• 한국의학물리학회지:의학물리
• /
• 제13권1호
• /
• pp.15-20
• /
• 2002

전신 정위 방사선 시술 시 적정 치료 조사면에 대한 연구를 실시하였다. 치료표적 직경이 1cm에서 7cm까지 1cm 간격인 경우에 다양한 크기의 치료 조사면 크기에서 만들어낸 선량 분포를 분석하였다. 치료조사면은 표적 크기에서 -1cm~2cm를 각각 더한 크기로 하였다. 치료 계획의 성적은 TCI(Target Conformity Index)로 표현하였다. 모든 표적 크기에서 -0.5cm~0.5cm를 더한 치료 조사면에서 가장 높은 TCI를 보였다. 6cm 이상의 표적 크기에서는 -0.5cm 또는 0cm를 더한 조사면에서 우수한 성적을 보였으며, 표적 크기 2cm 이하에서는 0cm 또는 0.5cm를 더한 조사면이 좋은 결과를 보였다. 표적 크기와 관계없이 동중심점 선량의 80%～90%에 처방하는 것이 가장 효율적으로 나타났다.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.51-56
• /
• 2015

The object of this study is to obtain the optimum mix proportion of halogen free compound with flame resistance and, for the purpose, thermal/electrical characteristics test are conducted using compatibilizing agents, flame resistance agents, hydroxide aluminum, sunscreen, antioxidant and silicon oil on the base resin of linear low density polyethylene (LLDPE), Ethylene vinyl acetate copolymer (EVA). Existing compound method accompanies many requirements to be satisfied including a lot of addition of flame resistance agents, prohibition of impact on mixing capability with base and property and etc. In this study, different from the existing method, the optimum mix proportion is determined and experimented by adding nano clay. Oxygen index test shows no difference between specimens while T-6, T-9 shows oxygen index of 29[%] and 26[%], respectively. This is concluded that hydroxide aluminum, which is a flame resistance agent, leads low oxygen index. From UL94-V vertical flame resistance test, the combustion behavior is determined as V-0, Fail based on UL94-V decision criteria. Viscometry shows low measurements in specimens with separate addition of compatibilizing agents or nano clay. Volume resistivity test shows low measurement mainly in specimens without compatibilizing agents. Therefore, with the flame resistance compound shows better performance for thermal/electrical property and the optimum mix proportion are achieved among many existing materials.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1613-1616
• /
• 1997

In order to develop a human hand mechanism, a 5-bar finger with redundant actuation is designed and implemented. an optimal set of acutator locations and link lengths for the case of one redundant actuator is obtained by employing a composite design index which simulataneously consider several performance indices such as workspace, isotropic index, and force transmission ratio. Each joing is driven by an compact actuator mechanism having ultrasonic motor and a gear set with poeneiometer an controlled by VME Bus-based control system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.374.1-374
• /
• 2002

The eventual purpose of this research is to make optimum standards for acoustic-environment by using not only physical characteristics but also subjective appraisals. First, basic Physical data were measured which were necessary to establish standards for acoustic environment in campus buildings, TSP has used to measure sound levels, reverberation times, clearness indexes, and speech-transmission-index. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.147-156
• /
• 2007

This study offers a design procedure of optimum cable damper for multi-mode vibration control with nonlinear damper and also investigate the relation between mode and amplitude dependency. The proposed multi-mode damping index, which is defined as a energy loss ratio of cable potential, is a main component of optimization problem of optimum nonlinear damper. In order to include the amplitude dependency of nonlinear damper, it is assumed to exist three kinds of multi-mode patterns such as ambient vibration, support excitation and rain-win induced vibration. The optimum damper exponent depends on amplitude patterns. In case of ambient vibration, optimum factor is less than 0.5. In case of support excitation or rain-wind induced vibration is between 0.5 and 1.0. In this study, the effects of cable sag and inclination angle are included in the asymptotic design equation of damped cable structures.

• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.785-796
• /
• 2007

This study offers a design procedure of optimum cable damper for multi-mode vibration control with nonlinear damper and also investigates the relation between mode and amplitude dependency. The proposed multi-mode damping index, which is defined as a potential energy loss ratio of cable vibration, is a main component of optimization problem of optimum nonlinear damper. In order to include the amplitude dependency of nonlinear damper, three types of multi-mode patterns such as ambient vibration, support excitation and rain-wind induced vibration are assumed. The optimum damper exponent depends on amplitude patterns. In case of ambient vibration, optimum factor is less than 0.5 and in case of support excitation or rain-wind induced vibration it is between 0.5 and 1.0.

• 한국지역지리학회지
• /
• 제7권1호
• /
• pp.35-50
• /
• 2001

공간상의 지리현상은 축척에 따라 공간적 분포패턴이 다르게 표현되고 측정될 수 있다. 특정한 지리현상은 특정한 축척에서 보다 선명하게 관찰될 수 있다. 지표면의 정보를 담고 있는 위성영상 역시 공간해상도의 영향에 의해 독특한 특성을 보이고 있다. 위성영상의 분석을 위한 적정해상도를 모색하기 위해서는 영상으로부터 분류되는 속성의 특성을 파악하여야 한다. 본 연구에서는 순천만 해안습지를 대상으로 위성영상으로부터 토지피복 정보를 추출하고, 공간 해상도의 변화에 따른 변화를 살펴보았다. 순천만 영상을 대상으로 토지피복 분류정확도를 파악한 후 30m 해상도부터 480m 해상도까지 30m 간격의 16가지 해상도로 영상을 제작하여 분류정확도의 변화를 살펴보았다. 순천만 해안습지는 다양한 토지유형이 다양한 크기로 분포하고 있어 해상도의 변화에 따라 토지피복 특성이 변화하고 있으며, 순천만의 위성영상 역시 축척 효과에 의해 해상도에 따라 속성정보의 특성의 변화가 뚜렷하게 나타난다.

• KSBB Journal
• /
• 제29권5호
• /
• pp.385-391
• /
• 2014

In this study, the emulsion dispersion stability of optimizing storage temperature was investigated. The system was based on oil/water (O/W) emulsions. In order to evaluate the stability, mean diameter of droplet was measured as a function of temperature with various mixed hydrophilic lipophilic balance (HLB). In addition, the correlations between phase inversion temperature (PIT) and the optimum storage temperature were probed. In this system, majority of the smallest droplet was shown at temperature of $20^{\circ}C$ below PIT. Whether the temperature was increased or decreased from the optimum, size of the droplet increased. According to the mixed HLB, the particle size and optimum storage temperature were also affected. As the concentrations of surfactant were increased, the size of particle decreased with lower optimum temperature for storage. If the surfactant (4 wt%) were mixed with HLB, the optimum storage temperature was $21^{\circ}C$ for maintaining the size of smallest droplet at 108.3 nm in diameter. At above optimum condition, increased size of particle was observed approximately 4 % increases from 108.2 nm to 112.3 nm after 600 hours. The size of particle in emulsion was maintained stably without any considerable effect of Ostwald ripening phenomena at the optimum storage temperature with low polydispersity index.

• 해양환경안전학회지
• /
• 제20권6호
• /
• pp.685-691
• /
• 2014

해상에서 발생하는 위기의 확률적인 평가결과는 확률(P=0.0~1.0)로 나타난다. 이러한 확률적인 위기평가결과는 위험한 정도를 쉽게 알기 위하여 일반적으로 평가의 기준이 되는 위기허용수준(Risk Acceptance Criteria, RAC)을 이용하여 지수(index)로 나타낸다. 현재 RAC은 3단계, 5단계, 7단계 등으로 구분하는데, 구분한 단계 수가 위기평가에 적합한지를 평가할 필요가 있음에도 불구하고 관련 연구가 전무한 실정이다. 본 연구에서는 RAC의 단계 구분 수에 따른 민감도(Sensitivity)와 민감도의 분포특성을 이용하여 최적의 RAC 구분 단계 수를 정할 수 있는 평가기법을 제안하였다. 사전 연구결과로부터 획득한 확률적인 위기평가 데이터에 대해서 제안한 기법을 적용한 결과, 민감도가 10배 이내로 형성되는 최적의 RAC 구분 단계 수를 결정할 수 있었고, 이를 통해서 제안한 방법의 유효성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.784-791
• /
• 2013

Recent advanced IT made layout design fast and accurate by using algorithms. Layout design should be determined by considering the position of equipment with satisfying various space constraints and its component works with optimum performance. Especially, engine room layout design is performed with mother ship data, theoretical optimal solution, design requirements and several design constraints in initial design stage. Piping design is affected by position of equipment seriously. Piping design depends on experience of designer. And also piping designer should consider correlation of equipment and efficiency of space. In this study, space evaluation method has been used to evaluate efficiency of space. And also this study suggested object function for optimal piping route, Average Reservation Index(ARI), Estimated Piping Productivity(EPP) and with modified space evaluation method. In this study, optimum pipe routing system has been developed to reflect automated piping route with space efficiency and experience of piping designer. Engine room is applied to the design of the piping in order to confirm validity of the developed system.