• Journal of information and communication convergence engineering
• /
• 제2권2호
• /
• pp.106-109
• /
• 2004

This study designs a load balancer via direct routing that share a virtual service on a single IP address in the Linux system and suggests an efficient load balancing method to improve transmission speed in the web server cluster environment. It will increase performance and scalability with fast packet transfer and removing bottleneck problem by using TCP Splicing and Content-Aware Distributor method. This method is expected to be the noticeable technology that provides an important interface, which make application services for e-commerce effectively be applied to high-speed network infrastructure. At this time, it is required to study further on the optimum balancing method in the web server cluster environment so as to apply the hybrid (optimum load balancing method by software and hardware) method and improve the reuse of security cession based on high-speed TCP connections.

• 한국통신학회논문지
• /
• 제40권12호
• /
• pp.2324-2330
• /
• 2015

충격성 잡음하의 블라인드 신호처리 분야에서 최대 상호 코렌트로피 알고리듬 (MCC)이 MSE 기반의 알고리듬에 비해 우수한 성능을 보인다. 그러나 MCC 알고리듬에 대한 최적 가중치 조건들이나 충격성 잡음에 대한 내성과 관련된 특성들은 아직 충분히 연구되지 못한 상태이다. 이 논문에서는 MSE기반의 LMS 알고리듬과 비교를 통해 MCC의 최적 가중치의 성질을 분석하여 MCC 알고리듬의 최적 가중치가 MSE기반의 LMS 알고리듬과 같다는 보인다. 또한 MCC의 최적 가중치가 충격성 잡음 하에서도 동요 없이 안정을 유지하는 요인이 입력 크기 조정에 있다는 것을 시뮬레이션을 통해 입증하였다.

• Journal of Biosystems Engineering
• /
• 제27권2호
• /
• pp.125-132
• /
• 2002

In order to investigate the optimum moisture content of paddy for milling process, a series of tests were conducted by examining the recovery rate and whiteness of milled rice in relation with the various moisture content. Hwabong-byeo and Dongjin-byeo varieties which were major paddies cultivated in Korea were used for the experiment. The test was performed with small experimental milling machines. In order to minimize the unexpected factors, environment conditions were kept in constant during the experiment. As a result, the recovery rate of milled rice were varied as the changes in milling time and degree of whiteness. However, the recovery rate of milled rice increases as its moisture content increases untill a certain point of moisture content and decreases slowly afterward. This certain point can be called optimum moisture content for rice milling. Also, it has a different value depending on the variety. In this experiment, optimum moisture content of Hwabong-byeo and Dongjin-byeo were considered around 14.8% and 15.3%, respectively. It is not sure that these optimum moisture contents for the two varieties would assume the same values irrespective of harvest year and place. However, it could be concluded that the optimum moisture content for rice milling is around 15%(w.b.) for Hwabong-byeo and 15.5%(w.b.) for Dongjin-byeo, respectively.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2007년도 추계학술대회 논문집
• /
• pp.444-445
• /
• 2007

• 생물환경조절학회지
• /
• 제18권1호
• /
• pp.23-28
• /
• 2009

이전 실험에서 결정된 생육 단계별 최적 환경조건을 평가하기 위한 4가지 처리는 다음과 같았다: 생육 단계별 최적 환경 조건을 사용한 광독립 영양배양(photoautotrophic optimum condition with growth stage (POG)), 생육 단계별 평균 광합성 광량자속 밀도(photosynthetic photon flux density(PPFD))와 $CO_2$ 농도를 사용한 광독립 영양배양(photoautotrophic constant condition with average PPFD and $CO_2$ of POG(PCA)), 생육 단계별 최대 PPFD와 $CO_2$농도를 사용한 광독립 영양배양(photoautotrophic constant condition with maximum PPFD and $CO_2$ of POG(PCM)) 그리고 대조군으로 3%의 당을 포함한 광혼합 영양배양(photomixotrophic conventional condition with 3% sucrose(PMC)). 실험 결과 각 생육 단계별 환경제어(POG)는 기내에서 배양된 감자 소식물체의 모든 생육 관련 항목에서 유의적 증진을 유도하였다. 또한 단위 건물중 당 소비된 전력과 $CO_2$는 모든 처리 중 POG에서 가장 낮았다. 기외 이식 이후에도 POG에서 생산된 감자 묘는 PMC에서 자란 감자 묘와 전체적으로 큰 차이 없이 왕성한 생육을 유지하였다. 특히 POC는 기존 광혼합 영양방식(PCM)과 비교했을 때 기외 이식전과 이식 후 20일째 각각 4.7배와 3.8배 높은 건물중을 기록하였다. 따라서 POG와 같은 생육 단계별 환경 조절을 통한 광독립 영양 미세 증식 방법은 에너지 절감 효과와 함께 무균의 건강한 감자 묘의 생산에 효과적이었다.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.5-13
• /
• 2017

Purpose: Various studies have been performed to address the issue of increased energy use by buildings. In particular, research on complex envelopes that combines diverse envelope element techniques is currently in progress in the building sector. The present study aimed to develop an awning system using a light shelf, and to verify its validity through performance evaluation. Method: In the present study, a testbed was established for the performance evaluation of the awning system using a light shelf, and the uniformity ratio and lighting energy consumption were compared and analyzed relative to those with no awning and light shelf installation (Case 1), awning installation (Case 2), and light shelf installation (Case 3). Result: 1) In the present study, an awning system using a light shelf (Case 4) where an opening is made on the awning screen and natural light can be introduced through the light shelf located at the bottom was developed. 2) The optimum standard for Case 4 obtained through the performance evaluation was a 0.6m lighting length and a 2m extension length at a light shelf angle of $30^{\circ}$. 3) Case 4 with the optimum standard had a 5.5% lower uniformity ratio than Case 2, but had a higher uniformity ratio than Case 1 and Case 3. 4) Case 4 with the optimum standard showed 13.3%, 44.6%, and 0%~8.7% lighting energy reductions compared to Case 1, Case 2, and Case 3, respectively. 5) Based on the above results, Case 4 suggested in the present study was found to be effective for indoor light environment improvement and lighting energy reduction.

• 한국양식학회지
• /
• 제22권1호
• /
• pp.63-67
• /
• 2009

In order to establish optimum anesthesia concentration, we tested the efficacy of clove oil at five different concentrations in large sized (mean SL $17.1{\pm}2.21\;cm$) and small sized (mean SL $0.6{\pm}0.06\;cm$) dark-banded rockfish Sebastes inermis. Optimal anesthesia concentration for dark-banded rockfish was $150\;mgL^{-1}$ in both large and small sized fish. In general, fish exposed to higher anesthetic doses were rapidly induced but took longer to recover (P<0.05). Recovery time of small sized fish was longer than large sized fish in lower concentrations, while recovery time of large sized fish was longer than small sized fish in higher concentration (P<0.05). Using the established optimum aesthetic concentration, we evaluated the physiological response of dark-banded rockfish to clove oil by measuring plasma cortisol and glucose levels. Following administration of $150\;mgL^{-1}$ clove oil at $20^{\circ}C$ (optimum breeding temperature), plasma cortisol level was highest ($42.2{\pm}11.318{\mu}g/dL$) after 0 hour, while plasma glucose level was highest ($52.5{\pm}10.61\;mg/dL$) after 1 hour. Plasma cortisol and glucose concentrations required 6 and 2 hours, respectively, to return to pre-exposure levels.

• KIEAE Journal
• /
• 제12권6호
• /
• pp.107-112
• /
• 2012

The purpose of this study is to determine the optimum slat angle of the venetian blind which was applied at an outer skin of a curtain-wall system. The evaluation of the blind slat angle was performed in terms of the comfortable visual environment and decreased energy consumption. The office building prototype was considered for the analysis and simulation variables include application of blind, blind slat angle and dimming control of lighting. The annual energy consumption and incidence rate of discomfort glare were analyzed using EnergyPlus which is developed by the U. S. Department of Energy for the detailed building energy simulation. As a result, it turns out that when the blind (reflectance: 0.5) was installed, the annual energy consumption was greater than that of the base model. However, when the dimming control was applied, the maximum energy saving of 16.3% could be achieved at a slat angle of $0^{\circ}$. In addition, in case of the base model, the incidence rate of discomfort glare was 84%, while the case of the blind with the slat angle of $0^{\circ}$ showed that the incidence rate of discomfort glare was 42.4%. Consequently, the results showed that the slat angle of $55^{\circ}$ with dimming control was the optimum strategy for the comfortable visual environment and decreased energy consumption.

• 한국농공학회논문집
• /
• 제52권5호
• /
• pp.87-95
• /
• 2010

The optimum volume of sediment settling pond is determined by the maximum rainfall and surface peak rate runoff from crop field. Based on analysis of measured rainfall and runoff data, it was found that rainfall intensity of 2 mm/min would result in peak rate runoff from the agricultural field of study area. Optimum pond volume under various slope scenarios were determined using the WEPP model calibrated with measured flow and sediment data for the study watershed. For the agricultural field with the slope of 7 % and area of $2,600\;m^2$ at the study area, at least $6.4\;m^3$ of sediment settling pond is needed as shown in this study. The results presented in this study could be used as a guide in designing appropriate volume of sediment settling pond at highland agricultural areas because both very detailed field measurement and calibrated WEPP model results are used in the analysis.

• 생물환경조절학회지
• /
• 제5권1호
• /
• pp.57-64
• /
• 1996

To use effectively the solar energy in greenhouse heating, a high performance solar collector should be developed. And then the size of the solar collector and thermal storage tank should be determined through the calculation of heating load. The solar collector must be set in the optimum tilt angle and direction to take daily solar radiation maximally, and the flow rate of heat transfer fluid through the solar collector should be kept in the optimum range. In this research, the performance tests of a capillary tube solar collector were performed to determine the optimum water flow rate and the results summarized as follows. 1. The regressive equations for efficiency estimations of the capillary tube solar collector in the open loop were modeled in the water flow rate of 700-l,000 $\ell$/hr. 2. The optimum water flow rate of the solar collector was estimated by the second order polynomial regression and the maximum efficiency was 80% at the water flow rate of 850 $\ell$/hr. 3. The solar thermal storage system consisted of a capillary tube solar collector and a water storage tank was tested at the water flow rate of 850 $\ell$/hr in the closed loop, and obtained the solar thermal storage efficiency of 55.2%. 4. As the capillary tube solar collector engaged in this experiment was made of non-corrosive polyolefin tubes, its weight was as light as 1/30 of the flat plate solar collector made of copper tubes. Therefore it was considered to be suitable for the greenhouse heating system.