• 한국항행학회논문지
• /
• 제22권6호
• /
• pp.551-556
• /
• 2018

과거에 비해 최근에는 항공기 비행 및 기상정보측정을 위하여 드론을 많이 활용하고 있다. 관련 응용분야로는 저고도 대기자료 측정, 대기미세먼지측정, 대기 오염측정 등이 있다. 그러나 대기자료 측정센서의 장착위치는 드론비행체의 구조적 특징 때문에 프로펠러 유동의 영향, 전자파 영향, 드론의 무게중심의 변화를 고려하여 장착하여야 한다. 이중에서 프로펠러에 의한 기체 상부의 공기유동은 센서의 풍속 및 풍향에 영향을 미치므로 최적 위치를 분석하여 선정해야 한다. 본 연구는 대기자료 측정센서의 적정 높이 선정에 대한 연구로, 유동 해석을 통하여 유동특성을 파악하고 실험 데이터를 비교 분석하여 적정 센서 장착 높이를 제시한다.

• Korean Chemical Engineering Research
• /
• 제48권4호
• /
• pp.490-498
• /
• 2010

K사의 방진고무 사출성형에 있어서 애로사항인 토크로드부시(torque rod bush)의 캐비티 가장자리(edge) 구간에서의 에어트랩(air-trap) 발생 및 다이내믹 댐퍼(dynamic damper)에 있어서 사출시 미성형(short shot) 발생 등의 문제점을 해결하기 위하여, 상용 CAE 프로그램인 MOLDFLOW(Ver. 5.2)를 이용한 전산모사를 수행하여 적정금형설계를 도출하고 적정작업조건을 구축하였다. 그 결과 방진고무 중에서 토크로드부시의 사출성형에서의 에어트랩 발생 등의 공정문제를 최적 캐비티 가장자리 경사각 및 게이트 수를 조절함으로써 캐비티 가장자리에서의 유동선단(flow-front)의 유동정체를 방지하고 유동을 원활하게 하여 해결하였다. 한편 다이내믹 댐퍼의 사출시 충전(filling) 단계에서의 캐비티 비충전으로 인한 미성형 불량은 에어벤트(air-vent) 구를 에어트랩 발생 빈도가 매우 높은 유동선단 상향류와 하향류의 두 흐름이 만나는 지점에 설치함으로써 미성형 불량을 해결하였다. 또한 게이트 위치를 댐퍼 상단에서 중단으로 변경하거나 게이트 수를 증가시킨 경우에 미성형 불량이 K사의 경우보다 개선되었다.

• 복식문화연구
• /
• 제14권3호
• /
• pp.387-403
• /
• 2006

The purpose of this study was to develop a new torso pattern for the schoolgirl of a tween generation who had different somatotype from children and teenagers. The subjects in this study were female elementary school students of fifth or sixth grade. Through a sensory evaluation of four existing torso patterns, the first research torso pattern was developed. Drafting methods of each item, which closed to the optimum value three, were selected. The differences between the values of the selected drafting methods and the optimum three were verified through a Wilcoxon's ranked sum test. The final research torso pattern was developed through adjusting the drafting methods according to the deviation from the optimum value three. The schoolgirl of a tween generation is at the time to show the remarkable breast development compared with a waist circumference, so the bust drafting was defined as B/4+ 1.25cm separately front and back. The drafting of a waist circumference was defined as W/4+1cm separately front and back which taken the ease amounts of the somatotype into consideration of the schoolgirl of a tween generation. A princess line was used instead of a waist dart because their hip circumference was more developed than a waist circumference. The crossed amount of a front hemline was 0.3cm and that of a back hemline was 0.7cm. and the princess line of the position was drawn with a straight line at a right angle of the back waistline. The armhole depth was determined B/4-1cm in consideration of the aesthetic and the trend, although the effective movement of upper arm was required.

• 한국정보통신학회논문지
• /
• 제20권3호
• /
• pp.669-676
• /
• 2016

북한은 단거리 탄도미사일에서부터 대륙간 탄도미사일에 이르기 까지 다양한 탄도미사일을 보유하고 있다. 단거리 탄도미사일의 위협에 직접적으로 노출되어 있는 우리나라는 이러한 위협에 대응하기 위해 다양한 미사일방어체계를 구축 중이며, 레이더는 표적을 탐지하기 위한 핵심 장비이다. 표적으로부터 레이더로 수신되는 전력에 영향을 미치는 요소에는 레이더의 송신전력, 안테나 이득, 운용 주파수, 표적의 RCS(Radar Cross Section), 표적과의 거리등이 있으며, 특히 표적의 RCS와 레이더-표적 간 거리는 레이더 고유의 성능이 아닌 외적 요인에 의해 결정되는 요소이다. 따라서 레이더의 표적 탐지율 향상을 위해서는 표적의 RCS가 크게 관측되는 위치와 표적까지의 거리를 함께 고려하여야한다. 본 논문에서는 SCUD-B 탄도미사일을 기준으로 RCS 패턴을 분석하고, 미사일 비행경로와 레이더 위치에 따른 레이더 수신 전력을 분석함으로써 최적의 레이더 배치 방안을 제안하였다.

• 대한심미치과학회지
• /
• 제24권1호
• /
• pp.39-48
• /
• 2015

전치부 임플란트의 심미성에 영향을 미치는 중요한 요소는 다음과 같다. 1) 임플란트 식립체의 올바른 위치, 2) 치조골의 충분한 양, 3) 연조직의 최적의 양. 임플란트 위치는 심미적인 치료결과를 얻는 데에 가장 중요한 요소일 것이다. 임플란트의 3차원적 위치는 치조제의 위치와 방향에 의해 결정된다. 임상가들은 수복물을 제작할 때 흔히 자연치를 모방하려 한다. 그러나 심미적인 진단 및 치료를 하는 과정에서 잊지 말아야 할 것은 얼굴형태, 입술, 치은, 치조제, 그리고 잔존치아들과의 상관관계를 고려하는 것이다. 전치부는 구치부에 비해 생물학적으로 불리하며, 조금이라도 임플란트 위치가 틀어지면 심미적으로 좋지 않은 결과를 야기할 수 있다. 임플란트 3치원적 위치의 생물학적, 보철적 의미를 이해한다면, 전치부에 더욱 심미적인 결과를 얻을 수 있을 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.473-478
• /
• 2003

To detect motions of bodies, we have discussed them with two viewpoints; one is a detection algorithm, and another is the hardware implementation. The former is to find small terms expansions for sine/cosine functions. We researched Maclaurin and optimum expansions, and moreover to reduce hardware amounts, revised the expansions. The expansions don't include divide calculations, and the error is within 0.01%. As for the former problem, there is another approach also; that is the cordic method. The method is based on the rotation of a vector on the complex plain. It is simple iterations and don't require large logic. We examined the precision and convergence of the method on C-simulations, and implemented on HDL. The later problem is to make FPGA within small gates. We considered approaches to eliminate a divider and to reduce the bit number of arithmetic. We researched Newton-Raphson's method to get reciprocal numbers. The higher-order expression shows rapid convergence and doesn't be affected by the initial guess. It is an excellent algorithm. Using them, we wish to design a detector, and are developing it on a FPGA.

• BMB Reports
• /
• 제30권3호
• /
• pp.222-228
• /
• 1997

Protein phosphatase 2C (PP2C) is one of the four major serine/threonine phosphatases which is dependent on $Mg^{2+}$ for its activity. PP2C was purified from rat liver cytosol and its characteristics were investigated. The substrate employed for routine assay was $[^{32}P]casein$ phosphorylated by PKA. The purification process involved DEAE chromatography, ammonium sulfate fractionation, phenyl sepharose chromatography, sephacryl 5-200 gel filtration, and histone agarose chromatography. The SDS-PAGE of PP2C showed one major single protein band at a position corresponding to a molecular mass of 43 kd and the purification fold was 637. The enzyme showed a pH optimum of 8 and $K_M$ value was $1.9\;{\mu}M$. However, when the substrate was changed to $[^{32}P]histone$, the pH optimum was shifted to 7 and $K_M$ value was $2.3\;{\mu}M.\;Mg^{2+}$ was essential to the enzyme activity and okadaic acid did not exert any inhibitory effect on the enzyme. To examine residue in the active site of PP2C effects of some protein-modifying reagents were tested.

• 한국소음진동공학회논문집
• /
• 제19권5호
• /
• pp.482-490
• /
• 2009

In this paper, the author proposes a new method for acoustic radiation optimum design to minimize noise from a vibrating panel-like structure using a collaborative population-based search method called the particle swarm optimization algorithm(PSOA). The PSOA is a parallel evolutionary computation technique initially developed by Kennedy and Eberhart. The acoustic radiation optimization method based on the PSOA consists of two processes. In the first process, the acoustic radiation analysis by an integrated p-version FEM/BEM, which was developed by using MATLAB, is performed to evaluate the exterior acoustic radiation field of the panel. The second process is to search the optimum design variables: 1) Shape of Bezier curves and 2) Shape and position of ribs, to minimize noise from the panel using the PSOA. The optimization method based on the PSOA is compared to that based on the steady state genetic algorithm(SSGA) in order to verify the effectiveness and validity of the optimal solution by PSOA. Finally, it is shown that the optimal designs of the panel obtained by using the PSOA can achieve effective reductions in radiated sound power.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.28-36
• /
• 1998

This investigation is the result of a structural analysis by the finite element method and static loading test for the optimal structural design of an electric railway vehicle made of stainless 301L materials. We analyzed the stress and displacement of the existing electric car-body structure for predicting the position of concentrated stress, the flow of stress, rigidity to be occurred in the car-body structure when it is subjected to the vertical load. It was exposed that the side sills and window corners around the bolsters are the weak parts of the electric car-body structure because the bolsters of the electric car-body structure were subjected to the vertical load and dynamic load to be occurred during running. The flow of stress and the cause of stress concentration in the weak zone were studied in order to prevent the concentration of stress and buckling. The rearrangement of the structure and the selection of the beam elements were also carried out for optimum design of the structure.

• BMB Reports
• /
• 제28권5호
• /
• pp.451-457
• /
• 1995

Four carboxypeptidases, CP1, CP2, CP3, and CP4 were isolated from the cotyledons of germinating seedlings of Canavalia lineata by sequential chromatography on the following four columns: 1) CM-cellulose, 2) Sephacryl 5-300, 3) Procion red dye, and 4) Sephacryl S-200. A number of properties of the enzymes, such as substrate specificity, molecular weight, optimum pH, thermal stability, have been determined. Enzyme activities were measured using the Cbz(carbobenzoxy)-dipeptides containing phenylalanine at the penultimate position. The $K_m$ values of four carboxypeptidases for Cbz-Phe-Ala were 0.50, 0.65, 1.30, and 1.35 mM, respectively. The inhibition studies indicated that the four carboxypeptidases were all serine type. Each of the carboxypeptidases with molecular weights of 145, 114, 105, and 104 kDa, respectively, had the optimum enzyme activity at pH 5.0~6.0. And they were sensitive to high temperature.