• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.241-241
• /
• 2007

We fabricated SmBCO coated conductors(CCs) on IBAD-MgO templates using co-evaporation method. IBAD-MgO templates consist of PLD-LMO/epi-MgO/IBAD-MgO/Ni-alloy and showed good in-plane texture of below FWHM 7 degree. Evaporation rates of Sm, Ba, and Cu were precisely controlled to get the optimum composition ratio after deposition process. To optimize the oxygen partial pressure of reaction region, wide range of the partial pressure was investigated from 1 mTorr to 15 mTorr. By reducing the oxygen partial pressure to 5mTorr, (103)grains in SmBCO layer have been increased. On the other hand, there were only (001)grains in SmBCO layer deposited at 15 mTorr $O_2$. Deposition temperature was also investigated from $600^{\circ}C\;to\;800^{\circ}C$ to make high Ic SmBCO CCs. SmBCO on IBAD MgO template showed that the Ic increased gradually at higher growth temperature to $800^{\circ}C$, which the highest Jc and Ic is $2.6\;MA/cm^2$ and 500 A/cm-w., respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.73-81
• /
• 2004

To develope of the inexpensive anti-stain chemicals, it was conducted to investigate the inhibitory effectiveness of mycelial growth and anti-mold effectiveness against test fungi causing surface mold of wood, iron corrosivity and hygroscopicity of six fluoride-based chemicals made from industrial by- product.Among the six chemicals. RNF-3 and RNF-4 were the most effective with respect to a mycelial growth control and anti-mold effectiveness. For the wood treatment with these chemicals, the optimum concentration was about 2% and there was no difference in the effectiveness of chemicals between wood species. The wood treated with synthesized chemicals showed a relatively high iron corrosion rate for corrosive F component whereas, in the treatment with RNF-3 and RNF-4, there was no difference from the untreated wood when the concentration was less than 2%. The hygroscopic property of wood was not effected by treatment of these chemicals. To prove the feasibility for practical using of RNF-3 and RNF-4 chemicals, it is necessary to test of anti-mold effectiveness in the sawmill by field test.

• Journal of the Korean Magnetics Society
• /
• v.12 no.5
• /
• pp.189-194
• /
• 2002

Microstructure and magnetic properties of Sm-Co sintered magnet were investigated with the variation of Zr content and their solution treatment and aging temperatures. The fraction of eutectic structure and the size of eutectic area decreased with increasing x value of cast Sm(C $O_{.688-x}$F $e_{.242}$C $u_{.07}$Z $r_{x}$)$_{7.404}$ alloys. On the other hand, x=0.022 ingot had finer dendritic structure compared to the other alloys. The sintered magnet of Sm(C $O_{.688-x}$F $e_{.242}$C $u_{.07}$Z $r_{x}$)$_{7.404}$ had well defined cell structure which is composed of cell boundary Sm $Co_{5}$ and cell interior S $m_2$Co/ssub 17/ phase. Cell boundary Sm $Co_{5}$ phase has 20nm thickness and its relative angle was 120$^{\circ}$ in x=0.018 and 0.022 alloys. Cell size was decreased with increasing Zr contents. But, x=0.026 alloy has diffuse cell boundary and irregular shape compared to x=0.022 and 0.018 alloys. Maximum value of coercive force and maximum energy Product were obtained from x=0.022 alloys. Optimum solution treatment temperature of Sm(C $O_{.688-x}$F $e_{.242}$C $u_{.07}$Z $r_{x}$)$_{7.404}$ alloy was 1170 $^{\circ}C$ and 1st aging temperature of two step aging process for higher coercivity was 850 $^{\circ}C$.

• Applied Biological Chemistry
• /
• v.24 no.4
• /
• pp.260-266
• /
• 1981

Some properties of cellulase and xylanase produced from Pleurotus ostreatus 301 and Lentinus edodes 3-1 during its growth in rice straw medium were investigated. The cellulase activities of P. ostreatus 301 and L. edodes 3-1 were increased in proportion to substrate concentration within 0.6% and 0.8%, respectively, and xylanase activities of two strains were increased within 1%. The reducing sugar production of cellulase and xylanase in two strains were proportionaly increased until 30 min. and 60 min. respectively. The opium pH for cellulase activities of P. ostreatus 301 and L. edodes 3-1 were pH 4.0 and pH 4.5, respectively, and xylanase activities of two strains were pH 5.0. The stable pH range for cellulase activities of P. ostreatus 301 was within 4.0 to 6.0 and L. edodes 3-1 was within 3.0 to 5.0, Xylanase activities of P. ostreatus 301 was within 4.5 to 6.0 and L. edodes 3-1 was within 3.5 to 6.0. The optium temperature for cellulase activities of P. ostraeatus 301 and L. edodes 3-1 were $40^{\circ}C$ and $50^{\circ}C$, respectively, but xylanase activities of P. ostreatus 301 and L. edodes 3-1 were $50^{\circ}C$ and $45^{\circ}C$, respectively. Thermal stability of enzymes were below of optimum temperature and these were mostly inactivate at $70^{\circ}C$ for 10 min of the metalic ions tested, cellulase activities of L. edodes 3-1 was increased by $Co^{++},\; Mg^{++}$ at the concentration of $10^{-2}M$, but were greatly inhibited by $Hg^{++},\;Cu^{++}$ in two strains. Xylanase activities were increased by $Ca^{++},\;Co^{++},\;Mg^{++}$ and $Cd^{++}$ but was greatly inhibited by $Hg^{++}$.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.3
• /
• pp.434-441
• /
• 2011

In this study, certain quality characteristics of kimbugak samples prepared with 2 different puffing methods, microwave oven and frying, and containing different levels of sea tangle powder(0, 2, 4, and 6%), were examined according to mineral content, moisture content, color values, photographic images, hardness and sensory evaluations. The mineral contents of Porphyra yezoensis were: K, 2,612.400 mg; Ca, 116.970 mg; Na, 486.099 mg; Mg, 297.800 mg; Fe, 9.636 mg; Mn, 1.614 mg; and Cu, 0.973 mg. And those of the sea tangle powder were: K, 5,115.000 mg; Na, 1,848.931 mg; Ca, 763.030 mg; Mg, 525.700 mg; Fe, 15.125 mg; Zn, 4.639 mg; and Mn, 0.146 mg. Moisture content was not significantly different among the samples of kimbugak puffed by the microwave oven and frying. For the color of the kimbugak made with the microwave oven or frying, L values decreased as the level of sea tangle powder increased. Color a and b values were lowest in the control group. The color values(L, a, and b) of the kimbugak puffed by frying were higher than those made using the microwave oven. The hardness of the kimbugak samples puffed using the microwave oven were not significantly different according to levels of sea tangle powder, and in the kimbugak puffed by frying, the lowest hardness was in the sample with 6% sea tangle. In sensory evaluations, color and crispness were not significantly different among the samples. The flavor scores of the 4% and 6% samples puffed by frying were higher than those of the kimbugak samples puffed using the microwave oven. The overall acceptability of the kimbugak puffed by frying and containing 6% sea tangle powder was the highest. In conclusion, 4 and 6% sea tangle powder would be considered optimum amounts for kimbugak puffed by frying.

• Analytical Science and Technology
• /
• v.9 no.4
• /
• pp.336-344
• /
• 1996

The extraction of trace cobalt, copper, nickel, cadmium, lead and zinc in urine samples of organic and alkali metal matrix into chloroform by the complex with a dithizone was studied for graphite furnace AAS determination. Various experimental conditions such as the pretreatment of urine, the pH of sample solution, and dithizone concentration in a solvent were optimized for the effective extraction, and some essential conditions were also studied for the back-extraction and digestion as well. All organic materials in 100 mL urine were destructed by the digestion with conc. $HNO_3$ 30 mL and 30% $H_2O_2$ 50 mL. Here, $H_2O_2$ was added dropwise with each 5.0 mL, serially. Analytes were extracted into 15.0 mL chloroform of 0.1% dithizone from the digested urine at pH 8.0 by shaking for 90 minutes. The pH was adjusted with a commercial buffer solution. Among analytes, cadmium, lead and zinc were back-extracted to 10.00 mL of 0.2 M $HNO_3$ from the solvent for the determination, and after the organic solvent was evaporated, others were dissolved with $HNO_3-H_2O_2$ and diluted to 10.00 mL with a deionized water. Synthetic digested urines were used to obtain optimum conditions and to plot calibration-eurves. Average recoveries of 77 to 109% for each element were obtained in sample solutions in which given amounts of analytes were added, and detection limits were Cd 0.09, Pb 0.59, Zn 0.18, Co 0.24, Cu 1.3 and Ni 1.7 ng/mL, respectively. It was concluded that this method could be applied for the determination of heavy elements in urine samples without any interferences of organic materials and major alkaline elements.

• Journal of Environmental Impact Assessment
• /
• v.29 no.3
• /
• pp.157-181
• /
• 2020

Sediments from rivers, lakes and marine ports serve as end points for pollutants discharged into the water, and at the same time serve as sources of pollutants that are continuously released into the water. Until now, the contaminated sediments have been landfilled or dumped at sea. Landfilling, however, was expensive and dumping at sea was completely banned due to the London Convention. Therefore, this study applied contaminated sedimentation soil of 'Royal Palace Livestock Complex' as soil purification method. Soil remediation methods were applied to pretreatment, composting, soil washing, electrokinetics, and thermal desorption by selecting overseas application cases and domestically applicable application technologies. As a result of surveying the site for pollutant characteristics, Disolved Oxigen (DO), Suspended Solid (SS), Chemical Oxygen Demand (COD), Total Nitrogen (TN), and Total Phosphorus (TP) exceeded the discharged water quality standard, and especially SS, COD, TN, and TP exceeded the standard several tens to several hundred times. Soil showed high concentrations of copper and zinc, which promote the growth of pig feed, and cadmium exceeded 1 standard of Soil Environment Conservation Act. In the pretreatment technology, hydrocyclone was used for particle size separation, and the fine soil was separated by more than 80%. Composting was performed on organic and Total Petroleum Hydrocarbon (TPH) contaminated soils. TPH was treated within the standard of concern, and E. coli was analyzed to be high in organic matter, and the fertilizer specification was satisfied by applying the optimum composting conditions at 70℃, but the organic matter content was lower than the fertilizer specification. As a result of continuous washing test, Cd has 5 levels of residual material in fine soil. Cu and Zn were mostly composed of ion exchange properties (stage 1), carbonates (stage 2), and iron / manganese oxides (stage 3), which facilitate easy separation of contamination. As a result of applying acid dissolution and multi-stage washing step by step, hydrochloric acid, 1.0M, 1: 3, 200rpm, 60min was analyzed as the optimal washing factor. Most of the contaminated sediments were found to satisfy the Soil Environmental Conservation Act's standards. Therefore, as a result of the applicability test of this study, soil with high heavy metal contamination was used as aggregate by applying soil cleaning after pre-treatment. It was possible to verify that it was efficient to use organic and oil-contaminated soil as compost Maturity after exterminating contaminants and E. coli by applying composting.

• Journal of Mushroom
• /
• v.11 no.4
• /
• pp.219-225
• /
• 2013

This study was carried out to investigated optimum mixing ratio of Korean natural Juglans mandshurica using as functional plants. Total nitrogen and carbon source of J. mandshurica was 0.21% and 46.0%, respectively and C/N ratio was 219. Total nitrogen source and pH of substrate mixed with J. mandshurica was 2.3~2.9 and 5.0, respectively. The contents of CaO, MgO and $Na_2O$ at J. mandshurica media were higher at harvest media than inoculation media. Mycelial growth was the fastest at J. mandshurica 20%, and slower by increase of J. mandshurica substrate. Yields of fruiting body show the highest to 163 g/850 mL of medium which are addition 10% of J. mandshurica sawdust, and diameter and thick of pileus were the highest, too. The L value of pileus and stipes were increased by increase of J. mandshurica substrate, but there was no significant difference in the a-value and the b-value. The contents of $P_2O_5$ and $K_2O$ of fruiting body were increased at J. mandshurica substrate, but there was no significant difference in contents of CaO, MgO and $Na_2O$. The contents of Cu of fruiting body was decreased by increase of J. mandshurica substrate, but Fe, Mn and Zn were increased.

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.625-634
• /
• 2004

The objective of this experiment is to study the possibility of lactate dehydrogenase(LDH) enzyme to prevent lactate accumulation in the rumen, For understanding capacity of bacterial LDH in rumen environments, this study was conducted to explore the effects of temperature, pH, VFAs and metal ions on Lactobacillus sp. FFy111-1's LDH activity, and the LDH activation in rumen fluid accumulated lactate. The optimum pH and temperature of LDH were pH 7.5 and 40$^{\circ}C$, respectively. The LDH activity had a good thennostability at range from 30 to 50$^{\circ}C$. The highest pH stability of the enzyme was at ranges from pH 7.0 to 8.0 and the enzyme activities showed above 64% level of non-treated one at pH 6.0 and 6.5. The LDH was inactivated by VFAs treatments but was enhanced by metal ion treatments without NaCl and $CuSO_4$ Especially, the LDH activity was increased to 127% and 124% of its original activity by 2 mM of $BaCl_2$ and $MnSO_4$, addition, respectively. When the acidic rumen fluid was treated by LDH enzyme of Lactobacillus sp. FFy111-1, the lactate concentration in the rumen fluid was lower compared with non-treated rumen fluid(P<0.05). This lactate reduction was resulted from an action of LDH. It was proved by result of purified D,L-LDH addition that showed the lowest lactate concentration among the treatments(P<0.05). Although further investigation of microbial LDH and ruminal lactate is needed, these findings suggest that the bacterial LDH has the potential capability to decrease the lactate accumulated in an acidic rumen fluid. Also, screening of super LDH producing bacteria and technical development for improving enzyme activity in rumen environment are essential keys for practical application.

• Journal of Animal Environmental Science
• /
• v.17 no.1
• /
• pp.11-22
• /
• 2011

This work was carried out to investigate the quantity of manure excreta and characteristics in growth and production phase of Holstein dairy cattle. The average manure production of dairy cattle under condition of ad libitum feeding was 41.5 kg/head/day (feces 24.9, urine 16.4 kg). The average moisture contents of feces and urine were 85.0% and 93.9%, respectively. Water pollutant concentration, $BOD_5$, $COD_{Mn}$ and SS excreted from dairy cattle were 15,444 mg/${\ell}$, 53,159 mg/${\ell}$, and 40,528 mg/${\ell}$ in feces and 8,454 mg/${\ell}$1,116 mg/${\ell}$, and 962 mg/${\ell}$in urine, respectively. And The daily loading amount of $BOD_5$, $COD_{Mn}$, SS in dairy cattle manure were 523 g, 1,416 g and 1,025 g, respectively. N, P and K contents of manure produced by dairy cattle were 0.33, 0.49 and 0.20% in feces, and 1.02, 0.27 and 1.03 in urine, respectively. In the concentrations of mineral and heavy metal of manure, Ca, Na and Mg contents were 1.56, 0.24 and 0.69%, and Zn, Cu, Cr, Pb and As were 69.23, 19.14, 2.89, 7.73 and 2.94 ppm, respectively. In conclusion, Dairy farms can be estimated optimum nutrient and pollutant balance to effectively manage the manure produced.