• Applied Chemistry for Engineering
• /
• 제10권8호
• /
• pp.1200-1209
• /
• 1999

Prediction model was composed by optimal parameter estimation from best fitting on reactant temperature profile, inlet and outlet temperature of coolant and yield of dual fixed-bed catalytic reactor(FBCR) which was measured in the industrial field. In order to design the FBCR which could obtain maximum conversion and yield, we investigated the effect of catalyst bed length and reactor radius changes. An uniform activity FBCR showed the best performance at z = 2.8 m of total catalysst bed length in case of reactor radius r = 0.01241 m and z =2.80 m(upper layer: 1.88 m, lower layer: 0.92 m) under reactor radius r = 0.01254 m for a dual activities FCBR. In case of reactor radius changes, the axial temperature profile and maximum radial temperature was rapidly risen for radius increase. The reactor radius decrease showed the opposite result.

• Journal of the Korean Wood Science and Technology
• /
• 제41권6호
• /
• pp.497-506
• /
• 2013

The optimal condition for the torrefaction of eucalyptus (Eucalyptus globulus) was investigated by response surface methodology. The carbon content in the torrefied biomass increased with the severity factor (SF), while hydrogen and oxygen contents decreased. The calorific value of torrefied biomass ranged from 20.23 to 21.29 MJ/kg, depending on the torrefaction conditions. This implied that the energy contained in the torrefied biomass increased by 1.6 to 6.9%, when compared with that of the untreated biomass. The weight loss of biomass increased as the SF increased. The Code level of reaction temperature had the highest impact on the energy yield of torrefied biomass, while the effect of Code level of reaction time was considerably low. The highest energy yield was obtained at low SF.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1068-1073
• /
• 2010

A welding neck flange is widely used for an interconnection between pipes. It is produced by a hot forging process, and required high yield strength under the high pressure condition, like a deep-sea. Generally, to increase yield strength, a increasing of carbon content is used, however a carbon content of welding neck flange is limited to 0.47. So, in this study, a strengthening by grain refinement without changing carbon content is used to increase yield strength. Taguchi method and FEM are used for the optimization of forging process and the experiment for the yield strength of the prototype with the optimal forging process is performed for validity.

• Korean Journal of Agricultural Science
• /
• 제43권3호
• /
• pp.330-339
• /
• 2016

The effect of transplanting and harvest timing was evaluated for the production of high quality pigmented rice in the Yeongnam plain area. Rice was transplanted on June $2^{nd}$ and $14^{th}$ and harvested between 35 - 55 days after panicle heading at 5 - day intervals. Three black- and 3 red-pigmented rice cultivars (such as early cultivar : Josengheugchal, Jeogjinju; medium cultivar : Heugseol, Hongjinju; and mid-late cultivar : Sintoheugmi, Geongganghongmi) were studied. Yield components like spikelet number, ripened grain ratio, and 1,000 - grain weight of the black- and red-pigmented rice cultivars were similar for both the June 2 and June 14 transplantings but panicle number per $m^2$ was higher for the June 14 transplanting than for June 2. This contributed to a higher brown rice yield for the June 14 transplanting, by 6 - 19% for black-pigmented rice, and by 10 - 21% for red-pigmented rice than the yield for the June 2 transplanting. Total anthocyanin and polyphenol productions of the pigmented rice were also higher in the June 14 transplanting than that in the June 2 transplanting due to high brown rice yield. Based on the combined pigmented brown rice yield, we concluded that the optimal harvest timing would be 40 - 45 days after panicle heading (DAH) for the black-pigmented rice and 45 - 50 DAH for the red-pigmented rice. This study suggests that optimum transplanting and harvest timings play an important role for production of high quality pigmented rice in the Yeongnam plain area.

• Korean Journal of Soil Science and Fertilizer
• /
• 제48권1호
• /
• pp.50-56
• /
• 2015

This research was performed to test the hypothesis that the optimal fertilization rate for lettuce is various with soil moisture conditions. The experiment was conducted under a rainfall-intercepted facility in Suwon, South Korea from 2002 to 2003. Soil was irrigated at 30, 50, or 80 kPa of soil moisture tension at 15 cm soil depth in 2002 spring and fall and 20, 30, 50, or 80 kPa in 2003 spring. Fertilization was performed with four levels in spring for both years: none, 0.5, 1.0, and 1.5 times of the recommended N, P, and K fertilization rate. The irrigation amount increased with decreased irrigation starting point as soil moisture tension. The maximum yield was found at the lowest soil moisture tension in spring while irrigation at 50 kPa resulted in the greatest yield in fall. The yield responses of lettuce to fertilization rates were various with soil moisture condition. In spring, maximum yield was found at 1.0 or 1.5 times of the recommended fertilization rate at 20, 30, and 50 kPa irrigation while 0.5 or 1.0 times of fertilization rate resulted in the maximum yield in fall. Especially for 80 kPa irrigation in 2003 spring, yield was decreased by fertilization. It suggested that the optimum fertilization rate for lettuce is affected by soil moisture condition and that lower fertilization rate should be suggested when soil is managed in drier condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제13권2호
• /
• pp.45-56
• /
• 1980

Farming density of oyster cultured in Hansan-Geoje Bay was studied to obtain the optimal farming density based on the biosedimentation analysis and the annual yield data from 1970 to 1979. Farming density of oyster extrapolated by means of pollution grade of sediment is significantly correlated to COD and phaeophytin content of the bottom mud of the bay. Pollution grade is linearly related to the number of oyster clusters suspended in the unit area. Optimal farming density was $0.12\;string/m^2$ in case of raft culture, and it was $0.12\;string/m^2$ in case of long-line culture. Farming density was well expressed by the number of strings per raft and the area covered by a raft. As strings per raft increased from 350 to 558, total yield from a raft increased and when occupied sea area per raft ranged from $1.000\;m^2\;to\;6,000\;m^2$, the yield per raft linearly increased as the area increased. This analysis suggests that the optimal density be 0.11 string per unit area $(m^2)$. As increasing the number of strings per $m^2$ the yield per string decreases, and this is well dipicted by a linear function. At this time the yield per unit area increases when the number of string increases up to the density of $0.13\;strings/m^2$. From the point of these three comprehensive analyses the optimal density was $0.11\~0.13\;string/m^2$ in case of raft culture and $0.25\;strings/m^2$ in case of long-line culture in Hansan-Geoje Bay. The maximum expected yield of oyster in Hansan-Geoje Bay is approximately 5,600 tons when maintained the string density at $0.11\~0.13\;string/m^2$.

• Journal of the Korean Society of Food Culture
• /
• 제34권6호
• /
• pp.779-784
• /
• 2019

The purpose of this study was to optimize the rice protein extracted using a response surface methodology. The experiment was designed based on a CCD (Central Composite Design), and the independent variables were the high pressure (X₁, 0-400 MPa) and processing time (X₂, 0-10 minutes). The results of the extraction content (Y₁), residue content (Y₂), and recovery yield (Y₃) were fitted to a response surface methodology model (R²= 0.92, 0.92, and 0.93, respectively). Increasing the pressure and processing time has a positive effect on the extraction content (Y₁), residue content (Y₂), and recovery yield (Y₃). Therefore, these high-pressure conditions (independent variables) can significantly affect the improvement in rice protein extraction efficiency. Thus, the optimal conditions of X₁ and X₂ were 400 MPa and 10 min., respectively. Under these optimal conditions, the predicted values of Y₁, Y₂, and Y₃ were 62.93, 57.53 mg/g, and 91.76%, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제54권4호
• /
• pp.333-342
• /
• 2018

In order to manage and rebuild fishery resources, the fishing effort should be controlled effectively. Especially in the setting up of the proper level of fishing efforts, economic standards as well as biological standards must be carefully considered to promote the sustainable and economically viable development of fisheries. This study is aimed to estimate optimal fishing effort of giant octopus by combo fishing which uses longline in Gangwon with statistical data. The result showed that current fishing effort is 28% higher than $E_{MEY}$. Unit fishing cost for each voyage will be 27% lower and unit fishing profit will be 17% higher than the current situation when the fishing effort meets $E_{MEY}$. Although current fishing effort is similar to the $E_{MSY}$, current catching is 16% higher than MSY and 22% higher than MEY.

• Journal of the Korean Society of Industry Convergence
• /
• 제26권2_2호
• /
• pp.285-291
• /
• 2023

In this paper, in order to secure the safety and productivity of pine cone harvest, modeling and structural analysis of the hammering system for pine cone harvest drone that can easily access pine cone of Pinus koraiensis and collide with them to harvest them was performed. It calculate the equivalent stress for the structure of the hammering system and the yield strength of the applied material by applying the shear force of the stalk at which the pine cone is separated from the branch, and it is to verify the safety of the structure and propose an optimal design through appropriate factor of safety and design change. The shear force of the stalk at which the pine cone was separated from the branch was 468 N, and was applied to both ends of the hammering system. The yield strength of SS400 steel used in the hammering system is 245 ㎫, and the design change and structural analysis were performed so that the Von Mises stress could be less than 122.5 ㎫ by applying the factor of safety of 2.0 or more. As a result of the structural analysis of the frist modeling, the Von Mises stress was 220.3 ㎫, the factor of safety was 1.12, and the stress was concentrated in the screw fastening holes. As a result of the design change of the screw fastening holes, the Von Mises stress was 169.4 ㎫, the factor of safety was 1.45, and the stress was concentrated on the side part. As a result of the design change by changing screw fastening holes and adding ribs, the Von Mises stress was 121.6 ㎫, and the factor of safety was 2.02. The safety of the hammering system was secured with an optimal design with little change in mass. There was no deformation or damage as a result of experimenting on pine cone harvest by manufacturing the hammering system with an optimal design.

• KSBB Journal
• /
• 제14권2호
• /
• pp.205-211
• /
• 1999

We investigated optimal conditions for the microbial transformation of $\gamma$-butyrobetaine into L-carnitine by using Achromobacter cycloclast ATCC 21921. When the cells were cultivated in the medium containing $\gamma$-butyrobetaine as the sole carbon source for both cell growth and L-carnitine production, the maximum L-carnitine production was 2.9 g/L and the conversion yield from $\gamma$-butyrobetaine to L-carnitine was as low as 30.9 mol%. In order to enhance the L-carnitine production and the conversion yield, various carbon sources were added to the $\gamma$-butyronetaine containing basal medium. In the medium supplemented with glycerol, L-carnitine production was as high as 4.6 g/L and the conversion yield was 88.2 mol%, showing a significant improvement in L-carnitine synthesis compared to those in the medium without glycerol. We also examined the additional effect of quaternary ammonium compounds such as betaine and choline, which are similar in structure to $\gamma$-butyrobetaine and L-carnitien. It was observed that in the presence of those quaternary ammonium compounds, both the L-carnitine production rate and the conversion yield increased. In addition, we found that cell growth was inhibited by a $\gamma$-butyrobetaine concentration of more than 3%, while L-carnitine production was efficient at the $\gamma$-butyrobetaine concentration of 2-3%. By cultivating the cells in the optimal medium containing glycerol and choline, we obtained an L-carnitine concentration of 7.2 g/L with the conversion yield of 98.7 mol% in 4 days.