• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.3
• /
• pp.513-518
• /
• 1996

In order to investigate the characteristics of alcohol fermentation by Saccharomyces cerevisiae, compositions and free sugar content of dried riped pumpkin powder were determined. The proximate compositions of ripe pumpkin powder were as follows: moisture 11.98%, total sugar 62.18%(dried weight basis 70.64%), protein 13.38%, lipid 0.85%, fiber 7.07% and ash 4.54%. The compositions of free sugar in well ripe pumpkin were: glucese 85.36mg/g, fructose 40.68mg/g, sucrose 68.25mg/g, lactose 18.60mg/g and maltose 3.82mg/g. The optimum conditions for alcohol fermentation by S. cerevisiae were as follows; incubation temperature of 3$0^{\circ}C$, initial pH of 6.0, ripe pumpkin powder concentration of 10% and cells inoculation of 1.3$\times$$10^{6}$ cells/ml liquid medium. Ethanol production under the optimum conditions was 5.95g/100g in liquid medium containing 10% ripe pumpkin powder after 4 days incubation.

• Food Science and Preservation
• /
• v.9 no.4
• /
• pp.396-399
• /
• 2002

An attempt was made in this study to investigate the optimum extracting time from meat with bone of goat and the nutritional component of its extract. for the trials, the mixtures of meat with bone and water were adjusted to the ratios of five to four by weight and extracted for 6, 9 and 12 hours at 120$\^{C}$ under autoclave. Judging from the content of mineral and amino acid, nonenzymatic browning and yield, the optimum extracting time was 9 hours. The major components of mineral were composed of 47.7mg％ potassium, 12.7mg% calcium, 150.0mg% sodium, 105.3mg% phosphorus and 0.5mg% iron, and of amino acids composed of 1,308.0mg% glutamic acid, 1,464.2mg% glycine, 750.2mg% alanine and 828.lmg% proline in extract. The yield of extract was 32.1 percentage by dry basis.

• Plant Resources
• /
• v.7 no.3
• /
• pp.181-186
• /
• 2004

To find out the optimum fertilizer level for high yielding variety, Paldanghomil, experiment was conducted with 15 compositions of fertilizer levels at the experiment field of forage rye in Sunchon National University from Sep. 1998 to Aug. 1999. The effects of nitrogen fertilizer on plant growth were large significant but increasing rate of application in potassium and phosphate fertilizers above 10kg/10a had negligible effects on plant growth. Raising nitrogen application rate of fertilizers turned out to be 18-10-10kg/l0a of N-P$_2$O$_{5}$-K$_2$O. Content of crude protein was the highest and that of crude fiber such as NDF, ADF, cellulose and lignin were lowest at this rate. Furthermore, IVDMD was high and dry matter yield were the highest at the optimum rate.e.

• 한국기계연구소 소보
• /
• s.20
• /
• pp.71-78
• /
• 1990

This investigation was undertaken to establish the technologies of grain refinement and modification, and to characterize material properties, essential for high quality aluminum alloy castings. Grain refinement seldom changed DAS and eutectic Si size, but largely decrease grain size. The variations of grain size induced by grain refinement had a great influence on the elongation without changes in the tensile strength or yield strength. The optimum Ti level lies between 0.1% and 0.16% to achieve the best possible mechanical properties. DAS and grain size were little affected, but eutectic Si size was greatly refined by modification. The variation of eutectic Si size had a great effect on the elongation, impact value, fracture toughness and fatigue crack propagation rate without changes in the tensile strength or yield strength. The Sr content of 0.015% is optimum to modification.

• Journal of information and communication convergence engineering
• /
• v.2 no.2
• /
• pp.106-109
• /
• 2004

This study designs a load balancer via direct routing that share a virtual service on a single IP address in the Linux system and suggests an efficient load balancing method to improve transmission speed in the web server cluster environment. It will increase performance and scalability with fast packet transfer and removing bottleneck problem by using TCP Splicing and Content-Aware Distributor method. This method is expected to be the noticeable technology that provides an important interface, which make application services for e-commerce effectively be applied to high-speed network infrastructure. At this time, it is required to study further on the optimum balancing method in the web server cluster environment so as to apply the hybrid (optimum load balancing method by software and hardware) method and improve the reuse of security cession based on high-speed TCP connections.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.45-54
• /
• 1996

The effect of graphite on the frictional characteristics of Cu-based sintered friction materials was studied by pin-on-disk type wear test. A study has been carried out concerning the optimum concentration of graphite in sintered friction material to obtain the minimum wear rate and low friction coefficient . Friction coefficient and wear rate were increased as increasing the content of graphite in the matrix. In the study the optimum concentration of graphite was 19vol % to get the minimum wear rate and optimal frick'ion coefficient.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.21-22
• /
• 2013

Nowadays, the fiber which mixed with concrete matrix always has low adhesion with cement paste. It's difficult to use fiber to reinforce the structure. For more adding fiber in concrete would cause some problems as the low flowability and surface polishing. Further study is needed in fiber using. In this research, further study in fiber reinforced concrete has been invested. Various fibers with different properties have been used to prevent cracking. Fiber reinforced concrete's fundamental properties as slump, air content, compressive strength and tensile strength have been tested. Optimum type of the fiber and optimum addition ratio of fiber has been invested to increase the utility of the fiber which used in concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.61-64
• /
• 2004

This study is to investigate the engineering and shrinkage properties of concrete incorporating shrinkage reducing agent(SRA) and expansive additive(EA) in order to reduce shrinkage of concrete. According to results, as for the properties of fresh concrete, increase in, SRA and EA content leads to reduce the fluidity but to increase the air content, and as for setting time, there is little difference. For strength properties, it decreased with an increase in SRA dosage and increased up to 5% of EA content. For the properties of drying shrinkage, it shows decline tendency with an increase in SRA and EA content reiteratively. It alto reduces significantly with the combination of SRA-EA systems due to the combined effect of the admixture. In the scope of this paper, it is found that the use of SRA with 0.5％ and EA with 5% has optimum effects on the various properties of concrete. And under the combination of SRA and EA, it can reduce drying shrinkage about 37%.

• Journal of the Korean Society for Heat Treatment
• /
• v.14 no.1
• /
• pp.17-21
• /
• 2001

The effects of Cr content above its solubility limit and thermomechanical treatment on tensile strength and electrical conductivity of Cu-Cr alloys were studied to obtain optimum Cr content exhibiting a high tensile strength without degradation of electrical conductivity. The increase in Cr content above the solubility limit increased tensile strength of Cu-Cr alloys without deterioration of the electrical conductivity. The electrical conductivity was not affected by cold rolling. The electrical conductivity of a Cu-3.5%Cr alloy subjected to cold rolling ${\rightarrow}$ aging treatment ($450^{\circ}C{\times}1hr$) ${\rightarrow}$ cold rolling was equal to that of the alloy subjected to cold rolling ${\rightarrow}$ aging treatment. However, the tensile strength of the alloy subjected to the former thermomechanical treatment was superior to that of the alloy subjected to the latter thermomechanical treatment at all the deformation degrees.

• Natural Product Sciences
• /
• v.24 no.3
• /
• pp.199-205
• /
• 2018

To determine the optimum extraction conditions that give the highest yield of isoquercitrin and caffeic acid from Aster scaber, the effects of four extraction variables (solvent concentrations, extraction time, number of repeated extraction, and solvent volumes) on isoquercitrin and caffeic acid yield was examined via HPLC-UV. Our results showed that the highest extract and isoquercitrin yield were observed when A. scaber was extracted with 450 mL distilled water for 8 hr repeatedly for three times. In case of caffeic acid, the content was higher in the two repeated extracts. Also, content analysis of isoquercitrin in Aster species was performed in which A. fastigiatus, A. ageratoides, and A. scaber exhibited the highest isoquercitrin content at 6.39, 5.68, and 2.79 mg/g extract, respectively. In case of caffeic acid, the highest content of A. scaber and A. glehni was 0.64 and 0.56 mg/g extract, respectively. This study reports an optimized method for extraction of isoquercitrin and caffeic acid from A. scaber and evaluates potential sources of the compounds.