• 한국초전도ㆍ저온공학회논문지
• /
• 제15권4호
• /
• pp.53-58
• /
• 2013

KSTAR in-vessel cryo-pump has been installed in the vacuum vessel top and bottom side with up-down symmetry for the better plasma density control in the D-shape H-mode. The cryogenic helium lines of the in-vessel cryo-pump are located at the vertical positions from the vacuum vessel torus center 2,000 mm. The inductive electrical potential has been optimized to reduce risk of electrical breakdown during plasma disruption. In-vessel cryo-pump consists of three parts of coaxial circular shape components; cryo-panel, thermal shield and particle shield. The cryo-panel is cooled down to below 4.5 K. The cryo-panel and thermal shields were made by Inconel 625 tube for higher mechanical strength. The thermal shields and their cooling tubes were annealed in air environment to improve the thermal radiation emissivity on the surface. Surface of cryo-panel was electro-polished to minimize the thermal radiation heat load. The in-vessel cryo-pump was pre-assembled on a test bed in 180 degree segment base. The leak test was carried out after the thermal shock between room temperature to $LN_2$ one before installing them into vacuum vessel. Two segments were welded together in the vacuum vessel and final leak test was performed after the thermal shock. Commissioning of the in-vessel cryo-pump was carried out using a temporary liquid helium supply system.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.555-561
• /
• 2023

In this study, we proposed a standard model for the design, construction and demonstration of the technology development and substantiation of small hydrogen powered vessel in order to respond to the alternative fuel-using vessel market that requires the use of low-carbon/carbon-free fuel as a greenhouse gas reduction measure. The hydrogen fuel cell-based electric propulsion system developed through this is optimized through performance and durability tests on the land-based test site (LBTS), and the electric propulsion system applied to this result is mounted on a small hydrogen propulsion vessel and operated. Simultaneously, through the digital twin technology between the LBTS and the hydrogen-propelled vessel on the sea, the technology that can predict and diagnose the problems that can occur in the electric propulsion system of the vessel is applied to carry out the empirical study of the hydrogen-propelled vessel. In addition, we propose a commercialization model by analyzing the economic feasibility of the demonstration vessel.

• 한국가스학회지
• /
• 제8권4호
• /
• pp.30-35
• /
• 2004

본 논문은 다구찌 실험 설계법을 이용하여 압력용기의 메탈시일 구조물에 대한 해석을 수행하였다. 다구찌 설계방법은 압력용기의 밀봉을 위한 캔티레버 타입 밀봉장치 구조물에 대한 설계 파라메터를 최적화 하는데 대단히 유용하다. 다구찌 기법으로 수행된 해석결과에 따르면, 최적화 설계 치수는 단지 16번의 반복 실험법에 의해 파라메터 치수를 최적의 조건으로 얻을 수 있다는 측면에서 간편한 설계도구이다. 이것은 다구찌 설계 실험법이 곡선면을 갖는 구조물의 최적화 설계에서 대단히 유용하다는 것을 의미한다. 다구찌 설계기법에 기초한 해석결과를 보면, 메탈시일 구조물의 에지부에 대한 최적화 치수와 경사각도는 $d_1=50mm,\;d_2=60mm,\;a_1=20^{\circ},\;a_2=8^{\circ},\;a_3=5^{\circ}$으로 각각 요약될 수 있다.

• 한국정보통신학회논문지
• /
• 제22권3호
• /
• pp.480-490
• /
• 2018

최근, 유럽 연합 가입국을 기항지로 항해하는 선박을 대상으로 배출 가스를 측정한 후, 그 결과를 보고하고 검증받는 MRV 규제의 시행을 앞두고 있다. 이러한 배출 가스량을 경험적으로 산정해보기 위하여 본 논문에서는 간이 연료 소모량 추정 및 최적 경유 항구 추천 시스템을 개발하기 위한 내용을 다룬다. 이를 위해 10여 년간 축적된 선박의 항차 데이터를 기반으로 각 항구별 연료 소모량, 거리, 소요 시간을 분석하여, 이를 기반으로 연료 소모량을 추정하는 모듈을 개발하였다. 또한 선박의 출발지와 목적지 사이의 최적 경유 항구를 추천하기 위한 기능을 비롯하여 실제 운항 경로 표시 기능, 실제 운항 경로와 최적 경로와의 비교 기능, 사용자 지정 경유 항구 선택 기능을 제공하기 위한 모듈을 구현하였다. 개발한 시스템은 선박의 운항 계획 등을 위한 참고 지표로 활용이 가능할 것으로 기대되며, 축적된 데이터를 기반으로 학습하여 미래 데이터를 예측하기 위한 선행 연구로서 의미가 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제31권4호
• /
• pp.408-422
• /
• 1999

To reduce the fast neutron fluence which deteriorates the RPV integrity, additional shields were assumed to be installed at the outer core structures of the Kori Unit 1 reactor, and its reduction effects were examined. Full scope Monte Carlo simulation with MCNP4A code was made to estimate the fast neutron fluence at the RPV. An optimized design option was found from various choices in geometry and material for shield structure. It was expected that magnitude of fast neutron fluence would be reduced by 39% at the circumferential weld of the RPV, resulting in extension of plant lifetime by 4.6 EFPYs based on the criterion of PTS requirement It was investigated that the nuclear characteristics and thermal hydraulic factors at the internal core were only negligibly influenced by the installation of additional shield structure.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.57-62
• /
• 2005

STX shipbuilding Co,. Ltd. has been developed a hull form and propeller of medium class container vessel. The present paper deals with numerical calculations and experimental tests for the investigation of wave resistance, viscous resistance and propeller. The characteristics of wave resistance and self propulsion factors are varied in order to find an optimized hull form. The measured results have been compared with computed results by 'WAVIS' The prediction of the caviation occurrence was predicted by 'Opti-pro' and measurement is performed in KRISO.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 2003년도 추계학술발표회 논문집
• /
• pp.77-84
• /
• 2003

• 대한조선학회 특별논문집
• /
• 대한조선학회 2011년도 특별논문집
• /
• pp.55-62
• /
• 2011

Although the performance of the commercial vessel has been dramatically improved through innovations, there has been no big changes on the traditional anchoring method of commercial vessels, both on design and operation until now. In this paper, two cases of design modifications were introduced for optimized design of pocket type anchor handling, which resulted in improved performance of the vessel's anchoring. From the first time fully balanced type anchors were applied on vessels in Korean shipyard, main design problem on this application was that the anchor doesn't normally slide into the pocket when the anchor fluke is not in line with pocket, as the anchor freely rotates by the swivel on forerunner. In order to prevent the problem, swivel has been deleted on the forerunner to prevent anchor rotation until now, but this solution caused problems such as twist lock of anchor chain, restriction of windlass direction, etc. On this paper, one of the solution is introduced to overcome the design problem by tilting the hawse pipe to some extent, which makes anchor turned at the time anchor ring touches the pocket skirt and that it properly slides into the pocket. Secondly, one of the solution is introduced to overcome misalignment problem between anchor chain cable and roller of chain compressor, which has been frequently occurred, by modification of roller design.

• 대한전자공학회논문지SP
• /
• 제48권2호
• /
• pp.116-124
• /
• 2011

본 논문에서는 해양 환경의 특성을 고려하여 선박 환경에 적합한 방식으로 Server-side 방식에 따른 선박 USN 미들웨어를 구현하였다. 다중 질의 처리 모듈에서는 선박USN에 구성된 다차원 센서 스트림 데이터를 효율적으로 처리하기 위해서 최적화된 질의 계획으로 Mjoin 질의와 해쉬 테이블을 이용한 최적화 방법을 제시하고 모듈을 구성하였다. 상황 인식 관리 모듈에서는 해양의 특성을 고려하여 선박의 상황을 인식하고 관리하는 방법을 제시하였고 SVM 알고리즘을 이용하여 위험 상황을 판단하였다. 제안한 SVM 알고리즘을 이용하여 각 상황별로 5,000 건의 데이터를 입력 받아 실험한 결과 화재 상황과 선체 위험 상황에 대한 평균 정확도는 87.5%, 85.1%를 보였고, 측정 결과를 전송하여 선박 USN 모니터링 시스템을 구현하였다.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.50-55
• /
• 2015

Application of newly conceptualized Anti-Splash Devices designed for COT vent pipes were studied on a P/V valve located on the upper deck of an oil carrier vessel. Anti-Splash devices are used in the shipbuilding industry in order to avoid oil overflow and spray accidents caused by excess pressure and vacuum condition in the cargo oil tanks. These conditions are caused by the transverse and longitudinal sloshing forces that arise from ship motion during sea voyages. The main issue with existing Anti-Splash device model is flux at the outlet of the Anti-Splash Device, and so, new conceptual models for the Anti-Splash device were developed and compared to existing Anti-Splash device model using CFD analysis. Transient analysis was used to capture the flow and velocity of each model and a comparative analysis was performed between old and new-concept models. This data was used to determine the optimal design parameters in order to develop an optimized Anti-Splash Device. A Factory acceptance test was performed on the new-concept models in order to verify the performance and efficiency against their design requirements and other criterion. The final step performed was to apply the optimized Anti-Splash Device models for COT vent pipes to an actual vessel and verify performance through a seawater cargo operation during a sea voyage as per the ship owner's request. The patent for the aforementioned device was obtained by the Korean Intellectual property Office dated Dec. 18th,2014.