• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.4
• /
• pp.362-370
• /
• 2006

The purpose of this paper was to investigate the reforming characteristics and optimum operating condition of the plasmatron assisted $CH_4$ reforming reaction for the hydrogen-rich gas production. Also, in order to increase the hydrogen production and the methane conversion rate, parametric screening studies were conducted, in which there were the variations of the $CH_4$ flow ratio, $CO_2$ flow ratio, vapor flow ratio, mixing flow ratio and catalyst addition in reactor. High temperature plasma flame was generated by air and arc discharge. The air flow rate and input electric power were fixed 5.1 l/min and 6.4 kW, respectively. When the $CH_4$ flow ratio was 38.5%, the production of hydrogen was maximized and optimal methane conversion rate was 99.2%. Under these optimal conditions, the following synthesis gas concentrations were determined: $H_2$, 45.4%; CO, 6.9%; $CO_2$, 1.5%; and $C_2H_2$, 1.1%. The $H_2/CO$ ratio was 6.6, hydrogen yield was 78.8% and energy conversion rate was 63.6%.

• Journal of Korean Society of Forest Science
• /
• v.109 no.2
• /
• pp.202-210
• /
• 2020

This study investigated the optimal levels of stand density control considering the stability of Larix kaempferi stands. A stand density management diagram was developed from 259 sample plots. Based on these data, we determined an optimal level of the stand density control by identifying the relationship between the relative yield index (Ry) and height-to-diameter ratio. The estimated r-square (R²) of the stand density management diagram is 0.600. The analysis of the relationship between Ry and the slender tree incidence showed that when the stand density exceeded a certain threshold and the ratio of slender trees rapidly increased. The critical value of Ry was 0.63. The results of this study are expected to contribute to the establishment of stand management strategies that can reduce damage from natural causes, such as wind and snow, and to develop stand practice systems for the improved productivity of commercial forests.

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.58-61
• /
• 2011

This study was conducted to develop an optimal pruning method for okra production. Three pruning methods were tested including apical bud removing, one-third removing from the top of plant, and no pruning as a control with 3 kinds interval for 15 days after 2 months sowing. The growth and development of okra was better at the treatment of one-third removing of plant than the others. The number of branches was 0.7 in control, 3.7~4.0 in apical bud removing, and 3.0~6.0 in one-third removing treatment. In summary, one-third pruning of plant from the top of plant at 30 days after starting of pruning treatment, which showed the highest yield by 12,910 kg/10a.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.363-372
• /
• 1999

This experiment was carried out to estimate an optimal lime and nitrogen levels on the growth control of sheep sorrel in mountainous pastures of Taekwalyon areas. The dry matter yield of sheep sorrel was recongnized significantly differences between the N levels and lime levels, respectively. Most effective growth control of sheep sorrel showed an over the N levels of 21kg/10a under the ranges of lime levels of 200~300kg/10a per annum. The highest dry matter yield of sheep sorrel was obtained at the N level of 16kg/10a under the N level of 48kg/10a per annum. The highest growth control effect of sheep sorrel was obtained at 2nd and 4th cuts, and 1st, 2nd and 4th cuts under the ranges of lime levels of 200~300kg/10a, and the N level of 48kg/10a per annum, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.118-123
• /
• 2017

To manufacture MG-Si (Metallurgical grade silicon) for use in various industries, Acid leaching experiments were performed to remove aluminum (Al) and iron (Fe), which are the most common impurities found in the silicon raw material. The silicon raw material was reacted with five types of acids (HCl, HF, H2SO4, HNO3, H3PO4) at 1, 2, 4, and 6M; 1M HF showed the highest Al and Fe removal rates, 97.9% and 95.2%, respectively. HF, however, resulted in an 18% reduced yield due to the silicon corrosion properties. To minimize the yield reduction, 2M HCl, which has a second removal ratio result, was mixed with 1M HF and applied to the silicon raw material. The experiment was conducted to select the optimal conditions for the mixed solution, which were $80^{\circ}C$ and 2hr. Under the optimal conditions, the residual Al and Fe concentrations were 141 ppmw and 93 ppmw, respectively, and it very easy to produce MG-Si with 3N grade purity.

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.5
• /
• pp.340-346
• /
• 2003

This study was carried out to improve cultivation techniques by low cost and labour saving in ginseng (Panax ginseng C. A. Meyer) seedling production, by elucidating proper ratio virgin soil and organic fertilizer, suitable height of front piller. The obtained results are as follows ; The optimal ratio of white decomposition of virgin soil and organic fertilizer was 10:1 for good yield of standard seedling, The fittest height of front piller was 150 cm because of both good seedling growth and yield. The cost for production of seedling of ginseng could be reduced by both optimal ratio of virgin soil, organic fertilizer and selection of front piller height.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.2
• /
• pp.138-141
• /
• 2007

Good quality seedlings produced in the seedbed of Yangjik, traditional seedling cultivation, is one of the most important factors in determining the yield and quality of $4{\sim}6-year-old$ ginseng. This study was carried out to substitute Yacto, traditional organic fertilizer, for economical compost in the cultivation of seedling by fertilizing relatively little amount of compost into seedbed soil. Bulk density and solid phase were decreased in physical properties of seedbed soil, while air phase and porosity were increased by more addition of compost. When the amount of applied compost in seedbed soil was above $8{\ell}$ per Kan, the contents of nutrient were exceeded the range of optimal standard for ginseng cultivation. Chlorophyll content and stem length were increased by more addition of compost, while the length and the width of leaves showed the highest value at the application level of $8{\ell}$ per Kan. Heat injury was also increased distinctly above the application level of $8{\ell}$ per Kan. The number of first grade seedlings and usable seedlings, and fresh root weight per plant showed the peak at application level of $8{\ell}$ per Kan, respectively. Fertilizing the compost of $8{\ell}$ per Kan into seedbed soil was the optimal amount for producing the good quality seedlings.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.5
• /
• pp.369-373
• /
• 2004

In order to elucidate the possibility of artificial production of p. ferulae by solid-state culture, the optimization of culture conditions was carried out. When $NH_4H_2PO_4$ and $CaCO_3$ were used in the cultures using test tube with 30 g of Populus sawdust at $25^{\circ}C{\pm}1$ in the dark, the favored mycelial growth was observed with $1\%$ of $NH_4H_2PO_4$ and the production of polysaccharide was 7.85 mg/100 mg of mycelium with $1\%$ of $CaCO_3$. The mixtures of $80\%$ of Populus Sawdust and $20\%$ of rice bran at $60\%$ of water content were determined to be optimal for the production of fruiting bodies in the sawdust culture. When three treatments containing various ratios of garlic powder were conducted, yields of fruiting bodies were drasti[ally higher than those of Synthetic mixture without garlic powder The highest yield (143 g/bag) was obtained with $7\%$ garlic powder. The yield of synthetic mixture containing $7\%$ of garlic powder was $83\%$ higher than that of Sawdust culture. The reason why garlic powder did support growth was not clear but it is possible that garlic powder might contain effective components for the formation of fruiting body. The optimal synthetic mixture composition consisted of cotton seed $77\%$, lime $6.4\%,\;K_2HPO_4\;0.2\%,\;KH_2PO_4\;0.2\%,\;CaHPO_4\;0.2\%$, corn flour $4\%$, wheat flour $5\%$, and garlic pow-der $7\%$.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.14 no.4
• /
• pp.37-48
• /
• 2010

The seismic control effect of reinforced concrete structures with low energy dissipating capacity due to stiffness degradation is investigated through nonlinear time history analysis. The primary structure is idealized as a SDOF system of modified Takeda hysteresis rule and an elasto-perfectly-plastic nonlinear spring is added to represent a hysteretic damping device. Based on statistics of the numerical analysis, equivalent linearization techniques are evaluated, and empirical equations for response prediction are proposed. As a result, estimation of the ductility demand with proposed empirical equations is more desirable than the equivalent linearization techniques. The optimal yield strengths based on empirical equations are significantly different from the optimal yield strength of elasto-perfectly-plastic systems. Also, the results indicate that the reduction effect of the ductility demand is more remarkable for smaller natural periods.

• Journal of the Korean Chemical Society
• /
• v.23 no.3
• /
• pp.165-174
• /
• 1979

A purification technique of glucose oxidase was developed. Using the gluconyl-${\omega}$-aminohexyl Sepharose affinity chromatography, it was partially purified 14.6 folds with 79.7% yield. With the combination of the affinity chromatography and Sepharose 6B gel filtration, the enzyme was purified 27.2 folds from the broth with 74.1% yield. The final purified preparation showed 90.83 U of glucose oxidase activity per mg of protein and a single band by 7% polyacrylamide gel electrophoresis. The absorption spectrum and substrate specificity of the enzyme were studied and the fianal preparation showed the optimal pH between 5.6 and 6.0, the optimal temperature at $40^{\circ}C$, $8.5{\times}10^{-3}M$ of $K_m$ for D-glucose, and 3.43 kcal/mole of the activation energy.