• Structural Engineering and Mechanics
• /
• v.61 no.4
• /
• pp.441-451
• /
• 2017

The need of progress in engineering designs especially for aerospace structure is nowadays becoming a major industry request. The objectives of this work are to quantify the influence of material and operational uncertainties on the performance of the aerodynamic behavior of an Aircraft Wing, and to give a description of the most commonly used methods for reliability based design optimization (RBDO) to point out the advantages of the application of this method in the design process. A new method is proposed, called Safest Point (SP) that can efficiently give the reliability-based optimum solution for freely vibrating structures with and without fluid flow.

• Journal of Korean Society of Transportation
• /
• v.13 no.1
• /
• pp.95-110
• /
• 1995

n this research neural -based model was developed to forecast link travel times , And it is also compared wiht other time series forecasting models such as Box-Jenkins model, Kalman filter model. These models are validated to evaluate the accuracy of models with real time series data gathered by the license plate method. Neural network's convergency and generalization were investigated by modifying learning rate, momentum term and the number of hidden layer units. Through this experiment, the optimum configuration of the nerual network architecture was determined. Optimumlearining rate, momentum term and the number of hidden layer units hsow 0.3, 0.5, 13 respectively. It may be applied to DRGS(dynamic route guidance system) with a minor modification. The methods are suggested at the condlusion of this paper, And there is no doubt that this neural -based model can be applied to many other itme series forecating problem such as populationforecasting vehicel volume forecasting et .

• Journal of the Korean Solar Energy Society
• /
• v.29 no.2
• /
• pp.47-54
• /
• 2009

The amount of incident rays over inclination according to direction has been widely utilized as important data m installing solar thermal systems. To optimize the incident solar radiation, the slope, that is the angle between the plane surface in question and the horizontal, and the solar azimuth angles are needed for these solar thermal systems. This is because the performance of the solar thermal systems in much affected by angle and direction of incident rays. Recognizing that factors mentioned above are of importance, actual experiment on the moving route of the sun have been performed in this research to obtain the angle of inclination with which the maximum incident rays can be absorbed. After all, the standard for designing highly optimized solar thermal systems will be provided for designers and employees working in the solar collector related industries.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.365-372
• /
• 1991

LAS (lithium aluminosilicate) sol was synthesized using the hydrolysis-condensation reaction of TEOS, chelated Al(OBus)3 and Li-salt with H2O in alcohol (EtOH+2-Propanol) medium. Effects of important reaction parameters on the properties of sol and gel-derived LAS were examined. The crystallization of the sol-gel derived LAS with ${\beta}$-spodumene composition began at ∼600$^{\circ}C$, and a series of polymorphic transformations occurred as temperature was increased to 1100$^{\circ}C$: amorphous LAS\longrightarrowhexagonal LiAl(SiO3)2\longrightarrow${\beta}$-spodumene. Lowering Li content in the gel enhanced densification and retarded the crystallization significantly. Optimum reaction conditions of LAS sol formation for thin coating applications were derived from rheological measurements, and these can be summarized as: H2O/total alkoxides molar ratio=4, pH=∼2.5, and aging time of ∼250h.

• Proceedings of the KOR-KST Conference
• /
• 1995.12a
• /
• pp.111-124
• /
• 1995

첨단 교통 체계(Intelligent Transport Systems)의 중요한 요소인 첨단 교통 관리 체계(Advanced Traffic Management Systems)의 성공 여부는 교통정보를 어떻게 제공하고 통제하는데 의존하다. 즉, 정보 제공 방식과 이데 대한 운전자의 반응을 정확하게 파악하고 예측하여야 ITS를 성공적으로 구축할 수 있다. 이 논문에서는 동적 차량 길잡이 장치의 효용성을 평가하기 위한 확률적 통행배정모형을 개발하는 것이다. 개발된 통행배정모형은 운전자의 동적행태조정(Dynamic Behavioural Adjustment)을 명백하게 확솔 과정(Stochastic Process)으로 표현하여 기존의 모형에 비해 통해자들의 행태를 더욱 실제적으로 반영한다. 특히, 각 통행자들에게 K개의 최소경로시간을 제공해줌으로 인하여 통행자의 노선선택에 대한 선택폭을 증가시켜준다. 통행경로의 선택폭의 증가는 쟁점으로 대두되는 문제(교통항제소에서는 차량 길잡이 보유 운전자에게 체계최적(System Optimum)와 이용자최적(User Equilibrium)중 어떠한 원칙하에 교통정보를 제공하여야 하는가에 대한 해결 방안이다. 왜냐하면 만약 교통급제소에서 운전자에게 통행정보를 체계 최상을 하기 위해 정보를 제공하고자 하면, 길잡이 장착 운전자는 더 이상 제공된 정보를 따르지 않고 자기 스스로의 경에 의해 이용자 최상을 달성하고자 할 것이다. 이 논문의 목적은 이러한 복잡한 통행자의 경로선택행위를 반영하는 확률적 평형 통행 배정 모형을 여러가지 통계기법을 도입하여 개발하는 것이다.

• Spatial Information Research
• /
• v.11 no.3
• /
• pp.275-289
• /
• 2003

This study focused on offering a helpful information for the touring. To develop a tour route guidance tool, it is needed to use a GIS function, which can suggest a possible shortest path based on time and distance. A Traveling salesman problem algorithm, which was developed to solve multi destination problem in network analysis, was used to implement a tour guidance system. This system was developed using ArcObjects programming components within ArcGIS 8.3. Jeju city was selected for the case study to apply the tool and to test the effectiveness of it. This study demonstrated that this tool was considerably effective for finding a probable optimum tour path in the following aspects. First, it can help tourists to select several attractions from numerous tour sites in an area given limited time. Second, tourist can manage time efficiently by organizing their tour courses on the basis of the tool. Third, tourists can reduce the uncertainties that may happen under unexpected situations in unfamiliar places by obtaining specific spatial information using the tool. Fourth, the Graphic User Interface of the tool can be easily used to obtain visual information of spatial data.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.62-69
• /
• 2006

This study was carried out to measure and analyze the storage condition, distribution route, and packaging method of four selected agricultural products(small tomato, cabbage, peach, and carrot) in the cold chain system. It was shown that dew-forming phenomenon by fruits and vegetables deteriorates the agricultural product quality and physical properties of corrugated fiberboard box during the cold chain system. The compressive strength deterioration in corrugated fiberboard boxes was much greater for single wall(SW) corrugated fiberboard containers than for double wall(DW) in low temperature-high humidity condition. To reduce the deterioration of box and dew-forming phenomenon, water-repellency treatment should be over $R_6$. However, water-resistant treatment of corrugated fiberboard containers would be effective under high relative humidity conditions more than 75% RH. It was suggested that functional corrugated fiberboard box packaging would be an optimum method to reduce the deterioration of agricultural products quality by. It was also achieved controlling the relative humidity and temperature during the storage and physical distribution process.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.2
• /
• pp.81-89
• /
• 1996

A design method of fuzzy modeling is presented for the model identification of route choice of traffic problems.The proposed fuzzy modeling implements system structure and parameter identification in the eficient form of""IF..., THEN-.."", using the theories of optimization theory, linguistic fuzzy implication rules. Three kinds ofmethod for fuzzy modeling presented in this paper include simplified inference (type I), linear inference (type 21,and proposed modified-linear inference (type 3). The fuzzy inference method are utilized to develop the routechoice model in terms of accurate estimation and precise description of human travel behavior. In order to identifypremise structure and parameter of fuzzy implication rules, improved complex method is used and the least squaremethod is utilized for the identification of optimum consequence parameters. Data for route choice of trafficproblems are used to evaluate the performance of the proposed fuzzy modeling. The results show that the proposedmethod can produce the fuzzy model with higher accuracy than previous other studies -BL(binary logic) model,B(production system) model, FL(fuzzy logic) model, NN(neura1 network) model, and FNNs (fuzzy-neuralnetworks) model -.fuzzy-neural networks) model -.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.112-123
• /
• 2017

The accurate forecasting of the public transportation's transit and arrival time has become increasingly important as more people use buses and subways instead of personal vehicles under the government's public transportation promotion policy. Using bus management system (BMS) data, which provide information on the real-time bus location, operation interval, and operation history, it is now possible to analyze the bus schedule reliability. However, the punctuality should always be considered together with the operation safety. Therefore, this study suggests a new methodology to secure both reliability and safety using the BMS data. Unlike other studies, we calculated the bus travel time between two bus stops by dividing the total travel length into 6 sections using 5 different measuring points. In addition, the optimal travel time for each bus route was proposed by analyzing the mean, standard deviation and coefficient of variation of the each section's measurement. This will ensure the reliability, safety and mobility of the bus operation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2188-2208
• /
• 2023

Quality of Service (QoS) is a critical feature of Wireless Sensor Networks (WSNs) with routing algorithms. Data packets are moved between cluster heads with QoS using a number of energy-efficient routing techniques. However, sustaining high scalability while increasing the life of a WSN's networks scenario remains a challenging task. Thus, this research aims to develop an energy-balancing component that ensures equal energy consumption for all network sensors while offering flexible routing without congestion, even at peak hours. This research work proposes a Gravitational Blackhole Search Optimised splay tree routing framework. Based on the splay tree topology, the routing procedure is carried out by the suggested method using three distinct steps. Initially, the proposed GBSO decides the optimal route at initiation phases by choosing the root node with optimum energy in the splay tree. In the selection stage, the steps for energy update and trust update are completed by evaluating a novel reliance function utilising the Parent Reliance (PR) and Grand Parent Reliance (GPR). Finally, in the routing phase, using the fitness measure and the minimal distance, the GBSO algorithm determines the best route for data broadcast. The model results demonstrated the efficacy of the suggested technique with 99.52% packet delivery ratio, a minimum delay of 0.19 s, and a network lifetime of 1750 rounds with 200 nodes. Also, the comparative analysis ensured that the suggested algorithm surpasses the effectiveness of the existing algorithm in all aspects and guaranteed end-to-end delivery of packets.