• Korean Journal of Materials Research
• /
• v.24 no.2
• /
• pp.87-92
• /
• 2014

The Notched Ring Test(NRT) has proven to be very useful in determining the slow crack growth behavior of polyethylene pressure pipes. In particular, the test is simple and an order of magnitude shorter in experimental times as compared to the currently used Notched Pipe Test(NPT), which makes this method attractive for use as the accelerated slow crack growth test. In addition, since the NRT specimen is taken directly from the pipe, having maintained the cross-section, processing induced artifacts that would affect the slow crack growth behavior are not altered. This makes the direct comparison to the slow crack growth specimen in pipe from more meaningful. In this study, for comparison with other available slow crack growth methods, including the NPT, the stress intensity factor equation for NRT specimen was developed and demonstrated of its accuracy within 3% of that obtained from the finite element analysis. The equation was derived using a flexure formula of curved beam bending along with numerically determined geometric factors. The accuracy of the equation was successfully tested on 63, 110, 140, 160, 250, and 400 mm nominal pipe diameters, with crack depth ranging from 15 % to 45 % of the pipe wall thickness, and for standard dimensional ratio(SDR) of 9, 11, and 13.6. Using this equation the slow crack results from 110SDR11 NRT specimen were compared to that from the NPT specimen, which demonstrated that the NRT specimen was equivalent to the NPT specimen in creating the slow crack, however in much shorter experimental times.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.113-116
• /
• 2008

According to a domestic provision, test levels of the barrier are divided into seven categories(SB1 to SB7) and the corresponding crash conditions are specified. Meanwhile, standard types of concrete barriers with different dimensions have been constructed nation wide. Some studies aimed at finding a proper test level of each type of the concrete barrier have been carried out, but the reliable and consistent results have not been fully established yet. The purpose of this study is to find out the test level corresponding to the concrete barrier of type-2 through static test. AASHTO LRFD was referred to for the loading pattern and a magnitude of the load that simulate a vehicle crash assumed. The test results show that the ultimate strength of the type-2 satisfies the load level required for SB5. However, it seems that the type-2 does not comply with SB6, showing some differences in results from previous analytical studies. In order to take advantage of the static test in establishing the test level of the domestic barrier, more detailed provisions should be specified.

• Journal of the Korean Chemical Society
• /
• v.41 no.2
• /
• pp.69-76
• /
• 1997

Kinetic studies for the nucleophilic substitution reactions of the benzoic anhydrides with anilines in methanol-acetonitrile mixtures at$35.0{\circ}C$have been carried out in order to elucidate the reaction mechanism. Individual rate constants$k_{XY}$and$k_{XZ}$were decided from the ratios of the reaction products for the competitive substitution reaction at either one of the two carbonyl carbons in benzoic anhydride. Transition state structure and reaction mechanism were elucidated by the Hammett$p_x,\;p_y$and$p_z$values and cross interaction constant$p_x\;p_y$and$p_zvalues. The reaction of the benzoic anhydride has been proposed to proceed by a frontside attack$S_N2 $mechanism with four-membered ring transition state from unusually large magnitude of the$ρ_X,\;ρ_{XY},\;ρ_{XZ}$and positive$p_Y$values.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.525-532
• /
• 1992

Fluorine-doped YBaS12TCuS13TOS17-xTFS1yT superconducting materials with y varing two orders of magnitude form 0.02 to 2.0 have been prepared by a sol-gel process by using metal nitrate salts, sodium hydroxide and sodium fluoride. Fluorine contents have been measured using an ion-selective electrode. All fluorine doped as reactant were found to be present in the resulted samples. From the observation of XRD it has been concluded that the samples with y 0.2 formed simply the single phase of perovskite structure, whereas those with y 0.5 yielded together some compounds such as BaFS12T, YFS13T and CuO in the resulted samples. The observation of solid state S019TF NMR has been carried out in order to check whether fluorine was actually incorporated into the lattice sites, and the experimental results revealed that the mole ratio of fluorine incorporated into the lattice sites of YBaS12TCuS13TOS17-xT was approximately 0.2 per mole of the compound. Also electrical resistivity measurement indicated that onset transition temperature has the tendency to increase slightly with increasing y in the dilute region as y 0.2.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.67-79
• /
• 2008

In this study, a bending test with three encased composite beams were carried out and analyzed using FEM in order to find how chemical adhesion, interface interlock, friction and composite action by shear studs contribute to stiffness, strength and composite action in the interface of encased compo site beams. The test and results of the FEM analysis showed that the difference in the ultimate moment capacity of the composite beams with and without studs is under 10%. The reason is that the effect of chemical adhesion, interface interlock, and friction in the interface on the composite action is so high that the encased beams have a moment capacity above some defined magnitude. Also, the increment of moment capacity up to plastic moment is not large and the increase of linearly proportioned.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.2
• /
• pp.149-156
• /
• 2008

Forbush Decreases (FDs) are representative events of abrupt decrease in galactic cosmic ray intensity. They are known to be strongly associated with solar wind events such as interplanetary shock (IP shock) and magnetic cloud (MC). In order to examine effectiveness of the MC on FDs, I studied the 44 MCs that occurred during the 2 years from 1998 to 1999 and investigated the properties of interplanetary magnetic field (IMF) and solar wind. As a result, I found that 11 out of 44 MCs are associated with the FDs. In particularly, it is noted that the FDs are driven by the IP shock sheaths which are associated with over 13 nT of IMF magnitude, 3 nT of IMF turbulence, and 550km/s of solar wind speed. This result indicates that magnetic cloud and its interplanetary shock sheath work as a modulator of the cosmic ray intensity.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.4
• /
• pp.17-26
• /
• 2001

In order to estimate peak ground motions and frequency characteristics of strong ground motions in southern korea, we employed the stochastic simulation method with the moment magnitude(M$_{w}$) and the hypocentral distance(R). We estimated same input parameters that account for specific properties of source and propagation processes, and applied them to the stochastic simulation method. The stress drop($\Delta$$\sigma$) of 100-bar was estimated considering results of research in ENA, China, and southern korea. The attenuation parameter x was calculated by analyzing 57 seismograms recorded from September 1996 to October 1997 and the estimation result of the attenuation parameter x is 0.00112+0.000224 R where R is hypocenter distance. We estimated strong ground motion relations using the stochastic simulation method with suitable input parameters(e.g. $\Delta$$\sigma$, x, and so on). At last, we derived relations between hypocentral distances and ground motions(seismic attenuation equation) using results of the stochastic prediction.esults of the stochastic prediction.n.

• Korean Journal of Food Science and Technology
• /
• v.20 no.6
• /
• pp.827-833
• /
• 1988

The objectives of this investigation were to develop an improved analytical method and to review with respect to experimental parameters and thermo-physical properties influencing the freezing time prediction. The results indicate that the relationship between freezing time and product size is dependent on the surface heat transfer coefficient. As the magnitude of surface heat transfer coefficient decreases, the influence of product size on freezing time becomes more profound. But the freezing time does decrease slightly as the coefficients are increased to values greater than 150 $w/m^2^{\circ}C$. In addition, influence of thermo-physical properties on the freezing time prediction shown generally density, water content, specific heat and thermal conductivity, in order of % difference. Multiple linear regression equation for freezing time prediction were obtained with respect to 4 different food materials with varying thickness.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.4
• /
• pp.352-356
• /
• 2010

In this study, it is discussed how the directional property of the sound lateralization is influenced by proceeding or succeeding tone. The acoustic source applied here is a reference sound which has 0.5 msec interaural time difference(ITD). Based on this reference sound, interfering sounds with five levels of magnitude are applied to the subjects with four kinds of inter-stimuli time intervals(ISI). The interfering sounds are also added as two different types, proceeding tone and succeeding tone. Additionally, in order to investigate a frequency influence, the reference sound and the interfering sounds are generated by using 2kHz, 4 kHz and a white noise. As a result, the influence on lateralization by proceeding tone is lager than that by succeeding tone. It can consider this result as the effect of temporal masking on lateralization. Moreover, there are small differences of masking effect on lateralization by combinations of pure tone. This result shows that the dependency of frequency domain between reference sound and interfering sound is small on the sound lateralization.

• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.130-138
• /
• 2014

This paper assessed the weights of attributes in creating transit malls. The aim of the creation was classified as travel demand management and urban revitalization. The attributes were grouped into four aspects, or 4As: attraction, amenity, accessibility, and activity. These dimensions represented land-use, urban design, transport, and socio-cultural characteristics, respectively. The analytical hierarchy process was applied to explore the weights. Accessibility(52.7%), attraction(25.6%), amenity(13.7%), and activity(8.0%) were the order of magnitude in weights for the purpose of travel demand management, while attraction(36.1%), accessibility(30.6%), amenity(17.7%), and activity(15.6%) were that of urban revitalization. The multi criteria analysis also showed different size of weights in the sub planning attributes. These results indicate that the aimin implementingtransit malls should be differentiated and highlight that the combined land-use and transport plan is essential for the successful development. Car accessibility and socio-cultural characteristics are also understood as the important factors.