• Advances in Computational Design
• /
• v.5 no.3
• /
• pp.323-347
• /
• 2020

The enhancements of bioenergy production effectiveness require the comprehensively experimental study of several parameters affecting these bioprocesses. The interpretation of the obtained experimental results and the estimation of optimum yield are extremely complicated such as misinterpreting the results of an experiment. The use of mathematical modeling and statistical experimental designs can consistently supply the predictions of the potential yield and the identification of defining parameters and also the understanding of key relationships between factors and responses. This paper summarizes several mathematical models used to achieve an adequate overall and maximal production yield and rate, to screen, to optimize, to identify, to describe and to provide useful information for the effect of several factors on bioenergy production processes. The usefulness, the validity and, the feasibility of each strategy for studying and optimizing the bioenergy-producing processes were discussed and confirmed by the good correlation between predicted and measured values.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.1
• /
• pp.21-29
• /
• 2001

The general topology optimization can be considered as optimal material distribution. Such an approach can be unstable, unless composite materials are introduced. In this research, a nodal volume fraction method is used to obtain the optimum topology of continuum structures. This method is conducted from a composite material model composed of isotropic matter and spherical void. Because the appearance of the chessboard patterns makes the interpretation of the optimal material layout very difficult, this method contains a chessboard prevention strategy. In this research, several topology optimization problems are presented to demonstrate the validity of the present method and the recursive quadratic programming algorithm is used to solve the topology optimization problems.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.4
• /
• pp.760-768
• /
• 2014

Yet logistics base in China has a refrigerated storage facilities installed areas, the number of those is very limited and is generally insufficient. According to these especial points, a new construction cold chain logistics network design strategy is required from how to use the existing refrigerated warehouses to new issue. For example, however refrigerated storage facility is supplied, can it satisfy all demand of this area? Then does it have optimized location of this area? If future demand expansion, adding that already other refrigerated storage facilities matter? Or, add another refrigerated facilities, optimum cold chain established a network matter? So on. Above problems can be occurred. In order to solve facing many of these issues of distribution network, northeast area in China has been selected as a subject, and we designed a new cold chain distribution network.

• Korean Management Science Review
• /
• v.19 no.1
• /
• pp.29-38
• /
• 2002

Due to the rapid increase In the Internet traffic volume, ISPs are faced with the definite need of the expansion of server capacity. In order to Provide prompt services for customers and still prevent excessive facility cost, it is critical to determine the optimum level of internet server capacity. The purpose of this Paper is to provide a simple but effective strategy on the expansion of servers capacity according to the increase in internet traffic. We model an internet server as an M/G/m/m queueing system and derive an efficient method to compute the loss probability which, In turn, Is used as a basis to determine proper server capacity. The Process of estimating the traffic parameter values at each server based on log data analysis is also given. All the procedures are numerically demonstrated through the process of analyzing actual log data collected from a game company.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.269-270
• /
• 2002

Oxygen is a key substrate in animal cell metabolism and its consumption is thus a parameter of great interest for monitoring and control in animal cell culture bioreactor. The use of a gas-permeable membrane offered the possibility to provide the required quantity of oxygen into the culture. while avoiding problems of foaming or shear damage generally linked to sparging. For determining the optimum DO control strategy of this gas-permeable membrane aeration bioreactor, the oxygen transfer rate coefficient was measured with varying $N_2$ ratio in inlet air. The results showed that an increasing mass flow rate of nitrogen reduced the $K_La$ value. and 5% nitrogen in air did not result in any oxygen limitation.

• Journal of Korean Society for Quality Management
• /
• v.18 no.1
• /
• pp.116-128
• /
• 1990

Consumer's demand level for products and goods selection power is considerably improved. The pressure of loss compensation is also being accelerated by products which bring damage on property. The producer prevents the loss from causing poor products and considering the quality cost allotment in these circumstances. That is to say, producer should be concerned with the strategy of product liability prevention instead of passive defence policy. This paper intends to estabilish the optimum quality cost in considering product liability, and present the correlation of quality cost elements and multiple regression analysis. It can utilized in qualitycost and budget planning.

• KSBB Journal
• /
• v.14 no.4
• /
• pp.482-489
• /
• 1999

As host for the production of eucaryotic heterologous proteins, methylotrophic yeast Pichia pastoris and Hansenula polymorpha are the most highly developed of a small group of alternative yeast species chosen for their perceived advantages. This paper describes the method to enhance the recombinant protein productivity with P. pastoris and H. Plymorpha. In these experiments, the effects of methanol induction timing, induction method, pH, culture temperature and kinds of nitrogen sources on foreign protein production were tested with P. pastoris and compared with H. polymorpha.. In addition, optimum methanol concentration as inducer and the effects of carbon sources on AOX1 or MOX promoter repression and secretion efficiency were also studied in both cases.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.2
• /
• pp.35-44
• /
• 2003

A system reliability method is proposed to decide reliable serviceability of agricultural irrigation system. Even though reliability method is applied to real engineering situations involving actual life environments and maintaining costs, a number of Issues arise as a modeling and analysis level. This article use concepts that can be described the probability of failure with time variant and series-parallel system reliability analysis model. A proposed method use survivor function that can simulate a time-variant performance function for a lifetime before it is required essential maintenance or replacement to define a target probability of failure in agricultural irrigation canal. In the further study, it is required a relationship between a state of probability of failure and current serviceability to make the optimum repair strategy to maintain appropriate serviceability of an irrigation system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.219-226
• /
• 2012

Recently real-estate investment business is standing out as a new plan for creation of source of income. In this paper, we suggested appropriate real-estate investment strategy through the reconstruct case study of existing one-storied building. That is, we showed the efficient process of decision and propel to reconstruct and the key points for lease business and post management after building completion. Also, we analyzed the rate of return of commercial building investment in order to find its optimum dealing time. Therefore the results of this paper are expected to be a help to old ages and persons laying plans for a similar business.

• Nuclear Engineering and Technology
• /
• v.43 no.4
• /
• pp.383-390
• /
• 2011

Nuclear power has become an essential part of electricity generation to meet the continuous growth of electricity demand. A Sodium-cooled Fast Reactor (SFR) was developed to extend uranium resource utilization under a growing nuclear energy scenario while concomitantly providing a nuclear waste management solution. Key questions in this scenario are when to introduce SFRs and how many reactors should be introduced. In this study, a methodology using Linear Programming is employed in order to quantify an optimized growth pattern of a nuclear energy system comprising light water reactors and SFRs. The optimization involves tradeoffs between SFR capital cost premiums and the total system U3O8 price premiums. Optimum nuclear growth patterns for several scenarios are presented, as well as sensitivity analyses of important input parameters.