• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.6 s.249
• /
• pp.691-697
• /
• 2006

Metamodel, model of model, has been widely used to improve an efficiency of optimization process in engineering fields. However, global metamodels of constraints in a constrained optimization problem are required good accuracy around neighborhood of optimum point. To satisfy this requirement, more sampling points must be located around the boundary and inside of feasible region. Therefore, a new sampling strategy that is capable of identifying feasible domain should be applied to select sampling points for metamodels of constraints. In this research, we suggeste sequential feasible domain sampling that can locate sampling points likely within feasible domain by using penalty function method. To validate the excellence of feasible domain sampling, we compare the optimum results from the proposed method with those form conventional global space-filling sampling for a variety of optimization problems. The advantages of the feasible domain sampling are discussed further.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.209-214
• /
• 2003

This study presents the analysis of ball end milling machinability and its application to the determination of the optimum feedrate in the CNC machining process of sculptured surface. The methods which estimate the cutting force system is approached experimentally. The estimation strategy, named technological processor, was applied to the machining process of sculptured surface for finding optimum variable feedrate. From the result of practical implementation for the test model, it is ascertain that the technological processor have brought the dispersion of force profiles. As compared with conventional imposing of cutting conditions, the machining time has reduced by more than 60%.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.9 s.90
• /
• pp.819-826
• /
• 2004

A multi-step optimum strategy for the selection of the locations and directions of strain gauges is proposed in this paper to capture at best the modal response of blade in a series of modes on fan blades. It is consist of three steps including two pass reduction step, genetic algorithm and fine optimization to find the locations-directions of strain gauges. The optimization is based upon the maximum signal-to-noise ratio(SNR) of measured strain values with respect to the inherent system measurement noise, the mispositioning of the gauge in location and gauge failure. Optimal gauge positions for a fan blade is analyzed to prove the effectiveness of the multi-step optimum methodology and to investigate the effects of the considering parameters such as the mispositioning level, the probability of gauge failure, and the number of gauges on the optimal strain gauge position.

• Journal of Information Technology Applications and Management
• /
• v.13 no.4
• /
• pp.1-12
• /
• 2006

Many software reliability growth models(SRGM) have been proposed since the software reliability issue was raised in 1972. The technology to estimate and grow the reliability of developing S/W to target value during testing phase were developed using them. Most of these propositions assumed the S/W debugging testing efforts be constant or even did not consider them. A few papers were presented as the software reliability evaluation considering the testing effort was important afterwards. The testing effort forms which have been presented by this kind of papers were exponential, Rayleigh, Weibull, or logistic functions, and one of these 4 types was used as a testing effort function depending on the S/W developing circumstances. I propose the methology to evaluate the SRGM using least square estimator and maximum likelihood estimator for those 4 functions, and then examine parameters applying actual data adopted from real field test of developing S/W.

• Communications for Statistical Applications and Methods
• /
• v.22 no.5
• /
• pp.445-462
• /
• 2015

This article deals with the problem of estimation of the population mean in presence of multi-auxiliary information in two occasion rotation sampling. A multivariate exponential ratio type estimator has been proposed to estimate population mean at current (second) occasion using information on p-additional auxiliary variates which are positively correlated to study variates. The theoretical properties of the proposed estimator are investigated along with the discussion of optimum replacement strategies. The worthiness of proposed estimator has been justified by comparing it to well-known recent estimators that exist in the literature of rotation sampling. Theoretical results are justified through empirical investigations and a detailed study has been done by taking different choices of the correlation coefficients. A simulation study has been conducted to show the practicability of the proposed estimator.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.89-97
• /
• 1997

A genetic algorithm (GA) is a stochastic direct search strategy that mimics the process of genetic evolution. The GA applied herein works on a population of structural designs at any one time, and uses a structured information exchange based on the principles of natural selection and wurvival of the fittest to recombine the most desirable features of the designs over a sequence of generations until the process converges to a "maximum fitness" design. Principles of genetics are adapted into a search procedure for structural optimization. The methods consist of three genetics operations mainly named selection, cross- over and mutation. In this study, a method of finding the optimum topology of truss/beam structure is pro- posed by using the GA. In order to use GA in the optimum topology problem, chromosomes to FEM elements are assigned, and a penalty function is used to include constraints into fitness function. The results show that the GA has the potential to be an effective tool for the optimal design of structures accounting for sizing, geometrical and topological variables.variables.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.76-85
• /
• 1998

Recently, Genetic Algorithm(GA) is widely adopted into a search procedure for structural optimization, which is a stochastic direct search strategy that mimics the process of genetic evolution. This methods consist of three genetics operations maned selection, crossover and mutation. Contrast to traditional optimal design techniques which use design sensitivity analysis results, GA, being zero-order method, is very simple. So, they can be easily applicable to wide area of design optimization problems. Also, owing to multi-point search procedure, they have higher probability of converge to global optimum compared to traditional techniques which take one-point search method. In this study, a method of finding the optimum values of suspension parameters is proposed by using the GA. And vehicle is modelled as planar vehicle having 5 degree-of-freedom. The generalized coordinates are vertical motion of passenger seat, sprung mass and front and rear unsprung mass and rotate(pitch) motion of sprung mass. For rapid converge and precluding local optimum, share function which distribute chromosomes over design bound is introduced. Elitist survival model, remainder stochastic sampling without replacement method, multi-point crossover method are adopted. In the sight of the improvement of ride comfort, good result can be obtained in 5-D.O.F. vehicle model by using GA.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.199-206
• /
• 2002

The application of GSIS for most route determination is provided by selecting several basic data such as land use, land construction quantity and land price, and then establishing a database to analyze for the route determination. However, this strategy rarely considers the complicated multi-factors that are essential for route determination. To solve this problem, it is required to use the GSIS and attempt to support the decision of majority for optimum route determination and standardize the route determination procedure. Accordingly, in this study, the qualification of multi-factors was attempted using the AHP technique, and so the data for the route determination was provided effectively, which resulted in the optimum route determination. As a result of applying the AHP technique, optimum routes were selected more rationally than randomly applying the values of multi-factors as before.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2293-2298
• /
• 2011

In this paper, A tag antenna structure for RFID application with resonant frequency of 920MHz is proposed using the meander line technique and Evolution Strategy. Miniaturization structure design for a tag antenna is performed by structure combining the half-wave dipole with a meander line. To achieve this, an interface program between a commercial EM analysis tool and the optimal design program is made for implementing the evolution strategy technique that seeks a global optimum of the objective function through the iterative design process consisting of variation and reproduction. The optimized tag antenna size is 63mm ${\times}$ 15mm ${\times}$ 1mm. And the proposed antenna is realized on FR-4 substrate (${\epsilon}_r=4.4$, $tna{\delta}=0.02$).

• Journal of Advanced Marine Engineering and Technology
• /
• v.27 no.4
• /
• pp.479-486
• /
• 2003

This paper presents the Performance of PV(Photovoltaic) system. the design of MPPT and the battery characteristic. The output power of PV depends on the environmental factors such as insolation and cell temperature. It is proposed that the MPPT is based on an simple power control algorithm. Furthermore the converter has to maintain the optimum duty ratio. A switching strategy of converter for battery may Protect against excessive discharge and overcharge. This paper includes discussion on system reliability power quality and effects of the randomness of the wind and the solar radiation on system design.