• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(2)
• /
• pp.944-948
• /
• 2004

This paper presents a simple torque estimation method and switching angle control of Switched Reluctance Motor (SRM) using Neural Network (NN). SRM has gaining much interest as industrial applications due to the simple structure and high efficiency. Adaptive switching angle control is essential for the optimal driving of SRM because of the driving characteristic varies with the load and speed. The proper switching angle which can increase the efficiency was investigated in this paper. NN was adapted to regulate the switching angle and nonlinear inductance modelling. Experimental result shows the validity of the switching angle controller.

• 한국인터넷방송통신학회논문지
• /
• 제23권4호
• /
• pp.143-148
• /
• 2023

SRM의 특성 중 비선형성으로 인해 최대토크 및 최소 토크 맥동 형성을 위한 적정 운전이 어렵다. 또한 고정 스위칭각 제어 때 속도 가변에 따른 토크 형성이 불안정하여 효율을 저하시키는 문제점을 가지고 있다. 따라서 속도 가변에 따른 능동적인 스위칭각 제어가 필요하다. 본 논문에서는 SRM의 비선형성으로 인한 문제점으로부터 선행각 (Advance angle)의 자동제어에 의한 토크 리플 저감과 이에 따른 출력 토크 향상에 의한 구동 성능개선을 위한 방법에 대해 모색하였다. 또한 히스테리시스 전류제어기 성능에 따른 스위칭 가변으로 인한 SRM의 최적 운전에 대해 살펴보았다.

• 한국군사과학기술학회지
• /
• 제1권1호
• /
• pp.211-218
• /
• 1998

As a part of trajectory modulation to increase system survivability and terminal effectiveness, impact angle control is required in the terminal phase of tactical missile systems. The missile systems are not allowed to have high altitude to reduce probability of detection by sensors of missile defense systems. In this paper, an analytic form of a time-optimal control law is suggested in the case of constrained missile maneuverability and impact angle under the assumption of a zero-lag autopilot. The control law is obtained by establishing optimal missile-target engagement geometry in the vertical plane. Extension of the law for missiles with autopilot response lags requiring a numerical solution is studied by introducing an iterative algorithm for optimal switching time determination of which the initial switching instants are obtained from the analytic solution. Also suggested is a closed-form impact angle control law derived by an energy-optimal approach. The performances of the proposed guidance laws are evaluated by a series of computer runs.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.33-37
• /
• 2002

This paper presents a simple torque estimation method and the switching angle control of SRM using Neural Network. SRM has gaining much interest as industrial applications due to the simple structure and high efficiency. Adaptive switching angle control is essential for the optimal driving of a SRM because of the driving characteristic varies with the load and speed. The proper switching angle which can increase the efficiency was investigated in this paper Neural Network was adapted to regulate the switching angle and nonlinear inductance modelling. Experimental result shows the validity of the switching angle controller.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제11B권4호
• /
• pp.156-163
• /
• 2001

In this paper an optimal switching angle control of a switched reluctance motor (SRM) drive system is investigated for achieving maximum energy conversion ratio. A new magnetizing method is proposed with a low switching frequency. The proposed algorithm maximizes the positive energy conversion region, which is directly related to the mechanical output, and reduces the reactive power region with the same field energy region. As a consequence, a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing method. Experimental results show that the proposed scheme provides a high efficiency and a low ripple drive.

• 전력전자학회논문지
• /
• 제15권3호
• /
• pp.252-258
• /
• 2010

레졸버에 의한 속도 측정과 PWM 신호 발생을 하나의 마이크로콘트롤러를 이용하여 동시에 구현하면 시스템 비용을 줄일수 있을 뿐만 아니라 인버터의 스위칭 노이즈를 회피하는 것이 용이하다. 스위칭 노이즈를 회피하면서 동시에 속도측정 정밀도를 높이기 위하여 PWM 스위칭과 레졸버 신호의 A/D 변환 시점이 동기되어야 한다. 본 연구에서는 레졸버 여자신호의 위상을 단계적으로 변화시키면서 레졸버 출력신호를 측정하고, 측정된 데이터로부터 최소자승근사법을 이용하여 레졸버 여자신호의 최적 위상을 추정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.518-521
• /
• 2004

We have investigated about compensation film to reduce the light leakage at an oblique angle in-plane switching mode. It is well known that uncompensated in-plane switching (US) and fringe field switching (FFS) liquid crystal displays (LCDs) have much better viewing angle than other modes owing to the in-plane rotation of the LC director. However, to accomplish optimal viewing angle characteristics in these devices, they must be compensated by one or more films. So, in this paper, we have studied how to reduce the light leakage with viewing angle using discotic film in dark state.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권4호
• /
• pp.165-173
• /
• 2002

The goal of this paper is optimal switching angle of switched reluctance motor drive system fur maximum energy ratio. A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As the results, it improved the efficiency about 2[%]. And a torque ripple is also sufficiently reduced compared with that of the conventional approach. In order tn start softly regardless of large ripple torque, the profile of phase current is predicted by the ANFIS, and current control mode was adapted when it is operated under the starting speed. Variable implementations en the fields will guarantee the more practical drive system.

• 전력전자학회논문지
• /
• 제7권6호
• /
• pp.509-516
• /
• 2002

본 논문에서는 신경회로망을 이용한 스위치드 릴럭턴스 전동기(Switched Reluctance Motor, SRM)의 간편한 순시토크 추정기법과 스위칭 각 제어에 관해 연구하였다. 간단한 구조와 높은 효율 등의 많은 장점을 가지고 있는 SRM은 부하토크와 회전속도에 따라 운전특성이 달라지므로 최적운전을 위해서는 스위칭 각 제어가 필수적이다. 이러한 스위칭 각은 고정자 및 회전자 극호각, 토크 및 속도 능의 여러 변수들에 따라 달라지기 때문에 적정 스위칭 시점을 결정하는데 있어서 어려움이 있다. 따라서 본 논문에서는 부하토크 및 회전속도에 따라 효율이 가장 높은 적정 스위칭 각을 실험을 통해 선정한 후 신경회로망(Neural Network, NN)을 이용하여 전동기 제어에 적용하는 방안에 관해 고찰하였다. 또한 스위칭 각 제어에 있어서 필수적인 순시토크의 추정에 있어서도 신경회로망을 이용하여 인덕턴스의 비선형적인 특성이 고려되도록 하였다. 구현된 스위칭 각 제어기를 실제 시스템에 적용하였으며, 고효율 측면에서 선정된 스위칭 각 제어기의 동특성을 확인함으로써 스위칭 각 제어기의 적합성을 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.239-243
• /
• 2004

This paper presents a proper switching angle calculation method of Switched Reluctance Motor (SRM) for drill. The characteristic of SRM drive is very related to the scheduling of commutation angle and current waveforms. Therefore, a selection method of switching turn-on and turn-off angle is suggested for adaptational operation of SRM with varied rotor speed and load. Simulation and experimental results are presented for the validation of proposed method.