• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.81-84
• /
• 2000

In this paper, we have the investigated the Influence of Filler Shape on Dielectric & Electric Charge-Discharge Properties of Filled Epoxy Resin. In the low frequency range from 50Hz to a few kHz, the magnitude of tan$\delta$ become larger in the order, NON, RAS, SAS, SCS. The electrical Discharge of RAS measured for 60 min, decreased after 10$^2$∼10$^3$.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.254-259
• /
• 2007

During the ground fault conditions, the flow of current to earth will produce potential gradients within and arround a substation. The common physiological effects of electric current on the body, stated in order of increasing current magnitude, are threshold perception, muscular contraction, unconsciousness, fabrillation of the heart. In this study, determined the tolerable voltage about earth-layered structure in the grounding system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.303-306
• /
• 1999

Traction system of 2-motor driven electric vehicle(EV) is consisted of motor(IPMSM), inverter, and battery. In order to enhance dynamic characteristics of the system, such driving conditions as acceleration ability and load(current magnitude) should be considered in the vector control algorithm for the IPMSM. So, in this paper, the most suitable structure of vector control algorithm for the EV is considered. Conformity had been verified through experimental results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.478-485
• /
• 1987

Optimization of the sub-micron N-channel MOSFET with the LDD(Lightly Doped Drain)structure has been investigated. LDD devices with various length of n-region, n-dose and n-implantation species were fabricated for this purpose. It will be shown that LDD devices have lower substrate current by an order of magnitude and higher breakdown voltage than the conventional devices with comparable channel length. Optimized LDD structure has been found when the sidewall thickness is 2500\ulcorner and n-region is phosphorus implantd with the dose of 1.0E13/cm\ulcorner It has been found that transconductance degradation is less than 20%.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.468-473
• /
• 2002

This paper presents the methodology for measuring eccentricity of the cylindricaliy machined part using CCS(Cylindrical Capacity Spindle Sensor) signal in the CNC turning process. In order to investigate the relationships between CCS orbits and eccentricities, the initial conditions for various eccentricity state and machining process is applied to the experimental strategy. AS a result, it is considered the linearities of CCS signal and magnitude of eccentricity of machined cylindrical surfaces based on the possibility as a automatic detection apparatus for the CNC lathe.

• International Journal of Safety
• /
• v.7 no.2
• /
• pp.27-30
• /
• 2008

In the 21st century, safety issues in the strained silicon industry, such as dislocation injection, should be carefully considered. This is because a microelectronic device usually contains sharp features (e.g., edges and corners) that may intensify stresses, inject dislocations into silicon, and ultimately cause the failure of the device. In this paper, critical residual stresses in various strained structures are calculated. It is confirmed that this model correctly predicts trends and the order of magnitude of critical residual stresses.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.53-56
• /
• 2000

An Electrical equipment is the noise source which makes a noise. So the optimally designed filter should be inserted in the equipment in order to reduce the noise. The noise source impedance is varied according to the frequency It effects on the CE noise. Knowing the magnitude of its impedance and inserting an EMI filter in the equipment we can estimate the insertion loss of the filter. SO it helpful in designing the EMI filter. The measurement method of a noise source impedance is proposed and verified by experiment.

• Journal of The Korean Astronomical Society
• /
• v.34 no.4
• /
• pp.301-303
• /
• 2001

We suggest a possible scenario of an astrophysical black hole with non-vanishing electric charge and magnetic flux. The equilibrium charge on a rotating black hole in a force-free magnetosphere is calculated to be Q $\~$ BJ with a horizon flux of ${\~}BM^2$, which is not large enough to disturb the background Kerr geometry. Being similar to the electric charge of a magnetar, in sign and order of magnitude, both electric charge and magnetic flux are supposed to be continuous onto a black hole.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.813-817
• /
• 1987

High value sheet resistance (Rs' 1K-33K\ulcorner/) polysilicon resistors were fabricated using double ion implantation with boron as the major dopant and phosphorus compensation. It is observed that Rs sensitivity to the net doping concentration is decreased by one order of magnitude compared to the conventional (boron implanted)polysilicon resistors. The temperature co-efficient of resistance (TCR) measured between 25\ulcorner and 125\ulcorner shows equivalent values to those of non-compensated resistors for the same Rs. A qualitative electrical conductiion mechanism for compensated polysilicon resistor is proposed, based on the existing grain boundary charge trapping theory.

• Journal of The Korean Astronomical Society
• /
• v.27 no.1
• /
• pp.55-60
• /
• 1994

The 3mm transitions to CO, $^{13}CO,\;CS,\;HCO^+$, and HCN have been observed toward the compact HII regions in W58 using the 14m Daeduk Radio Telescope (DRT). Some of the observed lines show high-velocity wings resulted from outflowing materials of the compact HII regions. We derive the beam averaged column densities of the observed species and compare their relative abundances. The $HCO^+$ abundance appears to be smaller by about an order of magnitude than those of 'typical' quiet molecular clouds. CS may be a good reference molecule in comparing relative abundances in different physical conditions.