• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.129-141
• /
• 2010

In this paper, we present a wearable intelligent device based on multi-sensor for monitoring human activity. In order to recognize multiple activities, we developed activity recognition algorithms utilizing an image sensor and a 3-axis accelerometer sensor. We proposed a grid?based optical flow method and used a SVM classifier to analyze data acquired from multi-sensor. We used the direction and the magnitude of motion vectors extracted from the image sensor. We computed the correlation between axes and the magnitude of the FFT with data extracted from the 3-axis accelerometer sensor. In the experimental results, we showed that the accuracy of activity recognition based on the only image sensor, the only 3-axis accelerometer sensor, and the proposed multi-sensor method was 55.57%, 89.97%, and 89.97% respectively.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.81-84
• /
• 2007

This paper describes general procedure and results of the GPS 3rd odor network adjustment which has been carried out for determining coordinates sets with respect to new Korean Geodetic Datum, so-call Korean Geodetic Datum 2002 (KGD 2002). The adjustment begins with minimally constrained adjustments with respect to each of the 69 campaign networks. This was followed by constructing and adjusting sixteen block network. After detecting and removing outliers in the observation file, an attempt was made by applying the empirical stochastic modeling techniques used in the 2nd order network adjustment, so as to determine the magnitude of absolute and relative error for the estimated baseline vector from the GPS data processing. The over constrained adjustment were, in sequence, performed against each of the block network. In this adjustment, both of the 2nd order control points in the block network and the 3rd order control points overlapped with adjacent network whose coordinates were already determined from a preceding adjustment. The final adjustment results have shown that the accuracy of the 3rd order network adjustment was better than 1cm and 2cm in horizontal and vertical component, respectively.

• Korean Journal of Materials Research
• /
• v.22 no.12
• /
• pp.658-663
• /
• 2012

The electrical properties of a laminated SMD type PTC thermistor for microcircuit protection were investigated as a function of polymer blowing agent addition. Green ceramics for multilayered $BaTiO_3$-based PTCRs were formed by doctor blade method of barium titanate powders; we successfully laminated the sintered ceramic chips to obtain 10 layer chip PTCRs with PTC effect. The sintered density increases with increasing sintering temperature. The electrical properties of the sintered samples were strongly dependent on the calcination and addition of a polymer blowing agent. When $BaTiO_3$ powders containing 0.2 mol% of $Y_2O_3$ were calcined at $1000^{\circ}C$ for 2 hrs, the resistivity jump was of 1-2 orders of magnitude. The resistivity at room temperature increases according to the polymer blowing agent addition. Also, the sample using the calcined powder showed a lower resistivity than that of the sample prepared using powders without calcinations. With an increase in the OBSH, the magnitude of the resistivity jumped as a function of the temperature increase. The resistivity of the sintered bodies after the addition of 0.5 wt% polymer blowing agent at $1290^{\circ}C$ for 2 h was shown to be about $8.5{\Omega}{\cdot}cm$; the jump order of the sintered bodies was shown to be on the order of $10^2$.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.866-876
• /
• 2003

Experiments were performed for the real sized 12 reinforced concrete columns of 350${\times}$350${\times}$3350 mm with normal concrete in order to observe the fire-damaged behavior of these columns. Columns were heated according to the ISO heating curve. Main experimental parameters were: magnitude of axial load, heating time, cover thickness, and eccentricity. Effects of these parameters on the axial expansion and contraction, rotation, buckling, ISO fire resistance, and structural stability were experimentally quantified. It has been observed that the contraction rate of axial deformation was affected mostly by the duration of heating time and buckling of reinforcement or member by the magnitude of axial load, duration of heating time, cover thickness and eccentricity in order. Based on the experimental observations, ISO fire resistance criteria were qualiatively criticized.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.21 no.4
• /
• pp.107-122
• /
• 2010

A national library bears responsibility to collect, develop, manage and preserve the national knowledge resources and heritages. The institution, in order to accomplish this duty, should center on systematically developed collection development policy. This paper, in this regard, strives to propose a model to comprise of basic principles of collection development of a national library in order for the effective management of resources by the types and subjects. Major emphasis was put on the nature of a national library as a legal deposit library, an information gateway, and a repository for national information resources. As a result, a model collection development policy appropriate for a national library has been proposed by analyzing cases in other countries to guide establishing principles for determining and analyzing the types and magnitude of the collection acquisition; by applying the Five-level conspectus to be optimal to collection magnitude; and, by identifying the essential elements in systematic development of national knowledge/information resources.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.930-935
• /
• 2009

This paper describes a miniaturezed metamaterial BT chip antenna for mobile devices. The size of the proposed antenna is $3.0\;mm(W){\times}2.0\;mm(L){\times}1.2\;mm(H)$. And it is fabricated by chip type. The zeroth-order resonant properties are analyzed by magnitude and phase distributions of the surface current using surface current scanning system. The antenna offers omni-directional radiation patterns and measured 3D average gain is over - 1.7 dBi.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.6
• /
• pp.625-628
• /
• 1991

Using uniform flat plate-like samples of ZSM-5 zeolites, diffusion coefficients were measured volumetrically for the diffusion of xylene, ethyltoluene and diethylbenzene by direct measurement of sorption rate. Toluene disproportionation over H(100)-, K(72)-and Cs(82)-ZSM-5 at 773 K and toluene methylation, toluene ethylation and ethylbenzene ethylation over Cs(75)-ZSM-5 at 623 K were carried out. The selective formation of para xylene during the toluene disproportionation, presumably due to the increased tortuosity over Cs-ZSM-5, could be explained by smaller diffusion coefficient in Cs-ZSM-5 than in K-and H-ZSM-5. The para selectivity increased in the order; toluene methylation < toluene ethylation < ethylbenzene ethylation. As the chain length of the alkyl substituent in dialkylbenzenes is increased, the para selectivity of the products was improved. It may be attributed to the differences in the ratios of diffusion coefficient of para products to that of ortho ones. Diffusion coefficient of m-xylene was about 1 order of magnitude smaller than that of o-xylene.

• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.163-174
• /
• 2001

A dynamic reliability model for analyzing the stability of armor units on rubble-mound breakwater is mathematically developed by using Hudson's formula and definition of single-failure mode. The probability density functions of resistance and loading functions are defined properly, the related parameters to those probability density functions are also estimated straightforwardly by the first-order analysis. It is found that probabilities of failure for the stability of armor units on rubble-mound breakwater are continuously increased as the service periods are elapsed, because of the occurrence of repeated loading of random magnitude by which the resistance may be deteriorated. In particular, the factor of safety is incorporated into the dynamic reliability model in order to evaluate the probability of failure as a function of factor of safety. It may thus be possible to take some informations for optimal design as well as managements and repairs of armor units on rubble-mound breakwater from the dynamic reliability analyses.

• Structural Engineering and Mechanics
• /
• v.8 no.5
• /
• pp.453-464
• /
• 1999

Safety monitoring systems of structures generally resort to detecting possible changes of dynamic system parameters. Sensitivity analysis of these dynamic system parameters may implement these techniques. Conventional structural eigenvalue problems are discussed in the scope of those systems with deterministic parameters. Large and flexible structures, such as suspension bridges, actually possess stochastic material properties and these random properties unavoidably affect the dynamic system parameters. The sensitivity matrix of structural modal parameters to basic design variables has been established in this paper. Moreover, second order statistics of natural frequencies due to the randomness of material properties have been discussed. It is concluded from numerical analysis of a modem suspension bridge that although the second order statistics of frequencies are small relatively to the change of basic design variables, such as density of mass and modulus of elasticity, the sensitivities of modal parameters to these variables at different locations change in magnitude.

• Preventive Nutrition and Food Science
• /
• v.12 no.3
• /
• pp.131-134
• /
• 2007

The kinetic analyses for thermal products of alpha-, gamma- and delta-tocopherols during heating as functions of temperature and time were studied. Alpha-, gamma- and delta-tocopherols dissolved in glycerol were heated at $100{\sim}200^{\circ}C$ for $5{\sim}60$ min. The thermal products were separated by hexane extraction and analyzed by HPLC using a reversed phase ${\mu}-Bondapak$ $C_{18}-column$ with two kinds of elution solvents in a gradient mode. The formation kinetics of thermal products of tocopherols followed a first-order kinetic model. The formation rate of thermal products of tocopherols was dependent on heating temperatures and heating times. The activation energy and enthalpy for the thermal products of ${\gamma}-and$ ${\delta}-tocopherols$ were higher than those for ${\alpha}-tocopherol$ as in the case of the oxidative degradation kinetics of tocopherol. The magnitude order of the activation energy was ${\gamma}->{\delta}->{\alpha}-tocopherol$.