• 한국염색가공학회지
• /
• 제25권2호
• /
• pp.110-117
• /
• 2013

The purpose of this study is to fabricate the flame retardant polyester fabric by thermal bonding with low melting component of flame retardant bicomponent filament(LMFRPC) and to describe the characteristics of thermal bonded fabrics. The fabrics were prepared with flame retardant polyester filaments(FRP) as warp and blended filaments of FRP and LMFRPC as weft. The LMFRPC have a sheath and a core wherein the core comprises a flame retardant polyester and the sheath comprises a thermoplastic polyester of low-melting point. In this study, we investigated the physical properties, melting behavior of filament, the effect of the component of FRP and LMFRPC on the thermal bonding, mechanical properties. Melting peak of LMFRPC showed the double melting peak. The thermal bonding of the fabric formed at lower melting peak temperature of bicomponent filament of LMFRPC. The optimum thermal bonding conditions for fabrics was applied at about $170^{\circ}C$ for 60 seconds by pin tenter. On the other hand, the tensile strength, elongation, and LOI of the fabric increased with an increasing component of FRP of weft.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권4호
• /
• pp.20-23
• /
• 2012

Superconducting equipment has been actively investigated for securing the environment and energy technology (ET) in various parts of the world. Despite these movements, a high voltage cryogenic bushing, which plays an important role of interconnection between the electric power systems and superconducting devices, has not been fully developed due to severe insulation requirements. A gas insulated cryogenic bushing has been investigated as one of our projects since 2010. As a basic step to obtain the design parameters for cryogenic bushing, we focused on the surface flashover characteristics of glass fiber reinforced plastic (FRP) in several insulation gases. For the surface flashover tests, several insulation gases including $SF_6$, $CF_4$ and $N_2$ gas were prepared. Various length of FRP specimens were fabricated in order to obtain the fundamental data for creepage distance of FRP. The first specimen group was from 2 mm to 10 mm with 2 mm intervals and the second specimen group was from 20 mm to 100 mm with 20 mm intervals. And the gas pressure was varied from 1 bar to 4 bar. An AC overvoltage test and a lightning impulse test were performed. Then the experimental results of surface flashover were obtained and analyzed. Based on these results, it would be possible to design the optimum creepage distance of FRP in a cryogenic bushing.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.157-168
• /
• 2006

Recently, interest in using Al alloys in ship construction instead of fiber-reinforced plastic (FRP) has increased because of the advantages of A) alloy ships over FRP ships, including high speed, increased load capacity. and ease of recycling. This paper investigated the mechanical and electrochemical properties of Al alloys in a slow strain rate test under various potential conditions. These results will provide reference data for ship design by determining the optimum protection potential regarding hydrogen embrittlement and stress corrosion cracking. In general, Al and Al alloys do not corrode on formation of a film that has resistance to corrosion in neutral solutions. In seawater, however, $Cl^-$ ions lead to the formation and destruction of a Passive film. In a potentiostatic experiment. the current density after 1200 sec in the Potential range of $-0.68\~-1.5\;V$ was low. This low current density indicates the protection potential range. Elongation at an applied potential of 0 V was high in this SSRT. However, corrosion protection under these conditions is impossible because the mechanical properties are worse owing to decreased strength resulting from the active dissolution reaction in parallel parts of the specimen. A film composed of $CaCO_3\;and\;Mg(OH)_2$ confers corrosion resistance. However, at potentials below -1.6 V forms non-uniform electrodeposition coating, since there is too little time to form a coating. Therefore, we concluded that the mechanical properties are poor because the effect of hydrogen gas generation exceeds that of electrodeposition. Comparison of the maximum tensile strength, elongation, and time to fracture indicated that the optimum protection potential range was from -1.45 to -0.9 V (SSCE).

• 한국해양공학회지
• /
• 제33권6호
• /
• pp.495-503
• /
• 2019

Approximately 90,000 ships are registered in South Korea, and about 80,000 of these ships are used in domestic shipping. Among these, 84% are small ships, such as a fishing vessels that weigh less than 20 tons and are made mostly of an FRP (Fiber Reinforced Plastics). When this fact is taken into account, the greenhouse gas emissions that are released per ton of a composite vessel are sizeable. In this study, the laminated structures of an FRP fishing vessel, many of which currently are being built in Korea, were analyzed by ISO (International Organization for Standardization) and international design rules, and the structures of the hulls are lightweight with optimum glass fiber mass content as determined by the laminate weight minimization algorithm. As a result, it was confirmed that the laminations of the vessels in accordance with the Korean rule could have 6.4% to approximately 11% more design margin compared to the requirements of ISO and other international rules. And the case study of the application of the laminate weight minimization algorithm showed the possibility of reducing the weight of the hull bottom plating by as much as about 19.32% and by as much as about 18.06% in the overall structure.

• Composites Research
• /
• 제17권2호
• /
• pp.1-8
• /
• 2004

본 논문은 겹판 스프링의 정적 스프링 상수를 가지고 복합재료 데이퍼 스프링을 최적설계 하였다. 두께와 폭을 설계변수로 실정하였다. 회귀모형의 목적함수는 상용 해석 프로그램을 통해 얻었다. 회귀모형의 함수를 가지고 회귀계수를 계산한 후, DOT를 이용하여 최적해를 구하였다. 설계에 이용된 복합재료로는 E-glass/epoxy와 carbon/epoxy를 선정하였고 겹판 스프링과 비교 해석하였다. 그 결과 정적 스프링 상수는 최적화된 복합재료 스프링들과 겹판 스프링이 1％내로 일치함을 보였다.

• 콘크리트학회논문집
• /
• 제14권2호
• /
• pp.190-198
• /
• 2002

본 연구에서는 폐 FRP(fiber reinforced plastics) 미분말을 잔골재 대용으로 치환한 폴리머 시멘트 모르타르의 물성을 조사하였다. 폴리머 혼화제로는 Styrene-Butadiene Rubber(SBR) 라텍스, Polyacrylic Ester(PAE) 에멀젼 및 Ethylene-Vinyl Acetate(EVA) 에멀젼을 사용하였다. 폐FRP 미분말의 치환율을 5~30 wt%, 폴리머 혼화제의 첨가량을 폴리머 시멘트비 5~20 wt%로 변화시켜 공시체를 제작하였다. 굳지 않은 폴리머 시멘트 모르타르의 물성, 경화 공시체의 흡수율, 내열수성 및 양생방법 에 따른 압축 및 휨강도를 측정하였다. 폐FRP 미분말을 치환ㆍ첨가한 폴리머 시멘트 모르타르의 압축 및 휨강도는 폐FRP 미분말의 치환량이 증가할수록 감소되었고, 폴리머 시멘트비가 증가할수록 증가되었다. 폴리머 혼화제로서 SBR 라텍스를 사용한 폴리머 시멘트 모르타르의 강도특성이 가장 우수하였고, 폴리머 시멘트 모르타르의 적정한 폴리머 시멘트비는 20wt%이었고, 폐FRP 미분말의 적정 치환량은 20wt%로 나타났다. 또한 폴리머 시멘트 모르타르는 가열양생에 의해 강도발현이 촉진되었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권3호
• /
• pp.122-126
• /
• 2006

In this study, composite materials were put to dry interfacial treatment by use of plasma technology It has been presented that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 Torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. The decrease in surface potential of charged samples by corona discharge indicates that the amount of accumulated electrical charges reduces and the charges that have been injected lessen rapidly when the duration of UV irradiation increases. The surface resistivity and the tensile strength of plasma treated samples, a longer UV irradiation time resulted in decreased insulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1544-1546
• /
• 2003

In this study, composite materials were put to dry interfacial treatment by use of plasma technology. It has been presented that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 torr of system Pressure, 100 W of discharge power, and 3 minutes of discharge time. The decrease in surface potential of charged samples by corona discharge indicates that the amount of accumulated electrical charges reduces and the charges that have been injected lessen rapidly when the duration of UV irradiation increases. The surface resistivity and the tensile strength of plasma treated samples, a longer UV irradiation time resulted in decreased insulation.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.76-81
• /
• 1997

In the past polyester was usually used as the matrix of all fiber-reinforced plastic (FRP). Nowadays, however, epoxy resin has taken the place of polyester due to its superior properties. If the cutting properties of epoxy resin are unknown, It is difficult to find the optimum cutting conditions of all fiber-reinforced plastic such as CFRP. AFRP. GFRP. In this paper, I will study the cutting properties of epoxy resin by testing surface roughness.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.309-316
• /
• 1999

Laminated composite plates are very useful in various fields of engineering where high strength-to-weight and stiffness-to-weight ratios are required. Design optimization of composite structures has gained importance in recent years as the engineering applications of fiber reinforced materials have increased and weight savings has become an essential design objective. However, due to the anisotropic material properties of laminated composite structure it is very difficult to analyze and design. In this study, numerical optimization technique together with the finite element method is used to find the optimum design of FRP. Various combination of fiber orientation for the laminate layers are investigated and several local optimum solutions are found.