• Microbiology and Biotechnology Letters
• /
• v.33 no.3
• /
• pp.200-206
• /
• 2005

A bacterium with high productivity of poly-$\gamma$-glutamic acid (PGA) was isolated from the traditional Korean seasoning, ChungKookJang. The 16s ribosomal RNA sequence of isolated strain showed 97.6, 98.9 and $90.3{\%}$ of similarity to those of Bacillus sp. WL-3, Bacillus subtilis; ENV1 and B amy-loliquefaciens (T), respectively. Accordingly, this bacterium was identified as a Bacillus sp. However, some biochemical characteristics of this strain were different from those of B. subtilis: D-xylose fermentation and glycogen utility were negative. Maximum production of PGA was achieved when it was grown aerobically in a culture medium containing glutamic acid ($3{\%}$) and fructose ($4{\%}$) as carbon sources. The volumetric yield of PGA reached up to 27 g/l in the optimum culture medium. These results suggest that the present strain can be applicable for industrial purposes such as a prototype strain for food or cosmetics industry.

• Journal of Food Hygiene and Safety
• /
• v.31 no.4
• /
• pp.278-285
• /
• 2016

This study used response surface methodology (RSM) in an effort to optimize the ultrasoundassisted extraction condition of Camellia sinensis L. and Artemisia argyi mixture in order to increase extraction yield in the extract. The effects of three independent variables, $X_1$ (Mixture ratio, 60-80%), $X_2$ (Ratio of water to raw material, 20~100 mL/g), and $X_3$ (Extraction time, 25-145 min), were investigated at three levels using Box-Behnken design (BBD) to obtain the highest extraction efficiency. Y (Extraction yield) was chosen as dependent variable. Our result showed that the coefficient of determination ($R^2$) of the model was 0.9747, with significant at the level of p < 0.002. Furthermore, the predicted values of each variable were similar to the actual values. The optimum extraction conditions were as follows: mixture ratio of 85.86%, ratio of water to raw material of 92.73 mL/g, and extraction time of 56.52 min. At these conditions, predicted extraction yield was 30.03%. The analysis of variance (ANOVA) indicated a high goodness of model fit and the success of the RSM method for optimizing extraction conditions of Camellia sinensis L. and Artemisia argyi mixture.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1729-1737
• /
• 2010

This study was conducted to establish the optimal medium condition for the animal probiotic Lactobacillus plantarum by using onion juice. Cell yield and antioxidant activity increased in proportion to high additive levels of onion juice in medium. Onion juice, sucrose and yeast extract were selected as media ingredient factors and the effects of their mixed ratio in medium were evaluated. The full factorial design consisted of 24 experimental runs and was employed to estimate the main effects of the factors and their interactions. Significant positive effects on cell yield and antioxidant activity was shown with yeast extract and onion juice, respectively. Significant interaction was found only between sucrose and yeast extract in antioxidant activity. Finally, we selected an optimal medium that was composed of (g/l) onion juice, 600; sucrose, 15; yeast extract, 5. The efficiency of this optimum medium was estimated by using a 5 l jar fermenter. As a result, the maximum cell yield was $9.7\;{\log}_{10}$ (CFU/ml) at 12 hr. Cell yield at the end of incubation (20 hr) was $8.9\;{\log}_{10}$ (CFU/ml) and it was very similar with the predicted value, $9.0\;{\log}_{10}$ (CFU/ml). Antioxidant activity of culture was maintained at about 60~65% during all incubation time, resulting in a higher-than-predicted activity of 47.1%.

• Korean Journal of Food Science and Technology
• /
• v.7 no.1
• /
• pp.30-36
• /
• 1975

The extraction efficiency of orange-yellow pigment from the Gardenia was greatly depended upon the extraction time, extraction temperature, volume of solvent used and fat contents of the Gardenia. From the experimental results, the amounts of extracted pigment (P) was proportional to the $log\;t^{\;1{\cdot}15}$ of extraction time$(t;\;0{\sim}60\;min.)$, the $log\;T^{3{\cdot}73}$ of extraction temperature$(T;\;5{\sim}60^{\circ}C)$, the $log\;S^{3{\cdot}7}$ of volume of solvent$(S;\;5{\sim}50\;ml)$, and the -4X of fat contexts of sample $(X;\;0{\sim}0.\;15)$ at $18^{\circ}C$ for 10 minutes. Finally, the modified empirical equation was derived as follow; $P{\simeq}1.15\;log\;t+3.73\;log\;T+3.7\;log\;S-4X-6.4$ In addition to that, the most optimum conditions of pigment extraction were determined as 30 minutes of operation time, $40^{\circ}C$ of temperature. Deffated Gardenia was more productive than natural Gardenia in the pigment extraction.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.659-667
• /
• 1990

Starch acetates were prepared by conventional method, preheat treatment, and extrusion process through acetylation of corn starch with acetic anhydride and their physicochemical properties were investigated. The optimal conditions of the acetylation of starch by conventional method(CSA) was found that starch concentration was 30%, reaction temperature $35^{\circ}C$ and pH 8.5. With increasing the molar ratio of acetic anhydride to anhydrous glucose unit from 0.03 to 0.20, DS(Degree of substitution) value of corn starch acetate prepared at the optimum condition was increased from 0.019 to 0.080, while the acetylation efficiency was decreased from 31.6% to 20.5%. In the case of the preheated (gelatinized), then acetylated starch(PSA), DS value was increased from 0.027 to 0.04 at the fixed molar ratio of the acetic anhydride with increasing preheating temperature from $60^{\circ}C\;to\;90^{\circ}C$. The DS was low as 0.02 in the case of starch acetate prepared by extrusion process(WESA). The CSA and PSA showed lowering gelatinization temperature and enthalpy than raw corn starch with increasing DS. All of starch acetates showed the increased degree of transparency, the decreased lightness and the increased yellowness as compared to the raw corn starch. WESA showed lower apparent viscosity and more close to the characteristic of the Newtonian fluid than CSA and PSA. Intrinsic viscosity was reduced in CSA and WESA, although PSA has a slightly higher one than raw corn starch. The rate of retrogradation of the gels was retarded in all starch acetates.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.45-54
• /
• 2016

In this study, the construction method of new underground continuos impervious wall that the bentonite slurry keeps the stability of excavated trench and the mixture of cement and bentonite plays a role as a constituent of impervious wall in the trench. The merit of homogeneity of the method so called as a cement-bentonite slurry wall enables to accurately make an estimation of hydraulic conductivity of the walls compared with that by other general grouting methods and to verify their waterproof efficiency without difficulty at the design stage. The use of cement-bentonite slurry walls for the containment of groundwater flow has also proven a cost-effective impervious wall technology by employing the simple combination of construction equipments and easy and fast construction procedures. The engineering characteristics of cement-bentonite impervious wall obtained by carrying out the laboratory experiments under various conditions. This study reveals the effect of variation of constituent materials and their mixing methods (Water-Cement-Bentonite) on the engineering characteristics of a composition. Also, this study makes some recommendations on the optimum mixing ratio and mixing sequence for the best quality at the site. That is the most important factors to estimate the construction cost and design of the technique. The comparison is lastly made to evaluate the effect of ordinary Portland and blast furnace slag cement as a bonding material on the behavior of impervious walls.

• Korean Chemical Engineering Research
• /
• v.48 no.6
• /
• pp.704-711
• /
• 2010

Lignocellulose ($2^{nd}$ generation) is difficult to hydrolyze due to the presence of lignin and the technology developed for cellulose fermentation to ethanol is not yet economically viable. However, recent advances in the extremely new field of biotechnology for the ethanol production are making it possible to use of agriculture residuals and nonedible crops biomass, e.q., rice straw and miscanthus sinensis, because of their several superior aspects as agriculture residual and nonedible crops biomass; low lignin, high contents of carbohydrates. In this article, as the basic study of AP(Ammonia Percolation), the properties and the optium conditions of process were established, and then the overall efficiency of AP was investigated. The important independent variables for AP process were selected as ammonia concentration, reaction temperature, and reaction time. The percolation condition for maximizing the content of cellulose, the enzymatic digestibility, and the lignin removal was optimized using RSM(Response Surface Methodology). The determined optimum condition is ammonia concentration; 11.27%, reaction temperature; $157.75^{\circ}C$, and reaction time; 10.01 min. The satisfying results were obtained under this optimized condition, that is, the results are as follows: cellulose content(relative); 39.98%, lignin content(relative); 8.01%, and enzymatic digestibility; 85.89%.

• Journal of Korea Port Economic Association
• /
• v.32 no.4
• /
• pp.109-126
• /
• 2016

This study investigates the initiatives of Gangwon sea routes based on precedent studies on the North Pole route to suggest a multi-modal buildup of transport logistics network of Gangwon harbors for the strengthening of logistics efficiency in the Korean Peninsula. The findings were: First, the government should expand railway infrastructure in Gangwon. Second, harbors in Gangwon should each have one speciality to strengthen connection with other harbors by using railway oriented background transportation network. Third, the government should develop industries of EFEZ(East coast Free Economic Zone) in the East Sea Coast in Gangwon to connect resources from the North Pole Sea. Fourth, the government should invite the base of Araon Ho's polar research vessel to play the role of the North Pole Sea route in the near future. Fifth, the government should strengthen the role of the Samcheock LNG base under construction. SIxth, environment-friendly transportation technology should be introduced to reduce carbon emission as much as possible. Lastly, an optimum North Pole logistics route should be developed to connect the Metropolitan area(Metropolitan Economic Zone), Gangwon roads and railway, Gangwon habor, Trans-Siberian Railway and thw North Pole route, and Europe, to strengthen national foreign trade power in the near future.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.1
• /
• pp.143-157
• /
• 1992

For the design of structural systems having the prescribed or optimum dynamic characteristics, some design changes of the initially designed system are required. In these cases, if the sensitivity analysis which can predict the changes of dynamic characteristics due to the changes of design variables is applied, the design changes can be carried out rationally and very efficiently. For many structural systems, it is well known that the analysis by the transfer matrix method(TMM) and the combined finite element-transfer matrix method(FETMM) is more efficient than the analysis by the finite element method. However, most known studies on the sensitivity analysis of structural systems premise using the finite element method. In this paper, the sensitivity analysis methods by the TMM and the FETMM are presented and some numerical investigations on the beam-column with elastically restrained ends and intermediate contraints and the stiffened plate having subsystems are carried out. The results of the numerical examples show good accuracy and computational efficiency of the presented methods, and show that the application of sensitivity analysis in the dynamic characteristic reanalysis give good results within the practically changeable range of design variables.

• Clean Technology
• /
• v.26 no.2
• /
• pp.131-136
• /
• 2020

Biomass bamboo charcoal is utilized as anode for lithium-ion battery in an effort to find an alternative to conventional resources such as cokes and petroleum pitches. The amorphous phase of the bamboo charcoal is partially converted to graphite through a low temperature graphitization process with iron oxide nanoparticle catalyst impregnated into the bamboo charcoal. An optimum catalysis amount for the graphitization is determined based on the characterization results of TEM, Raman spectroscopy, and XRD. It is found that the graphitization occurs surrounding the surface of the catalysis, and large pores are formed after the removal of the catalysis. The formation of the large pores increases the pore volume and, as a result, reduces the surface area of the graphitized bamboo charcoal. The partial graphitization of the pristine bamboo charcoal improves the discharge capacity and coulombic efficiency compared to the pristine counterpart. However, the discharge capacity of the graphitized charcoal at elevated current density is decreased due to the reduced surface area. These results indicate that the size of the catalysis formed in in-situ graphitization is a critical parameter to determine the battery performance and thus should be tuned as small as one of the pristine charcoal to retain the surface area and eventually improve the discharge capacity at high current density.