• 제목/요약/키워드: Optimum counting-time

검색결과 13건 처리시간 0.02초

Determination of Optimum Threshold for Accuracy of People-counting System Based on Motion Detection

  • Ryu, Hanseul;Song, Junho;Lee, Boram;Lee, Kiyoung
    • 한국환경보건학회지
    • /
    • 제41권5호
    • /
    • pp.299-304
    • /
    • 2015
  • Objectives: A people-counting system measures real-time occupancy through motion detection. Accurate people-counting can be used to calculate suitable ventilation demands. This study determined the optimum motion threshold for a people-counting system. Methods: In a closed room with two occupants moving constantly, different thresholds were tested for the accuracy of a people-counting system. The experiments were conducted at 150, 300, 450 and 600 lux. These levels of brightness included the illumination levels of most public indoor areas. The experiments were repeated with three types of clothing coloration. Results: Overall, a threshold of 16 provided the lowest mean error percentage for the people-counting system. Brightness and clothing color did not have a significant impact on the results. Conclusion: A people-counting system could be used with threshold of 16 for most indoor environments.

A counting-time optimization method for artificial neural network (ANN) based gamma-ray spectroscopy

  • Moonhyung Cho;Jisung Hwang;Sangho Lee;Kilyoung Ko;Wonku Kim;Gyuseong Cho
    • Nuclear Engineering and Technology
    • /
    • 제56권7호
    • /
    • pp.2690-2697
    • /
    • 2024
  • With advancements in machine learning technologies, artificial neural networks (ANNs) are being widely used to improve the performance of gamma-ray spectroscopy based on NaI(Tl) scintillation detectors. Typically, the performance of ANNs is evaluated using test datasets composed of actual spectra. However, the generation of such test datasets encompassing a wide range of actual spectra representing various scenarios often proves inefficient and time-consuming. Thus, instead of measuring actual spectra, we generated virtual spectra with diverse spectral features by sampling from categorical distribution functions derived from the base spectra of six radioactive isotopes: 54Mn, 57Co, 60Co, 134Cs, 137Cs, and 241Am. For practical applications, we determined the optimum counting time (OCT) as the point at which the change in the Kullback-Leibler divergence (ΔKLDV) values between the synthetic spectra used for training the ANN and the virtual spectra approaches zero. The accuracies of the actual spectra were significantly improved when measured up to their respective OCTs. The outcomes demonstrated that the proposed method can effectively determine the OCTs for gamma-ray spectroscopy based on ANNs without the need to measure actual spectra.

An Algorithm for Bit Error Rate Monitoring and Adaptive Decision Threshold Optimization Based on Pseudo-error Counting Scheme

  • Kim, Sung-Man
    • Journal of the Optical Society of Korea
    • /
    • 제14권1호
    • /
    • pp.22-27
    • /
    • 2010
  • Bit error rate (BER) monitoring is the ultimate goal of performance monitoring in all digital transmission systems as well as optical fiber transmission systems. To achieve this goal, optimization of the decision threshold must also be considered because BER is dependent on the level of decision threshold. In this paper, we analyze a pseudo-error counting scheme and propose an algorithm to achieve both BER monitoring and adaptive decision threshold optimization in optical fiber transmission systems. To verify the effectiveness of the proposed algorithm, we conduct computer simulations in both Gaussian and non-Gaussian distribution cases. According to the simulation results, BER and the optimum decision threshold can be estimated with the errors of < 20% and < 10 mV, respectively, within 0.1-s processing time in > 40-Gb/s transmission systems.

극저준위 액체섬광계수기와 파형분석법을 이용한 지하수 및 온천수중 $^{222}Rn$의 신속측정법 (A Rapid Method for the Measurement of $^{222}Rn$ in Groundwater and Hot Spring Water using Ultra Low-Level Liquid Scintillation Counter and Pulse Shape Analysis)

  • 김창규;김철수
    • Journal of Radiation Protection and Research
    • /
    • 제20권2호
    • /
    • pp.103-115
    • /
    • 1995
  • 계측이 간단하며 화학적 분리가 필요 없는 액체섬광계수법을 이용하여 일부 지하수 및 온천수중 $^{222}Rn$의 최적 분석조건을 검토하였다. $^{222}Rn$의 분석을 위한 최적 파형분석(PSA) 준위는 Optiphase HiSafe3 형광체 (Cocktail)에서 110, 그리고 톨루엔계열 형광체 (Toluene-based cocktail)에서는 90이었다. $^{222}Rn$의 계측효율은 Optiphase HiSafe3 형광체를 이용한 경우 ${\alpha}$영역에서의 계수효율은 유리용기는 282.2%, 테프론용기에서는 271.6%였으며, 톨루엔계열 형광체를 이용한 경우에는 유리용기와 테프론 용기에서 각각 262.3%, 247,5%였다. Optiphase HiSafe3 형광체와 테프론용기를 사용하여 60분간 계측하는 경우 ${\alpha}$-선 피크영역에서 $^{222}Rn$의 검출하한치는 $0.30Bq/{\iota}$였다. 또한, 본 연구에서 검토한 분석법은 일부 지하수 및 온천수중 $^{222}Rn$의 분석에도 응용되었다.

  • PDF

핵활동 감시를 위한 대기 입자 측정시스템의 최소검출 방사능 농도 결정 (Minimum Detectable Radioactivity Concentration of Atmospheric Particulate Measurement System for Nuclear Test Monitoring)

  • 김종수;윤석철;신장수;곽은호;최종서
    • Journal of Radiation Protection and Research
    • /
    • 제22권2호
    • /
    • pp.111-117
    • /
    • 1997
  • 최근 포괄적 핵실험금지조약 (Comprehensive Test Ban Traety : CTBT)의 체결은 전세계적으로 핵활동 감시 네트워크를 구축하는 것이다. 핵실험금지 위원회의 전문가들은 대기 방사성핵종의 측정을 핵실험 감시에 필수적인 요소로 제안하였으며, 이에 따른 기술적 요구사항을 제시하였다. 본 연구는 이를 근거로 핵활동으로부터 생성된 핵분열생성물을 검출하기 위하여 고성능 공기채집장치(High Volume Air Sampler: HVAS)와 여과지 압축기 그리고 고순도 게르마늄 반도체검출기(HPGe)로 대기 입자 방사성핵종 측정시스템을 구성하였다. 조속한 시일 내에 탐지와 최적의 측정 조건으로 본 시스템을 운영하기 위하여 CTBT 감시 전략에서 주요 핵종들에 대한 최소검출 방사능 농도(Minimum Detectable Concentration : MDC)를 decay time, counting time 그리고 sampler volumetric flow rate 등을 고려하여 결정하였다. 그 결과 각각 $10{\pm}$2h, $20{\pm}$2h, $850{\pm}50m^3$//h 정도로 선정하였다. 감마선 스펙트럼 분석에서 $^{212}Pb$ 방사능 농도의 변화는 Compton continuum의 baseline에 영향을 미치게 되므로 이에 기인한 MDC 관계식을 도출하였다. 이들 결과는 CTBT 감시 전략에 실제적인 도구로 사용될 수 있을 것으로 사료된다.

  • PDF

저준위 액체섬광계수기와 파형분석법을 이용한 수용액 중 라돈-222 및 라듐-226의 분석법 연구 (A Study of the Rn-222 and Ra-226 Analysis in Aqueous Samples with a Low-Level Liquid Scintillation Counter and Pulse-Shape Analysis)

  • 신현상;이창우;이명호;조영현;홍광희;최근식
    • 분석과학
    • /
    • 제12권5호
    • /
    • pp.428-435
    • /
    • 1999
  • 액체섬광계수기를 이용한 수용액시료 중의 미량의 Rn-222 및 Ra-226 농도 측정을 위한 분석방법을 확립하였다. 라돈 분석을 위해 자이렌계열 섬광용액(xylene-based cocktail) 12 mL를 사용하여 물 시료(10mL)내 라돈을 선택적으로 용매 추출하였다. 추출된 라돈을 측정용기 내에서 딸핵종과의 방사 평형을 위해 3시간동안 방치한 후 저준위 액체섬광계수기를 이용하여 계측하였다. Ra-226 분석을 위해서는 화학적 분리과정을 거친 후 자이렌 계열 섬광용액이 포함된 측정용기 내에서 일정 기간동안의 방사평형을 거쳐 생성된 Rn-222 및 알파선 딸핵종을 계측하였다. Rn-222 및 그의 알파선 딸핵종의 계측을 위한 최적 파형분석(PSA) 준위는 바탕시료에 대한 최대 효율값(Figure of Merit)을 조사하여 설정하였다. PSA 준위 100에서 폴리에틸렌 용기와 자이렌계열 섬광용액을 사용하여 준비된 시료를 200분 동안 계측하였을 때 얻어진 검출하한값(MDA)은 알파선의 총 피크영역에서 0.14 Bq/L(3.78 pCi)이었고, Po-214 만의 피크영역에서는 0.06 Bq/L(1.63 pCi)이었다. 섬광용액에 대한 시료의 부피비와 시료용기의 취급 및 시료용기를 통한 라돈기체의 손실등이 계측치에 미치는 영향을 고찰하였다.

  • PDF

오스템퍼링한 低合金 球狀黑鉛鑄鐵의 機械的 性質에 관한 硏究 (A study on the mechanical properties of austempered low-alloy ductile cast iron)

  • 강명순;박흥식
    • 대한기계학회논문집
    • /
    • 제12권6호
    • /
    • pp.1296-1302
    • /
    • 1988
  • The study has been carried out under various experimental conditions to investigate mechanical properties by the transformation conditions of austempered low-alloy ductile cast iron. The amount of retained austenite and bainite after quenching was determined by the X-ray diffractometer and the point counting method and which the microstructure was investigated by the S.E.M. The mechanical properties of austempered low-alloy ductile cast iron can be varried over a comparatively wide range by changing the transformation conditions. During isothermal transformation of austenite in the bainite region, low-alloy ductile cast iron austempered at holding time of 40 minute has the maximum volume fraction(24%) of retained austenite in the cast iron matrix and which optimum values of mechanical properties correspond to the maximum amount of retained austenite, which falls with decreasing transformation temperature. The low values of both tensile strength and elongation in the initial stage of bainite transformation can be explained by premature fracture of tensile specimens and the tensile strength, hardness and elongation do not change considerably after a certain period. With a decreasing transformation temperature the tensile strength increase while the elongation decrease, especially the elongation has the maximum value at temperature $370^{\circ}C$.

전자현미분석기를 이용한 저어콘 및 모나자이트의 화학적 연대 측정법 (Chemical Age Dating of Zircon and Monazite by E1ectron Microprobe)

  • 이석훈
    • 암석학회지
    • /
    • 제10권3호
    • /
    • pp.179-189
    • /
    • 2001
  • 전자현미분석 기를 이용한 저어콘 및 모나자이트의 화학적 연대측정은 미량의 U, Th 및 Pb의 정량분석을 통해 이루어지는데, 측정에 이용되는 M-line의 특성 X-선은 발생효율이 낮고 피크강도가 작아 측정하한과 오차범위가 고려된 분석조건이 설정 되어야한다. 총 분석시간을 줄이고, 측정조건의 변위에 따른 오차를 감소시키고자 PET결정을 갖춘 3개의 분광기를 이용하여 U, Th 및 Pb를 동시에 측정하였고, 파고분석기를 이용하여 피크/배경 비율을 증가시켜 측정하한을 낮추었다 최적 분석조건하에서 U, Th 및 Pb에 대한 이론적 값인 측정하한을 30 ppm (99%유의수준)까지 낮출 수 있었고. 저어콘의 단일측정 시 800 ppd의 Pb농도에서 $\pm$10% ($2{\sigma}$), 2330 ppm의 U에서 $\pm$5% ($2{\sigma}$) 그리고 측정된 연대에서 $\pm$10% ($2{\sigma}$)이내의 상대오차범위에서 분석결과를 얻었다. 저어콘 및 모나자이트의 연대측정을 수행하는데 있어, 3 $\mu\textrm{m}$ 이하의 공간분해능, 100 ppm ($3{\sigma}$) 이하의 측정하한과 $\pm$10% ($2{\sigma}$) 이하의 분석오차를 고려한 가속전압은 15~20 keV, 빔 전류는 100~200 nA, 그리고 총 측정시간을 300~l200초 (피크와 배경위치에서 각각 동일한 시간으로 측정)로 설정하여 보다 정밀하고 정확한 분석자료를 얻을 수 있었다. 높은 전류에 따른 시료의 손상을 줄이기 위해선 전자빔 직경을 3~5 $\mu\textrm{m}$로 증가시키거나 보다 짧은 시간동안의 측정을 반복하여 그 평균값을 이용하는 것이 필요하다. 빔 전류를 증가시키거나 분석시간을 늘려 측정하한을 낮추고 정밀도를 향상시킴으로서 보다 젊은 시기의 암석이나 상대적으로 U, Th 및 Pb의 함량이 적은 광물의 연대측정에 이용할 수 있다.

  • PDF

시판세제의 세정성과 Rolling-up의 상관성에 관한 연구 (A study on the Correlationship between Detergency of Commercial Detergents and Rolling-up)

  • 이경미;차옥선
    • 한국의류학회지
    • /
    • 제10권3호
    • /
    • pp.27-36
    • /
    • 1986
  • The purpose of this study was, to estimate the detergency of commercial detergent and to examine the interrelationship between detergency and detergent characteristics, detergent concentration, fiber characteristics, and Rolling-up phenomenon which is the major removal mechanism of oily soil. A mixture of oleic acid-olive oil was used as oily soil. The detergency was estimated by analysis of oleic acid on cotton ana polyester fabrics before and after washing by means of liquid scintillation counting. The Rolling-up of oily soil from PET film was observed and change of contact angle and removal time were measured. The results were as follows ; 1. In the case of soaps and powder synthetic detergents, the optimum concentrations we-re about $0.2\~0.3\%$. And detergencies of liquid synthetic detergents were considerably low, and the detergency was continually increased up with increasing concentration to $0.5\%$, which seemed to be caused by the lower pH than that of soap and powder synthetic deter-gent solutions. 2. As the effect of external or internal fiber structure; the detergency of cotton was lower than that of polyester. 3. In the observation of Rolling-up, the contact angle increased and the Rolling-up time became shorter with increasing detergent concentrations ($0.05\~0.5\%$). And it was confirmed that detergency was increased with Rolling-up effect. In addition, the study on the actual laundry condition was studied using the questionaire. From the results, about $76\%$ of households used the concentration of detergent roughly or excessively and housewives were highly concerned on the recommended dose, but grade of practice were very low.

  • PDF

다항식 회귀분석을 이용한 마이크로 버블의 종말상승속도 모델식 구축 및 운전조건 최적화 (Model setup and optimization of the terminal rise velocity of microbubbles using polynomial regression analysis)

  • 박일건;김흥래;조일형
    • 한국응용과학기술학회지
    • /
    • 제35권4호
    • /
    • pp.1393-1406
    • /
    • 2018
  • 본 연구는 3개의 운전변수(압력, 공기량, 운전시간)를 실험 설계하고 마이크로 버블의 종말부상속도(Terminal rise velocity)를 반응 값으로 하여 예측식 모델과 최적 조건을 수립하였다. 다항식 회귀분석을 통해 펌프의 압력($X_1$) 4.5bar, 공기량($X_2$) 3.3L/min 그리고 운전시간($X_3$)이 2.2min에서 종말상승속도(Terminal rise velocity)에 대한 최적값인 5.14 cm/min ($85.7{\mu}m/sec$)을 얻었다. 또한, 레이저 입자계수 측정장치를 이용하여 $2{\sim}5{\mu}m$$25{\sim}50{\mu}m$ 영역에서의 가장 높은 마이크로버블 직경크기 분포를 확인하였다.