid 1% (FA), anhydrous ammonia ($NH_3$) 3%, and dried poultry waste (DPW) 3%. The samples were analyzed organic acid, cell wall constituent (NDF), cell contents (NDS), lignincutin-silica (ADL), hemicellulose (H: CHO) and in vitro dry matter digestibility (DMD) by pepsin-cellulase technique. The feeding value of silages were compared with corn siiage. The results are summarized as follows; 1.Formic acid treated to silage was lower pH(4.0), but anhydrous ammonia (8.37) and DPW added silage (8.72) were higher than that of the other treatment silages. 2.Fermentative quality of corn silage, starch, DPW, $NH_3$, control and FA treated silage were marked 100,81, 77,63,62 and 58, respectively. 3.Silage with $NH_3$, (23.57%) and DPW (10.42%) of content of protein were higher than that of other treated silages. 4.Silage with $NH_3$, was significantly lower contents of NDF, but did not ADF of among the treated silages. 5.In the contents of ADL, starch added silage was significantly decreased (p < 0.05), but did not the other treatment. 6.DMD of in vitro by pepsin-cellulase of silage with starch was increased three folds as equal to corn silage but did not increased the other treated silages. 7.Correlationship of latic acid an total acid, and NDS were a positive but lactic acid and NDF was a negative correlation.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.156-163
• /
• 2014

In this study, we tried to improve the cycling performance of lithium-ion batteries by suppressing decomposition of the electrolyte solution containing fluorsilane-based additive. Trifluoropropyltrimethoxysilane was electrochemically oxidized and reduced prior to the decomposition of the liquid electrolyte composed of lithium salt and carbonate-based organic solvent. Thus, the stable solid electrolyte interphase (SEI) layer on both negative electrode and positive electrode was formed, and it was confirmed that the cycling performance of lithium-ion batteries assembled with electrolyte solution containing 5 wt.% trifluoropropyltrimethoxysilane was the mostly enhanced. The products formed on electrodes were analyzed by the SEM and XPS analysis, and it was demonstrated that trifluoropropyltrimethoxysilane can be one of the promising SEI-forming additives.

• Journal of Powder Materials
• /
• v.27 no.3
• /
• pp.233-240
• /
• 2020

Nano-sized ZnSe particles are successfully synthesized in an aqueous solution at room temperature using sodium borohydride (NaBH₄) and thioglycolic acid (TGA) as the reducing agent and stabilizer, respectively. The effects of the mass ratio of the reducing agent to Se, stabilizer concentration, and stirring time on the synthesis of the ZnSe nanoparticles are evaluated. The light absorption/emission properties of the synthesized nanoparticles are characterized using ultraviolet-visible (UV-vis) spectroscopy, photoluminescence (PL) spectroscopy, and particle size analyzer (PSA) techniques. At least one mass ratio (NaBH4/Se) of the reducing agent should be added to produce ZnSe nanoparticles finer than 10 nm and to absorb UV-vis light shorter than the ZnSe bulk absorption wavelength of 460 nm. As the ratio of the reducing agent increases, the absorption wavelengths in the UV-vis curves are blue-shifted. Stirring in the atmosphere acts as a deterrent to the reduction reaction and formation of nanoparticles, but if not stirred in the atmosphere, the result is on par with synthesis in a nitrogen atmosphere. The stabilizer, TGA, has an impact on the Zn precursor synthesis. The fabricated nanoparticles exhibit excellent photo-absorption/discharge characteristics, suggesting that ZnSe nanoparticles can be alloyed without the need for organic solutions or high-temperature environments.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.3
• /
• pp.331-338
• /
• 2012

A novel gene coding for an endo-${\beta}$-1,4-mannanase (manA) from Bacillus subtilis strain G1 was cloned and overexpressed in P. pastoris GS115, and the enzyme was purified and characterized. The manA gene consisted of an open reading frame of 1,092 nucleotides, encoding a 364-aa protein, with a predicted molecular mass of 41 kDa. The ${\beta}$-mannanase showed an identity of 90.2-92.9% ${\leq}95%$) with the corresponding amino acid sequences from B. subtilis strains deposited in GenBank. The purified ${\beta}$-mannanase was a monomeric protein on SDS-PAGE with a specific activity of 2,718 U/mg and identified by MALDI-TOF mass spectrometry. The recombinant ${\beta}$-mannanase had an optimum temperature of $45^{\circ}C$ and optimum pH of 6.5. The enzyme was stable at temperatures up to $50^{\circ}C$ (for 8 h) and in the pH range of 5-9. EDTA and most tested metal ions showed a slightly to an obviously inhibitory effect on enzyme activity, whereas metal ions ($Hg^{2+}$, $Pb^{2+}$, and $Co^{2+}$) substantially inhibited the recombinant ${\beta}$-mannanase. The chemical additives including detergents (Triton X-100, Tween 20, and SDS) and organic solvents (methanol, ethanol, n-butanol, and acetone) decreased the enzyme activity, and especially no enzyme activity was observed by addition of SDS at the concentrations of 0.25-1.0% (w/v) or n-butanol at the concentrations of 20-30% (v/v). These results suggested that the ${\beta}$-mannanase expressed in P. pastoris could potentially be used as an additive in the feed for monogastric animals.

• Microbiology and Biotechnology Letters
• /
• v.42 no.4
• /
• pp.417-421
• /
• 2014

Sphagnum palustre (SP), a species of moss belong to the Sphagnaceae family, is used as a dwarfed potted plant, in diapers, bandages, and soil additives. Although, SP can be found all over the world and is very cheap, the study of SP components and bioactivities are still at a rudimentary stage. In this study, the hot-water extract of SP (HWSP) and its subsequent organic solvent fractions were prepared, and their in-vitro anti-thrombosis activities were evaluated. The results showed that the water residue of HWSP has a strong anti-coagulation activity with significant extensions of thrombin time, and platelet aggregation activity. Our results suggest that the SP has the potential to be a novel resource for anti-thrombosis agents. This report provides the first evidence of the anti-thrombosis activity of SP.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.117-123
• /
• 2016

Glass wool is a material that has been used as a heat insulator in various fields including construction industry. Since it is a nonflammable material, it does not generate toxic gases on fire, and thus public agencies recommend using glass wool as a heat insulator instead of other organic materials. However, repeated drying and wetting cycles can deteriorate thermal property of glass wool due to the shrinkage and reduction in pore size. For this reason, it needs to be replaced periodically, and waste materials are generated. This research aims to utilize waste glass wool as additives for increasing mechanical properties of concrete. According to the experimental results, it was found that glass wool has weak pozzolanic activity, and beneficial effect on both compressive and flexural strength. The optimum amount found in this experimental work was 0.5% volumetric addition to the concrete.