• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.4
• /
• pp.79-93
• /
• 1984

The dissolved air flotation(DAF) has been shown to be efficient process for the removal of algae ftom water. The efficiency of DAF can be affected by the volume ratio of pressurized liquid to sample, the pressure pressurized liquid, the contact time, the appropriate coagulant and its amount, the water temperature, the turbulence of reactor, the bubble size and rising velocity etc. The purpose of this paper is to compare the practical bubble rising velocity with the theoretical one, to investigate the adhesion phenomenon of bubbles and floc, and the influence of bubble size and velocity upon the process. The results through theoretical review and experimental investigation are as follows: Ives' equation is more suitable than Stokes' equation in computation of the bubble rising velocity. The collection of bubble and algae floc is convective collection type and resulted from absorption than adhesion or collision. The treatment efficiency is excellent when the bubble sizes are smaller than $l00{\mu}m$, and the turbulence of reactor is small. In the optimum condition of continuous type DAF the volume ratio of pressurized liquid to sample is 15%, the contact time in reactor is 15 minutes, the pressure of pressurized liquid is $4kg/cm^2$ and the distance from jet needle to inlet is 30cm.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.247-253
• /
• 2006

This study was conducted to investigate the effects of dietary supplementation of ${\beta}-1,3$ glucan on growth and immune responses in juvenile olive flounder, Paralichthys olivaceus fed the white fish meal based diets for 6 weeks. Five experimental diets supplemented with ${\beta}-1,3$ glucan at 0, 0.01, 0.025, 0.05, 0.1 % (Control, $G_{0.01},\;G_{0.025},\;G_{0.05}\;and\;G_{0.1}$, respectively) of diet on a dry-matter basis. Five experimental diets were formulated to be isonitrogenous and isocaloric to contain 50.0% crude protein and 16.7 kJ available energy $g^{-1}$. Fish averaging $3.2{\pm}0.1\;g\;(mean{\pm}SD)$ were randomly distributed in each aquarium as triplicate groups of 15 fish. Weight gain (WG, %), specific growth rate (SGR, %), and feed efficiency (FE, %) of fish fed $G_{0.1}$ diet were found significantly higher than those of fish fed Control, $G_{0.01},\;G_{0.025}\;and\;G_{0.05}$ diets (P<0.05). However, there was no significant difference among the fish fed control, $G_{0.01},\;G_{0.025}$. Chemiluminescent responses (CL) of fish fed $G_{0.1}$ diet were significantly higher than those of fish fed the other diets. Serum lysozyme activities of fish fed $G_{0.05}$ and $G_{0.1}$ diets were higher than those of fish fed control, $G_{0.025}$ and $G_{0.05}$ diets. Fish fed $G_{0.1}$ diet showed a significantly lower cumulative mortality than did fish fed control diet throughout the challenge test (P<0.05). These results suggested that based on growth rate, feed efficiency, non-specific immunity and protection against microbial infections the optimum dietary ${\beta}-1,3$ gulcan could be greater than 0.05% but less than 1.0% in juvenile olive flounder, Paralichthys oilvaceus.

• Korean Journal of Organic Agriculture
• /
• v.18 no.3
• /
• pp.401-418
• /
• 2010

This experiment was selected a $\beta$-glucan producing mushroom strain and developed industrial media, and used to $\beta$-glucan as an alternative for antibiotics in weaned pigs. Yields of mycelial biomass and extracellular $\beta$-glucan from Youngji (Ganoderma lucidum) mushroom was 8.52g/L and 4.49g/L respectively. Also, we prepared optimum formula for mushroom cultivations. A total of 144 pigs ($8.6{\pm}0.9$ kg average body weight, weaned $20{\pm}3$ days of age) were allotted to 4 different treatment groups and replicated 4 times with 8 pigs per replicate in randomized complete block design. Treatments were T1) NC (negative control, basal diet), T2) PC (positive control, basal diet+0.255% antibiotics), T3) NC+0.2% $\beta$-glucan and T4) PC+0.2% $\beta$-glucan. The T2 and T4 treatments were significantly higher in feed efficiency by antibiotics group (p<0.05), however, there was no significant differences in terms of average daily gain (ADG) and average daily feed intake (ADFI) during phase I (0~14 days). In phase II (15~28 days), Pigs fed with antibiotics and $\beta$-glucan (T4) had greater ADG than other treatments (p<0.05), while no differences were observed in ADFI and feed efficiency. During the whole experiment period, the ADG of T4 treatment was higher than other treatments. Pigs fed with $\beta$-glucan (T3 and T4) had greater diarrhea score and moisture content than other treatments (p<0.05). Pigs fed with $\beta$-glucan (T3 and T4) had greater moisture content than other treatments (p<0.05). However, there was no significant differences in diarrhea score and mortality of weaned pigs. There was marginal reductions in feed cost measured feed cost per weight gain used in antibiotics and $\beta$-glucan added diet during phase I. In the second phase, the treatment supplemented with antibiotics had a significantly lower feed cost per weight gain compared to the other treatments. The results from these experiments suggests that $\beta$-glucan is likely able to improve the growth performance, and reduce feed cost although they do not have similar effects like antibiotics in weaning pigs.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.2
• /
• pp.35-53
• /
• 1974

A series of experiment was conducted to investigate the effects of the level of dietary Protein (soybean meal) and carbohydrate (sucrose) on the growth rate, feed efficiency, nutrients digestibility and amylase activity of larvae at 5th instar. The results obtained from the experimentation are summarized as follow： (1) It was found that the body weight gain, cocoon quality and feed efficiency of the 5th instar larvae were significantly affected by the level of protein and carbohydrate in the artificial diet. Present data revealed that the proper level of dietary protein and carbohydrate would be the most important factor for the optimum growth of larvae. (2) In the amount of diet consumption, the group of larvae gained more body weight consumed more diet than the group gained less amount of body weight. (3) Digestibility of nutrients was improved as the level of protein in the diet increased, although the level of dietary carbohydrate did not exert any positive results. (4) It was observed that the amylase activity in digestive juice was stimulated by the increasement of dietary carbohydrate. However, no correlation between the level of dietary protein and carbohydrate was detected in the amylase activity. (5) Analytical data indicated that the amount of protein or carbohydrate excreted through feces and urine was proportional to the content of protein or carbohydrate in artificial diet. The group o( larvae consumed the diet contained high protein excreted more protein and less nitrogen free extract than did the group received low protein diet. Likewise, the group of larvae fed high dietary carbohydrate excreted more nitrogen free extract and less protein through excreta than the group consumed low carbohydrate diet group. (6) Although the amylase activity of the larvae received the artificial diet was higher than the larvae received natural diet (mulberry leaf), the rate of body weight gam and the quality of cocoon produced from the natural diet group was better than the artificial diet group. It is, thus, concluded that feeding the larvae by the artificial diet may net be recommendable. (7) It was determined that the best level of protein (soybean meal) and carbohydrate (sucrose) in artificial diet was found to be 40g and 0g, respectively when it was fed to the 5th instar larvae. (8) It may be concluded from the results obtained that the artificial diet that could stimulate the activity of amylase nay not be recommendable for the practical larvae feeding Purpose due simply to the Poor economic return from this diet than natural diet.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.151-159
• /
• 2006

In these days, the importance of sludge treatment is emerging due to the London Convention, so this study was conducted to propose the alternatives for the improved sludge treatment on the organic wastewater and sewage sludge with JAR test and settling column equipped with stirrer. The minimum coagulant dosage to earn the optimum sludge settling efficiency resulted from 200mg/l and each critical sludge settling interface showed no distinct difference when PAC was dosed over 200mg/l. Accordingly, Clarification Rate(CR) with 200mg/l dosage was calculated to CR=(Ho-Ht) / Ho=1-0.4=0.6 because the critical sludge settling height stopped at 0.4. The settling velocity of sludge interface was decreased with the increase of MLSS concentration but rather increased with MLSS concentration over 1,000mg/l. This resulted from positive effect of interacted coagulation for floc formation by transfer to the zone of compressed settling when MLSS concentration increased over 1,000mg/l. The settling velocity of sludge interface showed $28.66{\times}10^{-3}/min$ for average settling velocity of sewage sludge which is 6.7 times higher than $4.25{\times}10^{-3}/min$ for average settling velocity of organic wastewater sludge. The increasing rate of CR for organic wastewater activated sludge was higher than that of settling velocity under 200mg/l of PAC dosage but settling velocity was higher than CR over 200mg/l of PAC dosage. However, in case of sewage sludge, the differential rate of CR was low when PAC dosage was increased but the settling velocity was suddenly increased with over 200mg/l dosage. Therefore coagulation effect was more efficient to MLSS settling velocity rather than SS removal effect in the supernatant.

• Journal of Bio-Environment Control
• /
• v.18 no.1
• /
• pp.15-22
• /
• 2009

Adequate environment conditions with growth stage of potato were decided in a photoautotrophic micropropagation system using models. Total 20 day-period of growth were divided into three growth periods such as 6 (stage 1), 7(stage 2), and 7(stage 3) days. At the 1st stage, no significant differences were observed in the growth of potato plantlets at various photosynthetic photon flux density (PPFD) and $CO_2$ conditions. Considering damaged leaves, $80\;mmol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and ambient $CO_2$ level were adequate in this stage. At the 2nd stage, significant differences were partly observed in several growth characteristics including dry weight. Based on the dry matter model, over $240\;mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD was too high to cultivate potato plantlets at this stage due to the occurrence of damaged leaves. Considering both plant growth and energy efficiency, $160\;mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and $700\;mol{\cdot}mol^{-1}\;CO_2$ were selected for the adequate combination. At the 3rd stage, the biomass accumulation was significantly induced in potato plantlets under higher levels of PPFD and $CO_2$ concentration as suggested by increased fresh and dry weights. However, we could not find the saturated point with regard to dry matter due to continuous increase of dry mater even under maximum PPFD ($320\;mmol{\cdot}m^{-2}{\cdot}s^{-1})$. Thus, $320\;mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD and $1800\;mol{\cdot}mol^{-1}\;CO_2$ were considered as the best choice at final stage in this study. In conclusion, even though the growth period of micropropagated potato plantlets was quite a short, favorable environmental conditions required at each growth stage were different. This technique could improve the growth of micropropagated plantlets compared to the conventional micropropagation and apply to other agriculturally important crops as well as potato in the future.

• Journal of Korean Society of Forest Science
• /
• v.97 no.1
• /
• pp.61-70
• /
• 2008

This study was conducted to develop a mobile tower-yarder with tractor for agriculture and forestry that is the efficient yarder in steep terrains, thinning operation and small scale logging operation. It was designed and manufactured that the power source of tower-yarder is equiped three hydraulic pump connected to PTO of tractor, and three hydraulic pump is used to operate the four motor for drum, the cylinder for clutch of interlocker, the cylinder for tower expanding and the out-rigger cylinder. It was to adopt the running skyline system and the inter-lock function, and to equip the double capstan drum, the storage drum and the clutch for interlock in the development of tower-yarder. It was to develop the tower-yarder which the winch torque of double-capstan drum, the traction force of double-capstan drum, the number of rotation of double-capstan drum and the line speed is $191kg{\cdot}m$, 1,910 kgf, 220.5 rpm and 138.5 m/min, respectively. And it was known that the optimum flange diameter of the main and haulback storage drum is about 360 mm and about 460 mm in order to storage the main line length of 250m and the haulback line length of 450 m. The carriage was made to adopt the running skyline system and to equip the lock function in order to the convenience of chocking and the fall down preventing of tree. It was provided to develop the wire remote controller for the inter-lock function, the convenience of control and the efficiency of yarding. In development process, this tower-yarder was attached the 3-point linkage hitch equipment and the tire wheel for the traction and moving of tower-yarder. Also, it was equipped that the out-rigger and the guy line in order to raise the safety and efficiency of yarding of tower-yarder.

• Horticultural Science & Technology
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2017

We investigated growth, clove development, and photosystem II activity in garlic (Allium sativum L.) grown under different day/night temperature regimes using Soil-Plant-Atmosphere - Research (SPAR) chambers to determine the optimum cultivation temperature and to assess the impact of temperature stress on garlic. In the early stages of growth, plant growth increased markedly with temperature. At harvest time, however, the pseudostem diameter decreased significantly under a relatively low day/night temperature range ($14/10-17/12^{\circ}C$), suggesting that these temperature conditions favor regular bulb growth. At harvest time, the bulb diameter and height were great at $14/10-23/18^{\circ}C$, whereas the bulb fresh weight and number of cloves per bulb were greatest at $17/12-20/15^{\circ}C$. However, the number of regularly developed cloves per bulb was highest at the relatively low temperature range of $14/10-17/12^{\circ}C$, as were the clove length and fresh weight. The photochemical efficiency ($F_v/F_m$) and potential photochemical efficiency ($F_v/F_o$) of photosystem II in the leaves of garlic plants were higher at $14/10-20/15^{\circ}C$ and lower at temperatures below $14/10^{\circ}C$ or above $20/15^{\circ}C$, implying that the $14/10-20/15^{\circ}C$ temperature range is favorable, whereas temperatures outside this range are stressful for garlic growth. Furthermore, at temperatures above $20/15^{\circ}C$, secondary growth of garlic, defined as lateral bud differentiation into secondary plants, continuous growth of the cloves of the primary plants, or the growth of bulbil buds into secondary plants, was enhanced. Therefore, to achieve commercial production of fresh scapes and bulbs of garlic, it may be better to grow garlic at relatively low temperature ranges of $14/10-17/12^{\circ}C$.

• Journal of Biosystems Engineering
• /
• v.4 no.1
• /
• pp.1-23
• /
• 1979

The use of barley seeder attached to rotary tiller in the rural area has a significant meaning not only for the solution of labor peak season, but also for the increase of land utilization efficiency. The facts that presently being used barley seeders are all based on the mechanical principles of the reverse rotation, center drive and are all using forward rotating tine, which is used to be easily and heavily worn out when it rotates reversely, raise problem of recommending them to rural area in Korea. Therefore, the main objective of the study was to develop new type of rotary tine attachable to barley seeders. To attain the objective the following approaches were applied. (1) The kinematic analysis of reverse rotating barley seeders. (2) The studies on the soil bin and artificial soil. (3) The comparative experiment on the power requirement of prototype tine. The results obtained from the studies are summarized as follow: 1. The kinematic analysis of barley seeder attached to rotary tiller: The following results were obtained from the kinematic analysis for deriving general formulae of the motion and velocity characterizing the rotary tine of barley seeders presently being used by farmers. a) The position vector (P) of edge point (P) in the rotary tine of reverse rotating, center drive was obtained by the following formula. $$P=(vt+Rcos wt)i+Rsin wt j+ \{ Rcos \theta r sin \alpha cos (wt- \beta +\theta r) +Rsin \theta r sin \alpha sin (wt-\beta + \theta r) \} lk $$ b) The velocity of edge point $(P^')$ of reverse rotating, center drive rotary tine was obtained by the following formula. $$(P^')=(V-wR sin wt)i+(w\cdot Rcoswt)j + \{ -w\cdot Rcos \theta r\cdot sin \alpha \cdot sin (wt-\beta +\theta r) + w\cdot Rsin \theta r\cdot sin \alpha \cdot cos (wt- \beta + \theta r \} k $$ c) In order to reduce the power requirement of rotary tine, the angle between holder and edge point was desired to be reduced. d) In order to reduce the power requirement, the edge point of rotary tine should be moved from the angle at the begining of cutting to center line of machine, and the additional cutting width should be also reduced. 2. The studies on the soil bin and artificial soil: In order to measure the power requirement of various cutting tines under the same physical condition of soil, the indoor experiments Viere conducted by filling soil bin with artificially made soil similar to the common paddy soil and the results were as follows: a) When the rolling frequencies$(x)$ of the artificial soil were increased, the densIty$(Y)$ was also increased as follows: $$y=1.073200 +0.070780x - 0.002263x^2 (g/cm^3)$$ b) The absolute hardness $(Y)$ of soil had following relationship with the rolling frequencies$(x)$ and were increased as the rolling frequencies were increased. $$Y=37.74 - \frac {0.64 + 0.17x-0. 0054x^2} {(3.36-0.17x + 0.0054x^2)^3} (kg/cm^3)$$ c) The density of soil had significant effect on the cohesion and angle of internal friction of soil. For instance, the soil with density of 1.6 to 1.75 had equivalent density of sandy loam soil with 29.5% of natural soil moisture content. d) The coefficient of kinetiic friction of iron plate on artificial soil was 0.31 to 0.41 and was comparable with that of the natural soil. e) When the pulling speed of soil bin was the 2nd forward speed of power tiller, the rpm of driving shaft of rotary was similar to that of power tiller, soil bin apparatus is indicating the good indoor tester. 3. The comparative experiment on the power requirement of prototype tine of reverse rotating rotary: According to the preliminary test of rotary tine developed with various degrees of angle between holder and edge pcint due to the kinematic analysis, comparative test between prototype rotary tine with $30 ^\circ $ and $10 ^\circ$ of it and presently being used rotary tine was carried out 2nd the results were as follows: a) The total cutting torque was low when the angle between holder and edge point was reduced. b) $\theta r$ (angle between holder and edge point) of rotary tine seemed to be one: of the factors maximizing the increase of torque. c) As the angle between holder and edge point ($\theta r$) of rotary tine was $30 ^\circ $ rather than $45 ^\circ $, the angle of rotation during cutting soil was reduced and the total cutting torque was accordingly reduced about 10%, and the reduction efficiency of total cutting torque was low when the angle between holder and edge point ($\theta r$) of rotary tine was $10 ^\circ $, which indicates that the proper angle between holder and edge point of rotary tine should be larger than $10 ^\circ $ and smaller than $30 ^\circ $ . From above results, it could be concluded that the use of the prototype rotary tine which reduced the angle between holder and edge point to $30 ^\circ $, insted of $45 ^\circ $, is disirable not only decreasing the power requirements, but also increasing the durabie hour of it. Also forward researches are needed, WIlich determine the optimum tilted angle of rotary brocket, and rearrangement of the rotary tine on the rotary boss.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2015

As information technology fusion is accelerated, the researches to improve the quality and productivity of crops inside a plant factory actively progress. Advanced growth environment management technology that can provide thermal environment and air flow suited to the growth of crops and considering the characteristics inside a facility is necessary to maximize productivity inside a plant factory. Currently running plant factories are designed to rely on experience or personal judgment; hence, design and operation technology specific to plant factories are not established, inherently producing problems such as uneven crop production due to the deviation of temperature and air flow and additional increases in energy consumption after prolonged cultivation. The optimization process has to be set up in advance for the arrangement of air flow devices and operation technology using computational fluid dynamics (CFD) during the design stage of a facility for plant factories to resolve the problems. In this study, the optimum arrangement and air flow of air circulation fans were investigated to save energy while minimizing temperature deviation at each point inside a plant factory using CFD. The condition for simulation was categorized into a total of 12 types according to installation location, quantity, and air flow changes in air circulation fans. Also, the variables of boundary conditions for simulation were set in the same level. The analysis results for each case showed that an average temperature of 296.33K matching with a set temperature and average air flow velocity of 0.51m/s suiting plant growth were well-maintained under Case 4 condition wherein two sets of air circulation fans were installed at the upper part of plant cultivation beds. Further, control of air circulation fan set under Case D yielded the most excellent results from Case D-3 conditions wherein air velocity at the outlet was adjusted to 2.9m/s.