• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.1
• /
• pp.87-96
• /
• 2012

The U.S. Geological Survey (USGS) announced that an earthquake of 9.0 magnitude had occurred near the east coast of Japan on March 11, 2011, resulting in a displacement of the crust of about 2.4 meters. The Korean peninsula is located on the Eurasian tectonic plate that stretches out to Japan; therefore, there is a high possibility of being affected by an earthquake. The Korean GPS CORS network operated by the National Geographic Information Institute (NGII) was processed for ten days before and after the earthquake. Both static and kinematic baseline processing were tested for the determination of crustal deformation. The static baseline processing was performed in two scenarios: 1) fixing three IGS stations in China, Mongolia and Russia; 2) fixing SUWN, one of the CORS networks in Korea, in order to effectively verify crustal deformation. All data processing was carried out using Bernese V5.0. The test results show that most of the parts of the Korean peninsula have moved to the east, ranging 1.2 to 5.6 cm, compared to the final solution of the day before the earthquake. The stations, such as DOKD and ULLE that are established on the islands closer to the epicenter, have clearly moved the largest amounts. Furthermore, the station CHJU, located on the southwestern part of Korea, presents relatively small changes. The relative positioning between CORS confirms the fact that there were internal distortions of the Korean peninsula to some extent. In addition, the 30-second interval kinematic processing of CORS data gives an indication of earthquake signals with some delays depending on the distance from the epicenter.

• Korean Journal of Community Nutrition
• /
• v.16 no.4
• /
• pp.473-487
• /
• 2011

We attempted to define the sources of sodium intake for the Korean population at prepared dish level to provide a basis for developing sustainable nutrition policies and feasible programs for sodium intake reduction. Dietary intake data from 2008 and 2009 Korea National Health and Nutrition Examination Survey was used in the analysis for sodium intake sources. Sodium intake from individual dish consumed by each subject was calculated and used in delineating major sodium sources at dish and dish group level for sub-populations of different sex and age. Also, sodium intake was compared between eaters and non-eaters of some specific dish groups with considerable contribution to total sodium intake. The number of subjects included in the analysis was 18,022 and mean sodium intake was 4,600 mg/capita/day. Major sources of sodium intake at dish group level were in the following order: kimchi (1125 mg, 24.5%), noodles (572 mg, 12.4%), soups (488 mg, 10.6%), stews (399 mg, 8.7%), and cooked rice (284 mg, 6.2%). The magnitude of contribution to total sodium intake by soups and stews was different by age group. Sodium intake difference between eaters and non-eaters was much larger for kimchi group (2,343 mg for male, 1,452 mg for female) than for soups or stews. Interaction between consumption of aforementioned specific dish groups and age was highly significant (p < 0.0005) for both sexes. This study revealed an importance of having not only the control over sodium content of foods/dishes, but also the customized approach for different groups of population to accomplish an appreciable reduction in sodium intake.

• Applied Chemistry for Engineering
• /
• v.19 no.5
• /
• pp.504-511
• /
• 2008

Two kinds of nitroazobenzene derivatives: 4-{4'-(nitrophenylazo)phenoxy}alkanoic acids (NAAn, n = 2~8, 10, number of methylene units in the alkyl chain) and 4-{4'-(nitrophenylazo)phenoxy}alkanoyl chlorides (NACn, n = 2~8, 10) were synthesized, and their thermotropic liquid crystalline behaviors were investigated. NAA6 formed an enantiotropic nematic phase, while the remainders, except NAA2, showed monotropic nematic phases. Isotropic-nematic transition temperature ($T_{iN}$) and change of entropy (${\Delta}S$) at $T_{iN}$ for both of NAAn and NACn varied by the change of n, and pronounced odd-even effects of n were also observed. However, the $T_{iN}$ and ${\Delta}S$ values of NAAn were much higher than those of NACn. This fact may be attributed to the hydrogen bonding between carboxyl groups. Thermal properties and degree of order in the mesophase and the magnitude of the odd-even effects of both NAAn and NACn were significantly different from those reported for 4-(alkoxy)-4'-nitroazobenzenes. It was discussed in terms of the differences in the molecular anisotropy and the temperature-dependent flexibility of the substituted groups.

• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.225-232
• /
• 2016

The purpose of this study is to analyze the effect of the glass ceiling induction factors on the improvement of the job Commitment on the glass ceiling perception and to analyze the effect of the organizational Commitment on the influence of the local medical institute and private medical institute employees. Purpose. As a research method, structural equation model analysis was carried out to investigate the influence relationship of each factor. In particular, multiple group analysis was performed to analyze the difference of influence relations between public and private medical personnel. Respectively. Result, First, empirical studies on the effect of the glass ceiling inducing factors on job Commitment showed that job Commitment was influenced by stereotype and organizational culture, and the magnitude of the influence was different. Second, the employees of the room medical center were influenced by perceived promotion, job placement, education and training, reward, and job satisfaction. Third, in the hypothesis that job Commitment will be affected by the perception of glass ceiling, only the workers of the private medical center showed significant results. Based on the results of this study, it will be necessary to plan policies to improve the perception of the glass ceiling phenomenon and improve its status in order to improve the personnel and system that women workers in the medical field can enter more senior management positions.

• Journal of Korean Society on Water Environment
• /
• v.32 no.5
• /
• pp.419-432
• /
• 2016

The aim of this study is to assess the influence of effluent discharge from a sewage treatment plant by evaluating oxidative stress and histopathological alterations in freshwater crucian carp Carassius auratus collected from the Eungcheon stream, located in Korea. Catalase activity in the gills, liver, and kidneys of C. auratus was collected from mixing zones; the downstream site was notably higher of fish than that of the upstream site. In addition, the activity of glutathione-S-transferase in the gills and liver was significantly higher in samples from the mixing zone than in those from the upstream site (p < 0.05). In addition, significantly elevated lipid peroxidation levels were observed in fish livers sampled from the mixing zone than in those from the upstream site (p < 0.05). Significant histopathological alternations were also observed in C. auratus, with the order of magnitude changes being liver > kidney > gills. These findings suggest that the liver is most affected by effluent discharge. The degree of tissue changes (DTC) indicate that the highest level occurred in samples from the mixing zone (30.98 ± 5.40) followed by those from the downstream site (19.28 ± 4.31) and was the lowest in samples from the upstream site (4.83 ± 2.67). These findings indicate that fish collected from the mixing zone are most affected by effluent discharge and both oxidative stress and histopathological indices are useful tools for monitoring contaminated rivers and streams.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.243-244
• /
• 2013

Over the past 15 years, several groups have incorporated radio-frequency quadrupole (RFQ) based instruments before the accelerator in accelerator mass spectrometry (AMS) systems for ion-gas interactions at low kinetic energy (＜40 eV). Most AMS systems arebased on a tandem accelerator, which requires negative ions at injection. Typically, AMS sensitivity abundance ratios for radioactive-to-stable isotope are limited to Xr/Xs ＞10^-15, and the range of isotopes that can be analyzed is limited because of theneed to produce rather large negative ion beams and the presence of atomic isobaric interferences after stripping. The potential of using low-kinetic energy ion-gas interactions for isobar suppression before the accelerator has been demonstrated for several negative ion isobar systems with a prototype RFQ system incorporated into the AMS system at IsoTrace Laboratory, Canada (Ontario, Toronto). Requisite for any such RFQ system applied to very rare isotope analysis is large transmission of the analyte ion. This requires proper phase-space matching between the RFQ acceptance and the ion beam phase space (e.g. 35 keV, ${\varphi}3mm$, +-35 mrad), and the ability to control the average ion energy during interactions with the gas. A segmented RFQ instrument is currently being designed at Korea Institute for Science and Technology (한국과학기술연구원, KIST). It will consist of: a) an initial static voltage electrode deceleration region, to lower the ion energy from 35 keV down to ＜40 eV at injection into the first RFQ segment; b) the segmented quadrupole ion-gas interaction region; c) a static voltage electrode re-acceleration region for ion injection into a tandem accelerator. Design considerations and modeling will be discussed. This system should greatly lower the detection limits of the 6 MV AMS system currently being commissioned at KIST. As an example, current detection sensitivity of 41Ca/Ca is limited to the order of 10^-15 while the 41Ca/Ca abundance in modern samples is typically 41Ca/Ca~10^-14 - 10^-15. The major atomic isobaric interference in AMS is 41K. Proof-of-principal work at IsoTrace Lab. has demonstrated that a properly designed system can achieve a relative suppression of KF3-/41CaF3- ＞4 orders of magnitude while maintaining very high transmission of the 41CaF3- ion. This would lower the 41Ca detection limits of the KIST AMS system to at least 41Ca/Ca~10^-19. As Ca is found in bones and shells, this would potentially allow direct dating of valuable anthropological archives and archives relevant to our understanding of the most pronounced climate change events over the past million years that cannot be directly dated with the presently accessible isotopes.

• Ocean and Polar Research
• /
• v.27 no.4
• /
• pp.359-379
• /
• 2005

In order to understand the spatial and temporal variations of nutrients and factors controlling their distribution in Gwangyang Bay, this study was carried out bimonthly from June 2001 to July 2003, Inorganic silicate and nitrate concentrations ranged from $0.04{\mu}M\;to\;69.5{\mu}M(avg.\;12.9{\mu}M)$, and from $0.12{\mu}M\;to\;42.2{\mu}M\;(avg.\;7.83{\mu}M)$, respectively. Silicate concentrations measured just after the typhoon were the highest with an average of $43.2{\mu}M$ at the surface layer in June 2001, whereas the highest nitrate concentration $(avg.\;37.0{\mu}M)$ was observed in the surface layer in July 2003. River runoff apparently influenced variations in silicate and nitrate concentrations (r=0.701 and 0.728, p<0.000, respectively) as well as salinity (r=-0.628, p<0.000). Phosphate concentrations ranged from $0.24{\mu}M\;to\;5.70{\mu}M\;(avg.\;1.34{\mu}M)$ and were highest at stations 5, 6, and 7, near a fertilizer plant with an average of $2.01{\mu}M$. On the basis of N/P and Si/N molar ratios, limiting nutrients have varied temporary and spatially. During 2001-2002, nitrogen was a limiting nutrient in the study area, and Phosphate was limited when a large volume of freshwater flowed into the bay. Silicate was limited when the high standing crops of phytoplankton occurred in the whole study area throughout 2003, and in the inner bay in February and August 2002. During the study period, factors controlling the distribution of nutrients might be summarized as follows; 1) inflow of freshwater by heavy rain accompanied by typhoons and frequent rainfall in summer, showing high concentrations of silicate and nitrate, 2) release of high phosphate concentrations from the fertilizer plant located in the south of Moydo to adjacent stations, 3) release of nutrients from bottom sediment, 4) magnitude of occurrence of phytoplankton standing crops.

• Journal of the Korean Magnetics Society
• /
• v.17 no.4
• /
• pp.172-177
• /
• 2007

In order to detect of the magnetic property in the cell unit, we studied the GMR-SV (giant magnetoresistance-spin valves) biosensor, which was depended on the micro patterned features according to two easy directions of longitudinal and transversal axes. Here, the multi layer structure was glass/NiO/NiFe/CoFe/Cu/CoFe/NiFe. The uniaxial anisotropy direction was applied to the patterned biosensor during the deposition and vacuum post-annealing at $200^{\circ}C$ under the magnitude of 300 Oe, respectively. Considering the magnetic shape anisotropy effect, the size of micro patterned biosensor was a $2{\times}5{\mu}m^2$ after the photo lithography process. By our experimental results, we confirmed that the best condition of GMR-SV biosensor should be the same direction of the axis sensing current and the easy axis of pinned NiO/NiFe/CoFe triple layer oriented to the width direction of device, and the direction of the easy axis of free CoFe/NiFe bilayer was according to the longitudinal direction of device.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.457-457
• /
• 2010

Flexible organic light emitting diodes (F-OLEDs) requires excellent moisture permeation barriers to minimize the degradation of the F-OLEDs device. Specifically, F-OLEDs device need a barrier layer that transmits less than $10^{-6}g/m^2/day$ of water and $10^{-5}g/m^2/day$ of oxygen. To increase the life time of F-OLEDs, therefore, it is indispensable to protect the organic materials from water and oxygen. Severe groups have reported on multi-layerd barriers consisting inorganic thin films deposited by plasma enhenced chemical deposition (PECVD) or sputtering. However, it is difficult to control the formation of granular-type morphology and microscopic pinholes in PECVD and sputtering. On the contrary, atomic layer deoposition (ALD) is free of pinhole, highly uniform, conformal films and show good step coverage. Thus, $Al_2O_3/TiO_2$ multi-layer was deposited onto the polyethersulfon (PES) substrate by electron cyclotron resonance atomic layer deposition (ECR-ALD), and the water vapor transmission rates (WVTR) were measured. WVTR of moisture permeation barriers is dependent upon density of films and initial state of polymer surface. A significant reduction of WVTR was achieved by increasing density of films and by applying low plasma induced interlayer on the PES substrate. In order to minimize damage of polymer surface, a 10 nm thick $TiO_2$ was deposited on PES prior to a $Al_2O_3$ ECR-ALD process. High quality barriers were developed from $Al_2O_3$ barriers on the $TiO_2$ interlayer. WVTR of $Al_2O_3$ by introducing $TiO_2$ interlayer was recorded in the range of $10^{-3}g/m^2.day$ at $38^{\circ}C$ and 100% relative humidity using a MOCON instrument. The WVTR was two orders of magnitude smaller than $Al_2O_3$ barriers directly grown on PES substrate without the $TiO_2$ interlayer. Thus, we can consider that the $Al_2O_3/TiO_2$ multi-layer passivation can be one of the most suitable F-OLEDs passivation films.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.1
• /
• pp.195-202
• /
• 2004

The shell due to the effect of initial normal pressures on the shell surface was based on the assumption that the directions of the pressures are always normal to the undeformed shell surface, and that the change in the surface area of the shell is negligible. But the fact that the pressure are always normal to the deforming surface leads "follower force". The follower effect in the analysis can significantly alter the solution for natural frequency and buckling load as compared to the case when the direction of the pressures are assumed to be normal to the uniform shell surface. The expression for the part of strain energy contribution from normal pressure due to the effect of follower force was derived and added to the element stiffness matrix of axisymmetric shell. In the case of increasing external pressure, the natural frequencies decrease until one of them reaches zero. Theoretically the smallest applied load that reduces the frequency of any mode to zero, will have same magnitude as that of the buckling load. In order to determine the bucking load of the shell a few sets of frequencies are computed and the results considering the follower effects are well with the exact solution while the case without that are quite different. But in case of hemispherical dome, there are little difference in buckling pressure between with and without the effect of follower force.