• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.3
• /
• pp.234-240
• /
• 2014

We investigated the effects of feeding rate on the growth performance, blood components, and histology of growing olive flounder Paralichthys olivaceus. We determined the optimum feeding rate (initial fish mean weight of $240{\pm}10.9$ g) at the optimum water temperature. Two replicated groups of fish were fed a commercial diet at rates of 0%, 0.5%, 0.75%, and 1.0% body weight (BW) per day, and to satiation. Feeding trial was conducted using a flow-through system with 10 1.2-metric ton aquaria receiving filtered seawater at $19-21^{\circ}C$ for three weeks. Weight gain (WG) for fish fed to satiation was significantly higher than that of unfed fish and fish fed at 0.5% and 0.75% BW per day. The WG of fish fed at 1.0% BW per day was significantly higher than that of unfed fish and of fish fed at 0.5% BW per day. However, there were no significant differences in WG between fish fed at 0.5% BW per day and those fed at 0.75% BW per day, between fish fed at 0.75% BW per day and those fed at 1.0% BW per day, and between fish fed at 1.0% BW per day and those fed to satiation. The specific growth rates of fish fed at 1.0% BW per day and those fed to satiation were significantly higher than those of unfed fish and of fish fed at 0.5% BW per day. Broken-line regression analysis of weight gain showed that the optimum feeding rate of olive flounder weighing 240 g was 1.09% BW per day at the optimum water temperature.

• Journal of Aquaculture
• /
• v.18 no.1
• /
• pp.31-36
• /
• 2005

A feeding trial of two feeding rate (satiation and $80\%$ satiation) $\times$ four feeding frequency (three meals a day, two meals a day, one meal a day and one meal every two days) factorial design with three replications was carried out to investigate the optimum feeding frequency and rate for growth of flounder during the winter season. Juvenile flounder averaging 45 g were fed a extruded pellet for 60 days. Weight gain was affected by both feeding frequency (P<0.001) and feeding rate (P<0.01). The best weight gain obtained from fish fed two meals a day with satiation was not different from that of fish fed three meals a day with satiation and $80\%$ satiation. Feed efficiency and protein efficiency ratio of fish fed the diet three times daily were the highest among groups, but not different to other groups of fish except for one meal every two days with satiation and $80\%$ satiation feeding. Daily feed intake was affected by both feeding frequency and feeding rate (P<0.001), these values of fish fed two and three meals a day with satiation were the highest among the groups. Moisture, crude protein, crude lipid and ash contents of fish were not affected by both feeding frequency and feeding rate (P>0.05). The results of this study indicate that the optimum feeding frequency for the growth of juvenile flounder grown from 45 g to 53 g is two meals a day with satiation feeding during the winter season.

• Journal of Aquaculture
• /
• v.21 no.4
• /
• pp.244-251
• /
• 2008

We evaluated the optimum dietary lipid level and feeding rates of extruded pellets (EP) in juvenile flounder Paralichthys olivaceus during the summer season. The first experiment was conducted to determine the optimum dietary lipid level in juvenile flounder. Five isonitrogenous EP (52% crude protein) with increasing dietary lipids (6, 8, 10, 12 and 14%) were fed to satiety to triplicate groups of the juveniles ($18.4{\pm}0.11g$) twice a day for 6 weeks. Weight gain (WG) of fish fed EP with 10% lipid was significantly higher than those of fish fed EP with 6 and 14% lipid (P<0.05). Broken line model analysis suggested that the optimum dietary lipid level could be $9.08{\pm}0.37%$ for the maximum WG in juvenile flounder. The second experiment was conducted to determine the optimum feeding rate using experimental diet contained 10% lipid level that had the highest WG in first experiment. The feed intake of triplicate groups of the juveniles ($13.4{\pm}0.15g$) was restricted to four different feeding rates of 2.0, 2.5, 3.0 and 3.5% of their body weight $day^{-1}$ and to satiation using experimental diets. WG and feed efficiency (FE) of fish was affected by feeding rates. WG and specific growth rate of fish fed the diets increased with increasing feeding rate, however no significant differences (P>0.05) in WG and specific growth rate were observed between the fish fed 3.5% of their body weight $day^{-1}$ and to satiation. FE of fish fed 3.5% of their body weight $day^{-1}$ was significantly higher than those offish fed 2.0% of their body weight $day^{-1}$ and to satiation (P<0.05). Broken line model analysis suggested that the optimum dietary feeding rate could be $3.56{\pm}0.06%$ for the maximum WG in juvenile flounder. These results indicated that the optimum lipid level and feeding rate could be $9{\sim}10%$ (Energy: 4,774kcal and PIE ratio: 108mg protein/kcal in diet) and 3.5% of their body weight $day^{-1}$in juvenile flounder, respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.5
• /
• pp.690-699
• /
• 2014

Three feeding trials were conducted to evaluate the effects of feeding rate and water temperature on growth and body composition of juvenile Korean rockfish, Sebastes schlegeli rearing at 3 different water temperatures. A total of 270 fish (each experiment) individual body weight (BW) averaging $16{\pm}0.3g$ ($mean{\pm}SD$) were fed a commercial diet for 4 wk at $16^{\circ}C$, $20^{\circ}C$, and $24^{\circ}C$. At each temperature, triplicate tanks were assigned to one of 6 feeding rates: 1.5%, 2.5%, 2.8%, 3.1%, 3.4%, and satiation (3.7% BW/d) at $16^{\circ}C$, 1.9%, 2.9%, 3.2%, 3.5%, 3.8% and satiation (4.1% BW/d) at $20^{\circ}C$ and 1.7%, 2.7%, 3.0%, 3.3%, 3.6%, and satiation (3.9% BW/d) at $24^{\circ}C$ water temperature. Weight gains of fish in satiation and 3.4% groups at $16^{\circ}C$, in satiation and 3.8% groups at $20^{\circ}C$ and in satiation and 3.6% groups at $24^{\circ}C$ were significantly higher than those of fish in the other treatments (p<0.05). A broken line regression analysis of weight gain indicated that optimum feeding rates of juvenile Korean rockfish were 3.41% at $16^{\circ}C$, 3.75% at $20^{\circ}C$ and 3.34% at $24^{\circ}C$ water temperature. Results of the present study indicate that the optimum feeding rate could be >3.1% but <3.41% at $16^{\circ}C$, >3.5% but <3.75% at $20^{\circ}C$ and >3.0% but <3.34% at $24^{\circ}C$. As we expected results suggest that fish performed better at $20^{\circ}C$ than $16^{\circ}C$ or $24^{\circ}C$ water temperature and the optimum feeding rate could be 3.1% BW/d to 3.7% BW/d in 16 g of juvenile Korean rockfish.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.47 no.6
• /
• pp.1063-1068
• /
• 2014

We investigated the effects of feeding rate on the growth performance and blood components of sub-adult olive flounder Paralichthys olivaceus. Optimum feeding rate (initial fish mean weight : $370{\pm}5.72g$) was determined under the low water temperature. Two replicated groups of fish were fed a commercial diet at rates of 0%, 0.3%, 0.4%, 0.5%, and 0.6% body weight (BW) per day, and to satiation (0.75%). Feeding trial was conducted under a flow-through system with 12 1.2-metric ton aquaria receiving filtered seawater at $12-14^{\circ}C$ for 4 weeks. Weight gain (WG) and specific growth rate (SGR) for fish fed at 0.6% BW per day was significantly higher than that of unfed fish (0%) and fish fed at 0.3% and 0.4% BW per day. There were no significant differences in WG and SGR among fish fed at 0.5%, 0.6%, and 0.75%. These parameters were negative and significantly lower in the starved fish than in fish fed the experimental diet at all feeding rates. Survival for unfed fish (0%) was significantly lower than that of fish fed at 0.4%, 0.5%, and 0.6%. Hematocrit and hemoglobin content of fish fed at 0% and 0.75% (satiation) were significantly lower than that of fish fed at 0.4% BW per day. Total protein content in unfed fish was significantly lower than those in other treatments. Broken-line regression analysis of weight gain showed that the optimum feeding rate of olive flounder weighing 370 g was 0.51% BW per day at the low water temperature.

• Journal of Welding and Joining
• /
• v.14 no.4
• /
• pp.53-61
• /
• 1996

It was attempted to improve the wear resistance of Al alloy under the load condition by making a formation of the thicker surface hardening alloy layers. The thicker surface hardening alloy layers were formed on 6061 Al alloys overlayed by MIG and TIG welding process with Cu powders feeding. The characteristics of hardening and wear resistance have been investigated in relation to the microstructures of alloyed layers, with a selection of optimum alloying conditions for formation of overlaying layer. The results obtained were summarized as follows With increasing feeding rate of Cu powders by MIG welding, the hardness and specific wear of the overlay weld alloys were increased. It is considered that these high hardness and specific wear of overlay weld alloys were due to the formation of Θ($Al_2Cu$) phases. With increasing feeding rate of Cu powders by TIG welding, the hardness and specific wear of the overlay weld alloys were increased in feeding rates 12 and 18g/min. However, the hardness and specific wear were decreased in the powder feeding rate 38g/min. It is considered that considered that decrease of hardness and specific wear in the powder feeding rate 38g/min due to formation of ${\gamma}$($Al_4Cu_9$) phases.

• Journal of Aquaculture
• /
• v.18 no.4
• /
• pp.231-235
• /
• 2005

A 6-week feeding trial was conducted to determine optimum feeding frequency for growth of juvenile flounder Paralichthys. olivaceus during the summer season. Triplicate groups of fish (initial mean weight 3.7 g) were fed a extruded pellet with 5 feeding frequencies (one meal every 2 days, one meal a day, two meals a day, three meals a day and four meals a day) at $24.0\pm0.50^{\circ}C$ (mean$\pm$SD). Survival of fish fed one meal every 2 days was significantly (P<0.05) lower than that of the other groups. Weight gain, specific growth rate and daily feed intake increased with increasing feeding frequency (P<0.05). However, no significant differences were observed in weight gain, specific growth rate and daily feed intake of fish fed among two, three and four meals a day. feed efficiency and protein efficiency ratio were not affected by feeding frequency. Whole body contents of moisture, crude protein, crude lipid and ash were not significantly affected by feeding frequency. These results indicate that optimum feeding frequency is two meals a day for the optimum growth of juvenile flounder grown from 3.7 to 19.0 g under the experimental conditions.

• Journal of Welding and Joining
• /
• v.15 no.1
• /
• pp.116-124
• /
• 1997

A scope of this study is to establish the optimum plasma spray conditions for fine ($5\mu\textrm{m}$) $Al_2O_3$ powder. However, the flowability of the $Al_2O_3$ powder is not so good because of irregular particle shape and fine particle size. Therefore, powder feeding system was modified by 1) change of powder feeding line material from polymer to copper 2) shorten the powder feeding tube length 3) heating the powder feeding system to $80^{\circ}C$4) vibrating the powder feeding line continuously, in order to feed the fine powder homogeneously. The homogeneous powder feeding conditions were obtained with the modified powder feeding system by controlling the powder carrier gas flow and the powder flow rate indicator. The best plasma spraying conditions for the fine $Al_2O_3$ powder were found out as 40kw gun power, 80 g/min. powder feed rate and 50 mm working distance after characterizing the microstructure, hardness and wear loss of the $Al_2O_3$ coating layer.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.271-278
• /
• 2001

Many workers in the garlic peeling factory are separating the sound peeled garlics from the unpeeled and defective ones in a manual way. In order to reduce the seasonal labor requirement and operating cost, the mechanized garlic sorting system such as the vision-based garlic sorter should be developed. This study was conducted as one of basic studies on developing quality evaluation technique for peeled garlics, especially to developed the system for acquiring the whole surface images of garlics with a CCD camera. The following results were obtained from this study. 1. The belt-type garlic rotation system was devised to apply for the vision-based garlic sorter and was tested to decide the criteria of design and optimum conveying speed. 2. To evaluate the performance of the developed garlic rotation system, feeding rate and rotating rate were measured under the conditions of four experimental factors such as the inclined angle of rotating belt, the inclined angle of feeding belt, the height of plate arrays on feeding belt and the conveying speed of belts. And the capacity of the system according to mixture ratios of peeled garlics and unpeeled garlics was analyzed as a feasibility test. 3. For the inclined angle of rotating belt 20°and height of plate array on feeding belt 22㎜, the maximum rotating rate for garlic samples including unpeeled ones was 81.1% at the conveying speed of 4.2 garlic/sec. And under these condition, the maximum feeding rate was 85% at the inclined angle of feeding belt 6.5°. 4. The capacity of the developed garlic rotation system was almost constant regardless of mixture ratio of peeled garlics and unpeeled garlics and its range was 2.95∼3.92 garlic/sec. At the conveying speed of 4.2 garlic/sec, the capacity of the garlic rotation system was calculated ad 58∼64 kg/hr. 5. To improve performance of the garlic rotation system, it is recommended to develop a device to slide garlics into feeding belt.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.3
• /
• pp.217-222
• /
• 2010

Two 15-week feeding trials were conducted to investigate how the rate and frequency of feeding affected the winter growth of olive flounder ($13^{\circ}C$). In the first experiment, triplicate groups of fish (initial mean weight $117{\pm}6.0$ g) were fed extruded pellets twice a day at feeding rates of 0.1, 0.25, 0.4, 0.55, and 0.57% (satiation) body weight per day (BW/d). The weight gain, specific growth rate, and feed efficiency increased significantly (P<0.05) with the feeding rates from 0.1 to 0.55% BW/d, but no significant differences in these parameters were found for fish fed diets of 0.55% BW/d and satiation. The moisture and ash contents of whole body of fish tended to decrease as the feeding rate increased, but the opposite trend was found for crude lipid content. In the second experiment, triplicate groups of fish (initial mean weight $117{\pm}6.3$ g) were fed extruded pellets to apparent satiation at the three different feeding frequencies: one meal 2 days, one meal a day and two meals a day. The weight gain and specific growth rate of fish fed one meal 2 days were significantly (P<0.05) lower than those of fish fed one or two meals a day, whereas no significant differences in the weight gain and specific growth rate were found between fish fed one and those fed two meals a day. Feed efficiency and condition factor were not significantly affected by feeding frequency. Based on these results, a feeding rate of 0.3% BW/d is recommended as maintenance feeding level, and the optimum feeding frequency is one meal a day with satiation feeding for the growth of olive flounder (117-147 g) during winter ($13^{\circ}C$).