• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.77-82
• /
• 2000

In this study, an automation assembly jig for the automation assembly process for the ventilation grille that is used in the interior of a car is developed. As the method that can do the automation assembly for the ventilation grille, a simple jig and air cylinder have been applied. And a solenoid valve, a filter regulator, and on-off switch have been used in controlling the system. Moreover, the timer is attached to the equipment so that a worker may control the assembly time, as fitting the quantity on demand of production. Actually with executing the assembly test productivity and performance of assembly have been verified. In case of the automation assembly work for a ventilation grille is compared to the manual work. The optimum working speed has been identified to make the process twice or three times better.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.33-38
• /
• 2010

As for an oil hydraulic vane pump of vehicle hydraulic systems, the highest of planning technique required by the acquisition of optimum profile data which can be available to predict noises and vibrations. Pressure pulsation may result in considerable vibration and noise of pump component as well as cavitation in hydraulic system. The influences of the discharge pressure and rotating speed of the vane on the dynamic pressure in chamber surrounding a vane have been investigated. It is very important to predict pressure pulsation in vane pump. This paper presents analysis of technique of vane pump for automatic transmission. The predicted result using AMESim model were good agreement with the experimentally obtained results.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.172-175
• /
• 2005

Recently international regulations governing the amount of harmonic currents(e.g IEC 61000-3-2) became mandatory and active Power factor correction (PFC) pre-regulator circuit became inevitable for the AC/DC converters. Among these topologies, the boost topology represents an optimum solution for a PFC pre-regulation in a high power application. This paper propose improved ZVT(Zero Voltage Transition) AC/DC PFC Boost using the average current control employing a soft-switching technique of the auxiliary switch with a minimum number of components. The conventional ZVT PFC Boost Converter has a disadvantage that the auxiliary switch turns off hard, which influences the overall efficiency and the EMI problem. In this paper, an improved ZVT PFC Boost converter using active snubber is proposed to minimize the switching loss of the auxiliary. The prototype of 100kHz, 640W system was implemented to show the improved performance.

• Korean Journal of Plant Resources
• /
• v.11 no.1
• /
• pp.1-8
• /
• 1998

This study was conducted to establish mass propagation system from the axillary bud culture of chrysanthemum zawadskii H. which was used as material of medicinal plants. Shoot egeneration was better on MS medium with NAA and BA. The optimum concentraions of growth regulator for shoot regeneration differed depending on accessionsof C. Zawadskii. Shoot regeneration in Keungucheolcho was better on MS Medium with NAA 0.01mg/1 and BA 0.1mg/1 while Hyangrobonggucheocho was better with NAA 0.1mg/1and BA 0.3mg/1. Addition of NAA into medium was effective for induction of root from shoots regenerated. Shoot multiplcation was more effective when 10mg/1 spermine was added into medium than when other polyamines were treated ino medium . Randomly and specifically amplified polymorphic DAC banding patterns based on polymerase chain reaction (PCR) analysis were used to assess the genetic variation of plants regenerated from in vitro culture.

• Korean Journal of Plant Resources
• /
• v.32 no.1
• /
• pp.19-28
• /
• 2019

An efficient shoot regeneration condition for pea cv. 'Sparkle' was developed by using optimum explant, plant growth regulator concentrations, and pretreatment of BA onto explant. The average shoot number per explant showed the highest on two kinds of shoot induction media (MSB5 media containing 2 mg/L BA and a combination of 2 mg/L BA and 1 mg/L TDZ) when cotyledonary node explants were cultured. Moreover, the pretreatment of explant in 200 mg/L BA solution was found to be more effective in shoot induction than that of non-pretreatment. By histological study, cell division and proto-meristem were formed near the surface of the sub-epidermal and epidermal cell layers of cotyledonary node in earlier than 3 days after culture. The analysis of genetic stability of regenerants by using thirteen ISSR markers showed that in vitro regenerated plants showed polymorphism with 8.3% compared with their mother plants.

• Journal of Ginseng Research
• /
• v.33 no.1
• /
• pp.65-71
• /
• 2009

This experiment was done to determine the optimum conditions for the induction of tetraploidy in Panax ginseng C. A. Meyer using bud length, temperature and plant growth regulator pretreatments. Highest callus formation was obtained when the medium was inoculated with flower bud in the size of 2-3 mm in length. The optimum temperature for the callus formation was high when treated at $4^{\circ}C$ for 4-5 days. Among the treatments of growth regulators and different concentration, highest callus formation was observed in combination of 5 mg/L 2,4-D and 1 mg/L kinetin for P. ginseng. As a result of flow cytometer analysis, all 7 adventitious roots were confirmed as tetraploidys. Cytological analysis revealed that the chromosome number of tetraploid roots was 96, while that of diploid roots was 48. Tetraploid ginseng roots were inoculated to flower bud size of 2-3 mm in length. The callus formation was optimum when treated with 1 mg/L 2,4-D at $4^{\circ}C$ for 5 days. Compared with control roots, tetraploid roots were thicker and longer and had few lateral branches. Fresh weight of tetraploid roots was relatively higher than the control roots.

• Journal of Environmental Science International
• /
• v.30 no.1
• /
• pp.77-85
• /
• 2021

This study was carried out to establish optimal conditions for breaking dormancy of Agastache rugosa O. Kuntze seeds. A series of experiments according to seed maturity and treatment with plant growth regulators were performed to improve germination percentage and synchronize germination of the seeds. In addition, it was conducted to test whether the useful effect of seed treatment before sowing leads to healthy seedling and early vigorous growth. The average seed size was 1.85 mm (length) × 0.82 mm(width). The seed size was much smaller than other vegetable seeds. Seeds colorappeared dark brown, the shape of the seeds was oval and the weight of 1,000seeds was 352.8 mg. The optimum germination temperature was 22℃. Light exposure during germination did not affect germination promotion, suggesting that A. rugosa seeds are a kind of dark germinating seeds. Seed dormancy lasted for 40 days after harvesting, and GA3 treatment of dormant seeds could break dormancy. There were significant differences in germination percentage and rate according to the maturity of seeds. The germination percentage of mature seeds was 10 - 18% higher than that of immature seeds, and germination rate was 2 days faster. GA3 treatment during growth regulator treatment improved germinability, but BAP or ethephone treatment did not. The optimal growth regulator concentration of for germination was the combination treatment of 100 mM GA3 ＋ 100 mM BAP.

• Horticultural Science & Technology
• /
• v.17 no.5
• /
• pp.572-577
• /
• 1999

Research was initiated to evaluate plant growth regulator effects on the vertical shoot growth of Korean lawngrass and to determine desirable growth regulator and its rate. The experiments were conducted twice at different sites in 1995. All the tested growth regulators inhibited the growth, but the inhibition period was variable among the product in Experiments I and II. During the first week after treatment, there was approximately 10 to 20% growth reduction in most of the treated plots. In the amidochlor-treated plots, growth suppression was effective for 3 to 4 weeks at low to medium rates ($0.60mL{\cdot}m^{-2}$). A Type II growth regulator, trinexapac-ethyl exceeding the medium rate of $0.08mL{\cdot}m^{-2}$ consistently tended to suppress vertical shoot growth for 8 weeks, being above 35% reduction in both experiments. In the plots applied with mefluidide, growth suppression appeared with foliar discoloration 3 or 4 days earlier than the other growth regulators and continued to work till the 8 weeks after treatment. Suppression intensity on vertical shoot growth increased with time after treatment up to a certain period of time, depending on growth regulators. Generally, the higher the application rate, the greater the suppression intensity. Seasonal variation of activity and effectiveness of growth regulators was observed, resulting in lower suppression intensity in July than in June. It is expected to reduce mowing requirements by 30 to up to 60% for a certain period with a specific growth regulator. In low to medium maintenance of Korean lawngrass turf, a long-term suppression may be more effectively accomplished with trinexapac-ethyl rather than mefluidide and amidochlor in terms of vertical shoot growth inhibition. Therefore, turf managers will need to select proper growth regulator and determine optimum rate of application for turfgrass management, based on a defined period of mowing reduction.

• Applied Biological Chemistry
• /
• v.38 no.2
• /
• pp.123-128
• /
• 1995

Several factors affecting on transformation efficiency were studied to establish a Agrobacterium rhizogenes mediated system for the transformation of Populus species, and We could obtaine tansgenic plantlets expressing the introduced gene. Leaf sections were more sensitive than stem sections to kanamycin and thought to be better material for transformant screening. The bacterial density did not affect on the efficiency of transformation over the range of $4{\times}10^5{\sim}7{\times}10^9\;cfu$. The optimum period for co-cultivation was one day or shorter. Both of the optimum concentrations of cefotaxime and ampicillin in the medium were $250\;{\mu}g/ml$ for elimination of bacteria from the inoculated leaf sections. The addition of acetosyringone in the bacterial culture medium increased transformation rate, and the highest rate was obtained at $50\;{\mu}M$ of acetosyringone. The transformed galls could be selectively induced and gown on the growth regulator-free medium or on the medium containing $100\;{\mu}g/ml$ or higher contrition of kanamycin. The roots were induced from the galls incited by A. rhizogenes within 3 weeks on the growth regulator-free medium as well as on the medium containing growth regulators. The plantlets were regenerated from the galls cultured for 6 weeks on the medium containing 0.05 mg/ml of NAA and 0.5 mg/ml of BA. The expressions of the introduced opine gene in the transformed galls and plantlets were confirmed by the analysis of agropine and mannopine.

• Journal of Plant Biotechnology
• /
• v.2 no.3
• /
• pp.123-128
• /
• 2000

To enhance in vitro plantlet regeneration efficiency of soybean through embryogenesis, the culture conditions such as material part and size of immature seed, 2,4-D, pH and solidifying agents for somatic embryogenesis were investigated. Somatic embryogenesis was induced from the immature embryo, immature cotyledon and embryonic axis explants of the immature seed on MS medium supplemented with 2.0 mg/L 2,4-D. The highest rate (up to 22.9%) of somatic embryogenesis was obtained from the immature cotyledon, following embryonic axis and the immature embryo. The rate varied with the developmental stages of seed. The maximum rate (25.4%) of embryogenesis was obtained from 3-4 mm length of the seed (after 25 days of flowering). The optimum concentration of 2,4-D for embryogenesis was 10 mg/L. The optimum pH was at 5.8 and solidifying agent for medium was better with 0.4% gelrite than with agar. For rapid multiplication of shoot tips from the germinating somatic embryos, they were cultured on MS medium containing 2 mg/L indole-3-butyyic acid (IBA) and 1 mg/L 6-benzyladenine (BA). After then somatic embryos with one and three cotyledons were transferred to the growth regulator free medium. The medium exhibited the higher rate (ca. 50%) of development than the multiplication medium.