• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.10
• /
• pp.1799-1808
• /
• 2000

To investigate the applicability of loess as a coagulant. the optimum conditions of coagulation and efficiency comparison of several coagulants (PAC, PACS, LAS) in chemical treatment of livestock wastewater were performed. As a result, the optimum mixing ratio of loess and lime(CaO) was 3:7. The optimum dosage of the mixed coagulant was 30 g/L. The optimum speed for rapid mixing of the mixed coagulant was 200 rpm at 1 min. and the optimum speed for slow mixing was 50 rpm at 10 min. The mixed coagulant showed the removal efficiency of turbidity, SS, BOD, $COD_{cr}$. T-P and TKN to 95.8%, 92.5%, 71.6%, 71.1%, 98.2% and 32.5%, respectively, which was better than other several coagulants. The mixed coagulant was possible to use as substitutional coagulants of traditional coagulant, and the producted sludge can use as a soil amendments.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.1
• /
• pp.21-34
• /
• 2008

An improved optimum design method for reinforced concrete frames using integrated genetic algorithm(GA) with direct search method is presented. First, various sets of initially assumed sections are generated using GA, and then, for each resultant design member force condition optimum solutions are selected by regression analysis and direct search within pre-determined design section database. In advance, global optimum solutions are selected from accumulated results through several generations. Proposed algorithm makes up for the weak point in standard genetic algorithm(GA), that is, low efficiency in convergence causing the deterioration of quality of final solutions and shows fast convergence together with improved results. Moreover, for the purpose of elevating economic efficiency, optimum design based on the nonlinear structural analysis is performed and therefore makes all members resist against given loading condition with the nearest resisting capacity. The investigation for the effectiveness of the introduced design procedure is conducted through correlation study for example structures.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.3
• /
• pp.165-169
• /
• 2008

It has been reported that most wastewater treatment plants have difficulties in nitrogen removal during winter season due to declined activity of nitrifiers in the condition of low temperature. This study was conducted in order to find out optimum operating condition for efficient nitrogen removal in low temperature. A series of operating conditions with various HRTs of each tank were simulated using the GPS-X program. The optimum HRT combination for effective nitrogen removal was 0.3 hr/0.5 hr/1.36 hr/4.84 hr(PreAx/An/Ax/Ox) with 51.4% of T-N removal efficiency and 57.3% of $NH_4^+$-N removal efficiency.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.52-52
• /
• 2018

Development of herbicide resistant transgenic legume plants through Agrobacterium-mediated transformation has been worked in many previous studied. Plant regeneration after infection is the important step to obtain successful transgenic plants. Many attempts try to find the optimum media condition for plant regeneration after infection. However, the transformation efficiency of legume plants is still low. In this study, regeneration of some Korean legume species including two soybean cultivars (Dawon and Pungsan) and pea have been done with organogenesis which is used various kind of explants such as cotyledonary-nodes in soybean and bud-containing tissue in pea. We developed the optimum media condition for plant regeneration regulators under Agrobacterium-mediated transformation using different kind and various concentration of plant growth. As the results, B5 medium containing 2 mg/L of 6-benzylaminopurine was selected in this study for the optimum plant regeneration media. The segments were inoculated with Agrobacterium suspension harbored an IG2 vector containing bar gene which confers resistance to phosphinotricin (PPT) in 3, 5 and 7 days. The transformation efficiency was achieved in Dawon 3.03 % and pea 1.46 % with co-cultivation period of 7 days which is showed a high number of GUS positive expression period.

• Journal of Forest and Environmental Science
• /
• v.22 no.1
• /
• pp.27-31
• /
• 2006

Sedimentation characteristics such as SS, COD removal efficiency of wastewater in the toilet paper mill using recycled paper were examined by zeta potential. Optimum dosage of coagulant were determined by turbidity, SS, COD and then equation for treatment efficiency was suggested. Mechanical strength of floc was determined by turbidity.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.568-578
• /
• 2016

A wireless power transfer (WPT) system is usually classified as being of either a two-coil or four-coil type. It is known that two-coil WPT systems are suitable for short-range transmissions, whereas four-coil WPT systems are suitable for mid-range transmissions. However, this paper reveals that the two aforementioned types of WPT system are alike in terms of their performance and characteristics, differing only when it comes to their matching-network configurations. In this paper, we first find the optimum load and source conditions using Z-parameters. Then, we estimate the maximum power transfer efficiency under the optimum load and source conditions, and we describe how to configure the matching networks pertaining to both types of WPT system for the given optimum load and source conditions. The two types of WPT system show the same performance with respect to the coupling coefficient and load impedance. Further, they also demonstrate an identical performance in the two cases considered in this paper, that is, a strong-coupled case and a weak-coupled case.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.327-334
• /
• 2003

Thermal Prestressing Method for continuous composite girder bridges is a new design and construction method developed to induce initial composite stresses in the concrete slab at negative bending regions. Due to the induced initial stresses, prevention of tensile cracks at concrete slab, reduction of steel girder section, and reduction of reinforcing bars are possible. Thus, economical and construction efficiency can be improved. Method for determining optimum heating region of Thermal Prestressing Method, has not been established although such method is essential for increasing efficiency of the designing process. Trial-and-error method used in previous studies is far from efficient and more rational method for computing optimal heating region is required. In this study, efficient method for determining optimum heating region in the use of Thermal Prestressing Method is developed based on artificial neural network algorithm, which is widely adopted to pattern recognition, optimization, diagnosis, and estimation problems in various fields. Back-propagation algorithm, which is commonly used as a learning algorithm in neural network problems, is used for training of the neural network. Through case studies of 2-span continuous and 3-span continuous composite girder bridges using the developed process, the optimal heating regions are obtained.

• Journal of Plant Biotechnology
• /
• v.30 no.3
• /
• pp.215-219
• /
• 2003

This study was conducted to find optimum bacterial density for improving the efficiency of transformation mediated by Agrobacterium tumefaciens in apples. Regeneration(15％) and transformation frequency(10％) were increased in resuspension-culture density $A_{600}$ 1.3 from preculture density $A_{600}$ 0.7 of Agrobacterium tumefaciens in ′Fuji′. In ′Gala′, 20% regeneration and 16% transformation frequency were observed at optimum bacterial density $A_{600}$ 0.7 form preculture density $A_{600}$ 1.3. ′Mclntosh as well as "Gala" were 25％regeneration and 10％ transformation frequency. Hence a frequency optimum condition of bacterial density for the efficient transformation of apple could be depend on apple genotypes.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.161-168
• /
• 2005

The absorbing material is mostly used to changing the acoustic energy to the heat energy in the passive control, and that consists of the porous media. That controls an air borne noise while the stiffened plates, damping material and additional mass control a structure borne noise. The additional mass can decrease the sound by mass effect and shift of natural frequency, and damping material can decrease the sound by damping effect. The passive acoustic control using these kinds of control materials has an advantage that is possible to control the acoustic in the wide frequency band and the whole space at a price as compared with the active control using the various electronic circuit and actuator. But the space efficiency decreased and the control ability isn't up to the active control. So it is necessary to maximize the control ability in the specific frequency to raise the capacity of passive control minimizing the diminution of space efficiency such an active control. Therefore, the characteristics of control materials and the optimum layout of control materials that attached to the boundary of structure-acoustic coupled cavity were studied using sequential optimization on this study.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2008.10b
• /
• pp.449-454
• /
• 2008

Finding an energy efficient route is one of the very important issues in the wireless sensor networks. The route scheme should consider both of the energy level of sensor nodes and the number of hops at the same time. First of all, this paper proposes an optimum routes finding scheme (ORFS), which could be used in the sensor network routing protocols. The scheme uses an optimum value for the path with the considerations of both the minimum energy level of a path and the number of hops at the same time. After that, this paper proposes a routing protocol based on the ORFS for how it could be used for the multipath directed diffusion with data aggregation (MDD-A), to get the better energy efficiency. The analysis result shows that the proposed routing protocol could lengthen the network life cycle about 18.7% compared to the previous MDD-A related protocols.