• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.946-949
• /
• 2006

This study is a trial to make a design chart of sound insulation for multiple panel. Dilatational frequency, ${\Large f}_d$ becomes a key factor for optimal design since it acts like a turning point in sound insulation performance of such panels. Hence, in tuning the ${\Large f}_d$ optimally, elastic modulus of core material and thickness of the skin panel is designated to parameters. Based on these parameter, a design chart of sound insulation for multiple panel is made. Its applicability is proved by the case study of High noise reduction panel.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.7 s.124
• /
• pp.565-571
• /
• 2007

In the process of accurate manufacture and measurement, it is necessarily required to isolate external or internal vibration due to external disturbance and internal actuators. The higher vibration isolation system gets damping around resonance, the better it is generally. This paper analyzes the performance of an existing passive air-spring for vibration isolation table by using experiment and simulation. Optimal design for a passive air spring can be obtained by tuning the size of the orifice. Also design for an active isolation system is carried out by applying PID controller and considering non-linearity of pneumatic characteristics with help of look-up table. We have developed the active vibration isolation table with the better isolation performance.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.16-21
• /
• 2000

In this paper we design a GA-fuzzy controller for position control and anti-swing at the destination point. Applied genetic algorithm is used to complement the demerit such as the difficulty of the component selection of fuzzy controller namely scaling factor membership function and control rules. lagrange equation is used to represent the motion equation of trolley and load in order to obtain mathematical modelling. Simulation results show that the proposed control technique is superior to a conventional optimal control in destination point moving and modification.

• Korean Management Science Review
• /
• v.12 no.2
• /
• pp.43-62
• /
• 1995

For a complex scheduling system like time table construction, its optimal solution, if exists, is hard to obtain. In this paper, the scheduling environment is reasonably confined as where objects have their own events competing for better slots on boards, and objects have their own board slot preferences and belong to one or more classes of the society which globally constrains them. Here, two phase method is suggested, where the first phase is human-like preference driven and the second phase is for fine tuning by considering all the factors given. Designed and implemented in our system HI-SCHED are dynamic object switching, temporal-constraint-driven intelligent backtracking, case-based revisions, object-based approach, and so on. Some satisfaction degrees are also defined to measure the usefulness of our method. In addition, look-ahead dynamic object switching is considered, and additional global constraints are introduced and processed. A simple scheme is also used to verify the usefulness of the post processing scheme.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1881-1882
• /
• 2006

표준형 원자력발전소에서는 원자로 내의 핵연료 봉으로부터 발생하는 열에너지를 열교환기인 증기발생기로 전달하는 원자로냉각재 계통이 있다. 핵연료 봉을 적절한 냉각 상태로 유지하기 위하여 원자로냉각재의 온도와 압력뿐만 아니라 체적을 제어하고 있다. 원자로냉각재 체적은 용량이 큰 반면에 제어하는 밸브의 크기는 작아서 제어 응답이 길어서 현장에서 경험적으로 튜닝하는 것은 매우 어렵다. 본 논문에서는 체적제어루프의 수학적인 모델링을 통하여 오프라인으로 최적 제어 파라미터를 찾고, 실제 적용한 결과를 보여준다. 제어루프 모델링을 위하여 일반화 프로세서 모델 식으로부터 실제 운전 데이터로 모델 파라미터를 결정하는 경험적 방법을 사용하였다. 이로부터 구한 제어 파라미터를 실제 적용한 결과, 적절한 제어 응답을 얻었으며 모델링 과정이 적절하였음을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2077-2078
• /
• 2006

This paper describes the development or a closed-loop Strapdown Attitude Reference System (SARS) algorithm integrated filtering estimator for determining attitude reference for railway and aviation system using fuzzy inference. The SARS consists of 3 single-axis rate gyms in conjunction with 2 single-axis accelerometers. For optimal values of fuzzy systems, we utilize on-line scheduling method for initial values and then use genetic algorithms for fine tuning. Implementation using experimental test data of unmanned aerial vehicle has been performed in order to verify the estimation. The proposed fuzzy inference based SARS demonstrate that more accurate performance can be achieved in comparison with conventional one. The estimation results were compared with the on-board vertical gyro as the reference standard.

• Proceedings of the KIEE Conference
• /
• 2006.10c
• /
• pp.318-320
• /
• 2006

A control valve with deadband characteristics influences on the control dynamics. A control loop with deadband component shows cyclic control results and causes the wears of mechanical parts. A valve on the important process that require nonstop operation cannot be improved during operation. In case of control loops with deadband dynamics, the optimal control parameters based on the performance only are not sure of the good operation in point of protecting the control component. To improve the control performance and control oscillation, the control parameters should be changed to meet both control qualify and protection of control components.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.1
• /
• pp.38-52
• /
• 2016

This paper describes the nonlinear dynamic motion behavior of a ship equipped with a portable dynamic positioning (DP) control system, under external forces. The waves, current, wind, and drifting forces were considered in the calculations. A self-tuning controller based on a neuro-fuzzy algorithm was used to control the rotation speed of the outboard thrusters for the optimal adjustment of the ship position and heading and for path tracking. Time-domain simulations for ship motion with six degrees of freedom with the DP system were performed using the fourth-order RungeeKutta method. The results showed that the path and heading deviations were within acceptable ranges for the control method used. The portable DP system is a practical alternative for ships lacking professional DP facilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.257-262
• /
• 1994

This paper describes an autotuning fuzzy PID controller for a position control of DC serve motor. Because ZNM(Ziegler-Nichols Method) with relay feedback has the difficulty in re-tuning the PID parameters and adaptive method has complex algorithm, a new method to overcome those problems is required. The proposed scheme determines the initial PID gains by using ZNM with relay feedback, and then re-tunes the optimal PID parameters by using fuzzy expert system whenever control conditions are changed. To show the validity of the proposed method, a position control of DC servo motor is illustrated by computer simulation and is experimented by a designed controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1056-1059
• /
• 1996

In this paper, we analyzed the effect of the change of the rotor time constant on the performance of the indirect vector control system. By employing indirect field orientation technique, we have also suggested an optimal control algorithm that allows an induction motor to maintain the maximum torque under the changing environment of rotor time constant. A computer simulation on the transient response of the output torque was demonstrated. To verify the validity of the method that has been proposed in this paper, an experiment has been performed utilizing TMS32OC31(40MHz) DSP chip which is capable of performing floating-point arithmetic in real time.