• 세라미스트
• /
• 제23권2호
• /
• pp.145-165
• /
• 2020

Halide perovskites are promising photovoltaic materials due to their excellent optoelectronic properties like high absorption coefficient, low exciton binding energy and long diffusion length, and single-junction solar cells consisting of them have shown a high certified efficiency of 25.2%. Despite of high efficiency, perovskite photovoltaics show poor stability under actual operational condition, which is the mostly critical obstacle for commercialization. Given that the stability of the perovskite devices is significantly affected by charge-transporting layers, the use of inorganic charge-transporting layers with better intrinsic stability than the organic counterparts must be beneficial to the enhanced device reliability. In this review article, we summarized a number of studies on the inorganic charge-transporting layers of the perovskite solar cells, especially focusing on their effects on the enhanced device reliability.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.118-122
• /
• 2020

Inorganic-organic hybrid perovskite solar cells have demonstrated a significant achievement by reaching a certified power conversion efficiency of 25.2% in 2019 as compared to that of 3.8% in 2009. However, organic hole conductors such as PTAA and spiro-OMeTAD are known to be expensive and unstable when they are exposed to operational conditions. In this study, the inorganic hole conductor CuSCN was used to overcome such concerns. The influence of dipropyl sulfide (DPS) and diethyl sulfide (DES) as CuSCN deposition solvents on the underlying perovskite active layer was investigated. DES solvent was observed to be advantageous in terms of CuSCN solubility and mild for the perovskite layer, thereby resulting in a power conversion efficiency of 16.9%.

• 세라미스트
• /
• 제22권2호
• /
• pp.146-169
• /
• 2019

To overcome the theoretical efficiency of single-junction solar cells (> 30 %), tandem solar cells (or multi-junction solar cells) is considered as a strong nominee because of their excellent light utilization. Organic-inorganic halide perovskite has been regarded as a promising candidate material for next-generation tandem solar cell due to not only their excellent optoelectronic properties but also their bandgap-tune-ability and low-temperature process-possibility. As a result, they have been adopted either as a wide-bandgap top cell combined with narrow-bandgap silicon or CuIn_xGa_(1-x)Se₂ bottom cells or for all-perovskite tandem solar cells using narrow- and wide-bandgap perovskites. To successfully transition perovskite materials from for single junction to tandem, substantial efforts need to focus on fabricating the high quality wide- and narrow-bandgap perovskite materials and semi-transparent electrode/recombination layer. In this paper, we present an overview of the current research and our outlook regarding perovskite-based tandem solar technology. Several key challenges discussed are: 1) a wide-bandgap perovskite for top-cell in multi-junction tandem solar cells; 2) a narrow-bandgap perovskite for bottom-cell in all-perovskite tandem solar cells, and 3) suitable semi-transparent conducting layer for efficient electrode or recombination layer in tandem solar cells.

• 한국재료학회지
• /
• 제30권10호
• /
• pp.515-521
• /
• 2020

Organic-inorganic hybrid perovskite nanocrystals have attracted a lot of attention owing to their excellent optical properties such as high absorption coefficient, high diffusion length, and photoluminescence quantum yield in optoelectronic applications. Despite the many advantages of optoelectronic materials, understanding on how these materials interact with their environments is still lacking. In this study, the fluorescence properties of methylammonium lead bromide (CH₃NH₃PbBr₃, MAPbBr₃) nanoparticles are investigated for the detection of volatile organic compounds (VOCs) and aliphatic amines (monoethylamine, diethylamine, and trimethylamine). In particular, colloidal MAPbBr₃ nanoparticles demonstrate a high selectivity in response to diethylamine, in which a significant photoluminescence (PL) quenching (~ 100 %) is observed at a concentration of 100 ppm. This selectivity to the aliphatic amines may originate from the relative size of the amine molecules that must be accommodated in the perovskite crystals structure with a narrow range of tolerance factor. Sensitive PL response of MAPbBr₃ nanocrystals suggests a simple and effective strategy for colorimetric and fluorescence sensing of aliphatic amines in organic solution phase.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1729-1734
• /
• 2018

Organic-inorganic halide perovskite single crystals undergo phase transition of being cubic, tetragonal, or orthorhombic depending on the temperature. We investigated the $CH_3NH_3PbBr_{3-x}I_x$ single crystals grown by the inverse temperature crystallization method with temperature-dependent UV-Vis absorption and photoluminescence. From the temperature-dependent absorption measurement, the optical band gap is extracted by derivation of absorption spectrum fitting and Tauc plot. In our results, $CH_3NH_3PbBr_{3-x}I_x$ single crystals show that an abrupt change in optical band gap, PL peak position and intensity appears around 120 K - 170 K regions, indicating the phase transition temperature.

• 한국결정성장학회지
• /
• 제15권2호
• /
• pp.86-91
• /
• 2005

층상 구조의 유기-무기 페로브스카이트 복합 소재 $(C_nH_{2n+1}NH_3)_2CuC1_4$ (n=6, 8, 10, 12)을 합성하였다. $(C_nH_{2n+1}NH_3)_2CuC1_4$ 화합물에서 긴 사슬의 양성자화된 알킬 암모늄 이온은 기울어진 이중층의 구조로 $CuCl_6$ 팔면체의 구석을 공유하고 있는 페로브스카이트형의 층들 사이에의 삽입되었다. 페로브스카이트 층상 화합물에서의 3개의 고체상을 HT-XRD와 DSC를 사용하여 조사하였다. $(C_nH_{2n+1}NH_3)_2CuC1_4$ 화합물은 단계적인 층간거리의 증가와 함께 고체-고체 상전이 현상을 보여준다 3개의 다른 구조는 긴 사슬의 양성자화된 알킬 암모늄 이온의 형태 변화로 설명하였다.

• Journal of the Korean Physical Society
• /
• 제73권11호
• /
• pp.1787-1793
• /
• 2018

The power conversion efficiency of perovskite solar cells has reached 23.3%. Although significant developments have been made through intensive studies, the stability issue is still challenging. Passivation of perovskite solar cells with a transparent polymer provides better stability; however, there are a few disadvantages of organic polymer such as low thermal stability, weak adhesion and the lack of water retention ability. In this work, we prepared a dual Parylene-F/C layer with 3-methacryloxypropyltrimethoxysilane, A-174, to combine the advantages of organic and inorganic materials. As a result, A-174 treated dual Parylene-F/C layer demonstrated improved passivation effects compared to a single Parylene layer due to the strong binding of Parylene and the water retention ability by $SiO_2$ formed from A-174. This synergetic effects can be expanded to the combination of other organic materials and organosilane compounds.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.98-107
• /
• 2016

Third-generation photovoltaics are of low cost based on solution processes and are targeting a high efficiency. To meet the commercial demand, however, significant improvements of both efficiency and stability are required. In this sense, interfacial engineering can be useful key to solve these issues because trap sites and interfacial energy barrier and/or chemical instability at organic/organic and organic/inorganic interfaces are critical factors of efficiency and stability degradation. Here, we thoroughly review the interfacial engineering strategies applicable to three representative third-generation photovoltaics - organic, perovskite, colloidal quantum dot solar cell devices.

• 세라미스트
• /
• 제21권1호
• /
• pp.24-43
• /
• 2018

Organic-inorganic halide perovskite materials have attracted significant attention during the last few years because of their superior properties for electronic and optoelectronic devices, such as their long charge carrier diffusion lengths and high photoluminescence quantum yields of up to 100% with tunable bandgaps over the entire visible spectral range. In addition to solar cells, light emitting diodes (LEDs) represent a fascinating application for halide perovskite materials. In this study, we review the recent progress in halide perovskite LEDs. The current strategies for improving the performance of halide LEDs, focusing on morphological engineering, dimensional engineering, compositional engineering, surface passivation, interfacial engineering, and the plasmonic effect are discussed. The challenges and perspectives for the future development of halide perovskite LEDs are also considered.

• Electronic Materials Letters
• /
• 제14권6호
• /
• pp.657-668
• /
• 2018

Organic-inorganic hybrid lead halide perovskites have been extensively investigated for various optoelectronic applications. Particularly, owing to their ability to form highly crystalline and homogeneous films utilizing low-temperature solution processes (< $150^{\circ}C$), perovskites have become promising photoactive materials for realizing high-performance flexible solar cells. However, the current use of mesoporous $TiO_2$ scaff olds, which require high-temperature sintering processes (> $400^{\circ}C$), has limited the fabrication of perovskite solar cells on flexible substrates. Therefore, the development of a low-temperature processable charge-transporting layer has emerged as an urgent task for achieving flexible perovskite solar cells. This review summarizes the recent progress in low-temperature processable electron- and hole-transporting layer materials, which contribute to improved device performance in flexible perovskite solar cells.