• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.89-99
• /
• 2003

The purpose of this study was to investigate the bonding of resin- based root canal sealer, AH26 when the sealer was applied as a thin layer between dentine and gutta-percha surface. In this study forty non-caries extracted human molars and resin-based root canal sealer(AH 26, DeTrey/Dentsply, Germany) were used. Disks of gutta-percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for thermoplastic obturation were used and dentin surfaces were treated with 2% NaOCl(Group 1) or 2%NaOCl+17% EDTA(Group 3). Disks of gutta-Percha, 6mm in diameter.6mm thick (Diadent/Dentsply, Korea) for conventional obturation were used and dentin surface were treated with 2% NaOCl(Group 2) or 2%NaOCl+17% EDTA(Group 4). Enamel was removed by a horizontal section 1mm below the deepest portion of the central occlusal groove by using a watercooled low speed diamond saw. A second horizontal section was done around cementoenamel junction. Exposed dentin surface was cut to approximately $8{\times}8{\;}mm$ rectangular shape and was ground against 320, 400, 600 grade silicon carbide abrasive paper serially. After grinding, the dentine surface were soaked in a solution of 2% NaOCl for 30 minutes and twenty of specimens were treated with 17% EDTA solution for 1 minute. The treated specimens were washed and dried, Root canal sealer, AH26 was prepared according to the manufacture's instructions The Gutta-percha and dentin surface were coated with a thin layer of the freshly mixed seal or. The specimens were left overnight at room temperature. After their initial set, they were transferred to an incubator at $37$^{\circ}C$ for 72 h. After 72 hours, resin blocks were made. The resin block was serially sectioned vertically into stick of $1{\cdot}1mm$. Twenty sticks were prepared from each group. After that, tensile bond strength f3r each stick was measured with Microtensile Tester Failure patterns of the specimens at the interface between gutta-percha and dentin were observed under the SEM(x1000) and Stereomicroscope (LEICA M42O, Meyer Inst., TX U.S.A) at 1.25 x25 magnification. The results were statistically analysed by using a One-way ANOVA and Tukey's test. The results were as follows; 1. Tensile bond strengths($mean{\pm}SD$) were expressed with ascending order as follows: Group 1, $3.09{\pm}$ 1.05Mpa : Group 2, $6.23{\pm}1.16MPa$ : Group 3, $7.12{\pm}1.07MPa$ : Group 4, $10.32{\pm}2.06MPa$. 2. Tensile bond strengths of the group 2 and 4 used disks of gutta-percha for conventional obturation were significantly higher than that of the group 1 and 3 used fir thermoplastic obturation. (p < 0.05). 3. Tensile bond strengths of the group 3 and 4 treated with 2% NaOC1+17% EDTA were significantly higher than that of the group 1 and 2 treated with 2% NaOCl. (p < 0.05). 4. In analysis of failure patterns at the interface between sealer and gutta-percha, there were observed 49 (61%)cases of adhesive failure patterns and 31 (39%) cases of mixed failures patterns.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.24-34
• /
• 2010

The aim of this study was to evaluate the effect of incorporated nano HA on the demineralization resistance and bonding strength of LC GIC in comparison with micro HA. Fuji II LC GIC was used as the control group and a base material for experimental groups. Two experimental groups were prepared. One was prepared by adding 15% micro HA to LC GIC by weight ratio (Exp. 1), and the other was prepared by adding 15% nano HA instead (Exp. 2). According to the results, the following conclusions could be obtained. 1. Observing under the CLSM, the control group showed thicker enamel demineralization layer than in the experimental groups, and the Exp. 2 group showed the thinnest demineralization layer. 2. In SEM analysis, there was greater enamel demineralization in the control group. The Exp. 2 group was more resistant to demineralization compared to the Exp. 1 group. 3. The bonding strength was found to be in the increasing order of control, Exp. 1, and Exp. 2 group (p < 0.05). 4. Observing the fractured surfaces under SEM after the bonding strength test was performed, there were bone-like apatite particles formed in HA-added experimental groups, and a greater number of bone-like apatite particles were formed in the Exp. 2 group compared to the Exp. 1 group.

• Journal of Nutrition and Health
• /
• v.12 no.4
• /
• pp.29-42
• /
• 1979

In order to observe metabolic effects of an oral conceptive, Norinyle, on female Guinea pig, the changes of ascorbic acid amount and alkaline phosphatase activity in the liver and serum were determined, and histochemical changes of the uterus were observed by microscopic and electronmicroscopic methods by administration of Norinyle with or without ascorbic acid. The results obtained are summerized as follows: 1) The metabolic changes were clearly influenced by the administration of Norinyle alone, but the changes were diminshed by administration of Norinyle with ascorbic acid. 2) The adimnistration of Norinyle influenced to increases the requirment of ascorbic acid in the liver. 3) The uterus weight of the Norinyle administered group was much increased, while the weight was less increased in the group of administered Norinyle with ascorbic acid than the control. 4) The Norinyle administration was brought about an atrophy of endometrium, of uterus especially, functional layer, that the formation of glands were inadequately and the fromation of basal layer and stroma were diminished. 5) An acute infarction on the all layers of the uterus was developed at 9th and 25th days of Norinyle administration and 20th day of Norinyle with ascorbic acid administration. 6) A hypertrophy of stromal and endovascular cells were observed on the groups administered of Norinyle alone(group II ) or Norinyle with ascorbic acid(group IV). 7) It was observed that amount of collagen fiber in the basal and muscular layeres of uterus were diminished under a microscopical observation by the special stained specimen on the Norinyle administered group, but the amount and distribution of reticulin fiber were not changed significantly. 8) The fille structure of outer functional layer of the uterus were significantly changed by administration of Norinyle which were shown irregurarity of nuclear membrane, poor development ana significant expansion of enaoplasmic reticulum, decreases of the amount of ribosome due to slip off, increases of the number of dense bodies, obvious formation of vaccule, an4 decreases the amount of collagen in inner and outer layer of the stroma. 9) The amount of ascorbic acid in the serum did not much changed but the amount in the liver was much decreased by the administration of Norinyle, And the administration of Norinyle with ascorbic acid induced for a significant diminishing on the changes of uterus which might be able to developed by the administration of Norinyle alone.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.22 no.1
• /
• pp.15-21
• /
• 2000

Ameloblasotma is slowly growing, locally invasive neoplasm with a potentially destructive behavior. The epithelium of ameloblastoma is thought to have an intrinsic growth potential and has been shown to present a higher rate of proliferation as compared to odontogenic cysts with low local recurrence rate. The molecular mechanisms that regulate the cell growth and invasion of ameloblastoma cells are unknown. Bcl-2 protein, which prevent apoptosis, is expressed in immortalized ameloblastoma cell line(AM-1)(Harada et al 1998). Expression of bcl-2 protein occurs in tooth germs, whose epithelial component may act as the histogenic precursor of ameloblastoma. Bax is considered as a main effector of apoptosis. Bax forms homodimers and also heterodimers with bcl-2. p53 tumor supressor gene participates not only in cell proliferation control but also in induction of apoptosis. The objective of the present study was to evaluate the apoptosis related protein expression in odontogenic cyst and ameloblastoma. A total of 10 dentigerous cysts and 16 ameloblastomas were used in the present study. Dentigerous cyst showed negative or slight positive for p53 and bcl-2 but strongly positive for bax, ameloblastoma, on the other hand, strongly positive for p53 and bcl-2 but weekly positive for bax. Bcl-2 was expressed for ameloblastoma mainly in outer layer or whole layer of epithelium and for dentigerous cyst mainly in basal layer. The difference in expression of apoptosis related protein in dentigerous cyst and ameloblastoma might explain the peculiar aggressive growth pattern of ameloblastoma.

• Parasites, Hosts and Diseases
• /
• v.23 no.1
• /
• pp.111-122
• /
• 1985

The present study was performed to observe the ultrastructure of the integument of adult Paragonimus westermani. Dogs experimentally infected with 60 metacercariae of F. westermani were autopsied 4 months after the infection. Adult p. westermani were extracted from the dogs and the fine structure was studied by means of scanning and transmission electron microscope. The findings are as follows: 1. Scanning electron microscopic findings showed that the spines and the papillae are distributed at whole body surface but the well developed spines or papaillae are shown around the oral sucker and ventral sucker. 2. At the end of the body, excretory pore was found, the shape was irregular. 3. Transmission electron microscopic findings showed that plasma membrane, tegument, basal lamina, connective tissue, circular muscle layer, longitudinal muscle layer. nerve axon and tegumental cell were observed. 4. In higher magnification, plasma membrance and bar-shaped granules were found at the outer surface of the tegument.

• Imaging Science in Dentistry
• /
• v.30 no.3
• /
• pp.183-188
• /
• 2000

Purpose: This study was to evaluate the beam quality of intraoral X-ray equipments used at Yonsei University Dental Hospital (YUDH) using the half value layer (HVL) and the characteristic curve of intraoral standard X-ray film. Materials and Methods : The study was done using the intraoral X -ray equipments used at each clinical department at YUDH. Aluminum filter was used to determine the HVL. Intraoral standard film was used to get the characteristic curve of each intraoral X-ray equipment. Results: Most of the HVLs of intraoral X-ray equipments were higher than the least recommended thickness, but the REX 601 model used at the operative dentistry department and the X-707 model used at the pediatric dentistry department had HVLs lower than the recommended thickness. The slopes of the characteristic curves of films taken using the PANP AS 601 model and REX 601 model at operative dentistry department, the X-70S model of prosthodontic dentistry department, and the REX 601 model at the student clinic were relatively low. Conclusion: HVL and the characteristic curve of X-ray film can be used to evaluate the beam quality of intraoral X-ray equipment. In order to get the best X-ray films with the least radiation exposure to patients and best diagnostic information in clinical dentistry, X -ray equipment should be managed in the planned and organized fashion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.1
• /
• pp.15-23
• /
• 2000

Streptococcus salivarius is a normal inhabitant in the human oral cavity. Streptococcus salivarius 119 in this study was isolated from the oral cavity of child and identified, and its action mechanism on the formation of denal plaque by Streptococcus matans was studied. 1. The optical density of absorbance at 550 nm was 0.327 in the culture of Streptococcus mutans in disposable cuvette, whereas being 0.119 in the combined culture of Streptococcus mutans and Streptococcus salivarius 119. 2. The mean weight of produced artificial plaque on the wires in the beaker was 84.7mg in culture of Streptococcus mutans only, whereas being reduced to 12.3mg in the combined culture of Streptococcus mutans and Streptococcus salivarius 119. 3. When Streptococcus mutans was cultured in the media containing culture supernatant of Streptococcus salivarius 119 in BHI broth, the mean weight of produced artificial plaque was 100.5mg on the wires, whereas being reduced to 20.4mg in the media containing culture supernatant of Streptococcus salivarius 119 in BHIS broth. 4. The viable cells of Streptococcus oralis and Streptococcus salivarius 119 were $4.8\times10^7\;and\;7.5\times10^8$ per ml respectively after each culture, wheras being $4.2\times10^7\;and\;5.8\times10^7$ per ml in the combined culture of Streptococcus oralis and Streptococcus salivarius 119. 5. The polymer produced by Streptococcus salivarius 119 was glucan on the thin layer chromatography. 6. The glucan produced by Streptococcus salivarius 119 was water-soluble glucan containing $1\rightarrow6$ linkages as the main linkage on the thin layer chromatography. These results suggested that isolated Streptococcus salivarius 119 inhibited the formation of artificial plaque by the production of water-soluble glucan.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.321-331
• /
• 2005

The purpose of this study was to compare the effectiveness of mechanical and acid treatment on enamel surfaces for the retention of pit and fissure sealants and evaluate the presence of a prismless layer. The etch pattern produced on enamel from immature and mature premolar teeth extracted with varying period of acid etching using 37% phosphoric acid was examined using a scanning electron microscope(SEM). The composition of each groups was evaluated using an energy dispersive x-ray(EDX) spectroscopy. The result of present study can be summarized as follows: 1. Prismless layer was commonly observed on the fissure enamel in young and mature premolar. 2. There were no differences in micro-structure and etching pattern on fissure enamel between the young and the mature premolar. 3. The most effective etching pattern for retention of pit and fissure sealant was observed in 60 seconds of etching time and no apparent difference of etching pattern was found among 15, 30, and 45 seconds of etching time which showed non-retentive etching patterns. 4. The etching pattern obtained by grinding enamel surface with bur followed by 60 seconds of etching was similar to that of 60 seconds of etching without any pretreatment of fissure surface. 5. Type 2 etching pattern was commonly found on fissure enamel in both young and mature premolar. 6. The calcium content and P/Ca ratio in fissure enamel between the young and the mature premolar were significantly different(P<0.05). But content of calcium, phosphate and P/Ca ratio on various regions of fissure enamel in both young and mature premolar did not showed any difference. Based on these results, prismless layer may negatively influence the retention of pit and fissure sealants. Therefore, the mechanical removal of the prismless layer by grinding prior to etching or by prolonged etching time of enamel within the fissure system should result in an improved bonding of a pit and fissure sealant.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.3
• /
• pp.189-199
• /
• 2006

Purpose of study: Partial thickness skin graft is the golden standard regimen for full-thickness skin defect caused by burn or trauma. However, in case of extensive burns of more than 50% of total body surface area, the donor site is not sufficient to cover all defects. As a second choice, allograft, xenograft and synthetic materials have been used to treat skin defect. Among them the amniotic membrane(AM) was used as a biological dressing for centuries because of its potential for wound healing. In this study, quantification of EGF in AM and effect of AM-collagen complex on full thickness skin defects was examined. Materials & Methods: The concentration of EGF in fresh, deep frozen and freeze-dried AM was evaluated by ELISA. EGF-R immunostaining was performed in freeze-dried AM. SD rats weighing 250${\sim}$300g was used for wound healing experiment. Three full thickness skin defects(28mm diameter) were made on dorsal surface of SD rat. The control group was covered by Vaselin gauze and AM-collagen complex and $Terudermis^{(R)}$. was grafted in two other defects. Healing area, Cinamon's score were evaluated before biopsy. Grafted sites were retrieved at 3 days, 1 week, 2 weeks and 4 weeks after operation. H & E and Factor VIII immunohistochemical stain was performed to evaluate the microscopic adhesion and structural integrity and microvessel formation. Results: 1. EGF concentration of fresh, deep frozen and freeze-dried AM showed similar level and EGF-R was stained in epithelial layer of freeze-dried AM. 2. At 4 weeks after grafting, the healing area of AM-collagen and Terudermis group was 99.29${\pm}$0.71% and 99.19${\pm}$0.77 of original size. However, that of control group was 24.88${\pm}$2.90. 3. The Cinamon's score of AM-Collagen and $Terudermis^{(R)}$. group at 4 weeks was 15.6${\pm}$1.26 and 14.6${\pm}$3.13 and that of control group was 3.7${\pm}$0.95. Significant difference was observed among control and experimental groups(p<0.05). 4. Histologic examination revealed that AM protected leukocyte infiltration and epithelial migration was nearly completed at 4 weeks. $Terudermis^{(R)}$. group showed mild neutrophil infiltration until 2 weeks and completion of epithelization at 4 weeks. Control group showed massive leukocyte infiltration until 4 weeks. 5. Microvessels were increased sharply at 1 week and control group at 1 and 4 week showed significant differences with $Terudermis^{(R)}$. group of same interval(p<0.05) but no differences were found with AM group(p<0.05). Conclusion: EGF and EGF-R were well preserved in freeze-dried AM. AM attached to collagen acted as excellent biologic dressing which had similar effect with $Terudermis^{(R)}$. AM showed anti-inflammatory action and healing was completed at 4 weeks after full-thickness skin defect.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.3
• /
• pp.214-220
• /
• 2001

The clinical application of the three-dimensional radiographic technique had been limited to standard Broadbent-Bolton cephalometer with biplanar stereoradiography. We developed a new method for compensating the error of head position in ordinary non-biplanar cephalostat. It became to possible to use the three dimensional cephalogram commonly in clinical bases. 1. The method of methemetical compensation of head positioning error in non-biplanar condition was evaluated with dry skull. The error of the method of first and the second trial was $0.46{\pm}1.21$, $0.33{\pm}0.90mm$, which means the error of the head positioning correction in conventional cephalogram was within clinical acceptance. 2. The reproducibility of this system for clinical application was 0.54 mm ($-2.99{\sim}2.26mm$) which defines the absolute mean difference of the first and second trial. Compare to the The landmark identification error $1.2{\pm}1.6mm$, the error of the measurement was within the range of landmark identification error. The result indicates the adequate clinical accuracy of the computation of three-dimensional coordinates by compensation of the error of the head position in ordinary non-biplanar cephalostat.