• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1993년도 봄 학술발표회논문집
• /
• pp.135-140
• /
• 1993

The optimum weight design of structure is to determine the combination of structural members which minimize the weight of structures and satisfy design conditions as well. Since most of loads and design variables considered in structural design have uncertain natures, the reliability-based optimization techniques need to be developed. The aim of this study is to estabilish the general algorithm for the minimum weight design of transmission tower structure system with reliability constraints. The sequential linear programming method is used to solve non-linear minimization problems, which converts original non-linear programming problems to sequential linear programming problems. The optimal solutions are produced for various reliability levels such as reliability levels inherent in current standard transmission tower cross-section and optimal transmission tower cross-section obtained with constraints of current design criteria as well as selected target reliability index. The optimal transmission towers satisfying reliability constraints sustain consistent reliability levels on all members. Consequently, more balanced optimum designs are accomplished with less structural weight than traditional designs dealing with deterministic design criteria.

• Journal of Advanced Marine Engineering and Technology
• /
• 제2권1호
• /
• pp.3-14
• /
• 1978

The authors have developed a calculating method of propeller shaft alignment by the finite element method. The propeller shaft is divided into finite elements which can be treated as uniform section bars. For each element, the nodal point equation is derived from the stiffness matrix, the external force vector and the section force vector. Then the overall nodal point equation is derived from the element nodal point equation. The deflection, offset, bending moment and shearing force of each nodal point are calculated from the overall nodal point equation by the digital computer. Reactions and deflections of supporting points of straight shaft are calculated and also the reaction influence number is derived. With the reaction influence number the optimum alignment condition that satisfies all conditions is calculated by the simplex method of linear programming. All results of calculation are compared with those of Det norske Veritas, which has developed a computor program based on the three-moment theorem of the strength of materials. The authors finite element method has shown good results and will be used effectively to design the propeller shaft alignment.

• 소성∙가공
• /
• 제5권2호
• /
• pp.138-144
• /
• 1996

The differences of formability with maximum cup depth of drawn product and thickness strain distribution are compared for two kinds of blank shapes which are suggested optimum shape and conventional square shape. The suggested blank is determined by backward tracing technique of rigid-plastic FEM. The deeper cup without wrinkle and flange part could be obtained from the suggested blank shape however the cross sevtion sup from the square blank could not be kept smooth thickness strain distribution and defended those phenomena..

• ETRI Journal
• /
• 제18권1호
• /
• pp.15-27
• /
• 1996

The effects of $Nd_2O_3$ and $TiO_2$ addition on the microstructures and microwave dielectic properties of $BaO-Nd_2O_3-TiO_2$ system were investigated. $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_{5}O_{14}$ phases were observed for compositions based on BaO/$Nd_2O_3$ = 1 ratio. The compositions deviated from $BaO/Nd_2O_3=1$ ratio were composed of major phases of $BaNd_2Ti_4O_{12}$ or $BaNd_2Ti_5O_{14}$, and the compound of $Nd_2O_3$ and $TiO_2(Nd_2Ti_2O_7)$ or that of BaO and $TiO_2(BaTi_4O_9)$. The microstructure of ceramic with $BaO{\cdot}Nd_2O_3{\cdot}4TiO_2$ composition varied from spherical grains to needlelike grains with increasing sintering temperature. With increasing $Nd_2O_3$, the optimum sintering temperature with maximum density increased, and the dielectric constant(${\varepsilon}_r$) and quality factor(Q) decreased due to the formation of secondary phases. With increasing $TiO_2$, the optimum sintering temperature and the dielectric constant decreased with increased Q value. And the temperature coefficient of resonant frequency, ${\tau}_f$ shifted toward positive direction. The dielectric ceramics with $BaO/Nd_2O_3=1$ showed Q values of above 2000 and dielectric constants of above 80 at 3GHz.

• 터널과지하공간
• /
• 제22권1호
• /
• pp.43-53
• /
• 2012

개착면의 방향성과 규모가 점진적으로 변화되는 개착사면의 안정성을 지반의 암석학적, 구조적 및 역학적 특성을 종합적으로 고려한 횡단면 분석기법을 활용하여 분석하였다. 시추작업을 수행하여 획득한 코어시료를 관찰하여 사면지반의 암석학적 취약성을 조사하였으며, 시추공 내 BIPS 영상을 획득하여 사면 내부의 구조적 특성을 규명하였다. 시추코어 및 코어절리시료를 이용한 암석실험을 통해 사면 지반의 공학적 특성을 분석하였다. 평사투영해석을 수행하여 잠재적인 사면거동 양상과 거동유발 절리들을 분석하였으며, 거동유발 절리들의 트레이스 분포를 개착 형상이 고려된 횡단면상에 도시하였다. 횡단면에 분포된 평면파괴 절리들이 기저면을 형성하는 평면블록들을 절리 트레이스 분포를 고려하여 설정하였다. 횡단면 상에서 심도별 평면블록들의 안정성과 적정 안전율을 유지하기 위하여 요구되는 지보량을 산정하여 최적 사면 설계안 수립에 대한 횡단면 기법의 활용성을 고찰하였다.

• 한국도로학회논문집
• /
• 제11권4호
• /
• pp.9-15
• /
• 2009

본 연구는 도로안전 시설물의 풍하중에 의한 손상발생 사례를 토대로 현행 도로안전 시설물의 구조적 휨 성능을 평가하고 이에 대한 부재별 휨 성능개선을 위한 연구이다. 본 연구의 대상구조물로는 대표적인 도로안전시설물이며 풍하중에 대한 선행 피해사례가 밝혀진 방음벽 지주프레임을 대상으로 고려하였으며 이들 지주프레임의 휨 구조성능 및 형상설계에 대한 평가를 우선적으로 수행하였다. 본 연구평가 결과에서 나타난 현행 보강재의 구조적 성능을 토대로 중량 대비 구조적 강성이 우수한 유리섬유 강화플라스틱 (GFRP)을 활용하여 다양한 보강 형태에 따른 성능개선방법을 해석 및 실험적 연구를 통하여 수행하였다. 그 결과 효율적 성능개선을 위한 GFRP 적용방법의 경우 구조적, 시공적 측면에서 효율적인 것으로 평가되었고 자체적인 형상단면 최적설계를 통한 개선방법도 성능보강에 효과적인 것으로 해석적으로 평가되었다. 본 연구에서 적용된 GFRP 단면보강 및 최적형상설계 연구는 향후 노후 도로안전 시설물의 풍하중 또는 태풍으로 인한 피해예방을 위한 기초자료로서 효율적으로 활용될 수 있을 것으로 판단된다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 제 25회 정기총회 및 추계학술발표회
• /
• pp.51-58
• /
• 2000

The purpose of this study is the optimum modification of dynamic characteristics of stiffened plate structure. In the method of the optimization ,finite element method (FEM), sensitivity analysis and optimum structural modification method are used. To begin with, using FEM, the dynamic characteristics of stiffened plate structure is analyzed. Next, rate of change of dynamic characteristic by the change of design variable is calculated using the sensitivity analysis. Then, amount of change of design variable is calculated using this sensitivity value and optimum structural modification method. The change of natural frequency is made to be an objective function. Thickness of plate and cross section moment become a design variable. It is shown that the results are effective in the optimum modification for dynamic characteristics of the stiffened plate structure.

• 대한조선학회논문집
• /
• 제45권2호
• /
• pp.151-156
• /
• 2008

It is necessary to perform the research works on the general structural designs and optimum structural designs of double hull tankers and bulk carriers due to the newly built Common Structural Rules(CSR). In this study, an optimum structural design of a mid-ship part of double hull oil tanker was carried out by using the CSR. An optimum structural design program was developed by using the Pareto optimal based multi-objective function method. The hull weight and fabrication cost obtained by the single and multi-objective function methods were compared with existing ship by the consideration of CSR and material cost which is recently increasing.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.690-695
• /
• 2002

Two plate girders bridge has an advantage for execution of works and quality control because of its simplicity of super-structure caused by decreasing in amount of members and also is distinguished as aesthetic bridge type. Recently this has been adopted for structure of highway as well railway and introduced into domestic. In order to plan or design two plate girders bridge more rationably, it is necessary to comprehend its structural behavior as well as to consider the critical resign factors. Thus, in this study the formulation of optimum design for two plate girders bridge is proposed and the critical resign variables ani restraints are considered and founded by caring out optimum design. The objective function of optimization is formulated as a minimum cost design problem. And the thickness and length of I-shaped section are decided as resign variables. The design constraints are formulated based on Design Criteria for Railroad(Bridges). By comparing the optimum results with those of the conventional resign, the effectiveness of proposed optimum design formulation is investigated. From the results, the way to do optimum design of two plate girders bridge is suggested.

• 해양환경안전학회지
• /
• 제23권7호
• /
• pp.918-925
• /
• 2017

함정 외부 탑재 장비의 복잡한 형상에 의해서 발생하는 다중반사는 경로를 예측하기 어렵고 높은 RCS(Radar Cross Section)의 원인이 된다. 따라서 함정의 외부 탑재 장비의 최적배치 설계가 RAS(Radar Absorbing Structure) 방법으로 고려되어야 한다. 본 논문에서는 함정 외부 탑재 장비에서 발생하는 다중반사와 RCS를 최소화하기 위하여 함정 외부 탑재 장비 최적배치를 수행하였다. 외부 탑재 장비 최적배치에 사용된 알고리즘은 순차적 내림차순 방법을 이용하였다. 함정 외부 탑재 장비 최적배치를 수행하기 위하여 LCS-2 type을 해석 모델로 선정하였다. 계산 비용을 줄이기 위해서 장비의 기여도 분석 및 다중반사 경로 분석 등을 통해 최적 배치를 수행할 장비를 선정하였고 최적배치를 통해 RCS가 최소가 되는 최적배치 위치를 도출하였다. 또한 RCS 변화에 따른 레이다의 탐지거리 변화율을 이용하여 RCS 감소효과를 분석 하였다.