• Korean Journal of Veterinary Service
• /
• v.43 no.2
• /
• pp.89-97
• /
• 2020

This study was carried out to examine a novel inactivated Salmonella Typhimurium (S. Typhimurium) vaccine candidate for protection of mice against salmonellosis by immunization of BALB/c mice using various type adjuvant. The novel type-inactivated vaccine candidate was constructed by adding Chlorhexidine digluconate solution. BALB/c mice were divided into 6 groups of 15 mice apiece. The mice were intramuscularly (IM) primed at 6 weeks of age and were IM boosted 8 weeks of age. Groups A and B mice were injected with sterile phosphate-buffered saline as controls; group C mice were inoculated with 5×10⁸ cells/100 µL of formalin-inactivated S. Typhimurium cells and adjuvant ISA70; groups D~F mice were immunized with 5×10⁸ cells/100 µL of the inactivated vaccine candidate and adjuvant ISA70, adjuvant IMS1313 and adjuvant IMS1313 containing 30 ㎍/mL of GI24, respectively. All mice (except group A mice) were orally challenged with a virulent S. Typhimurium strain at 10 weeks of age. Mice from groups C-F had significantly increased IgG levels compared to control groups (A-B) mice. The levels of splenocyte IFN-γ and IL-4 in mice of all groups were measured by ELISA, resulting in increased immunity in group F mice compared to those of groups A-E mice. These data suggested that systemic and cell-mediated immune responses were highly induced by IM immunization with the vaccine candidate and adjuvant IMS1313 containing GI24. Furthermore, clinical signs such as death were observed in only 20% of group F mice after virulent Salmonella strain challenge, however, groups B and C (100%), and groups D and E (60%) mice died. This data suggested that mice immunized by intramuscular prime and booster with this vaccine candidate and adjuvant IMS1313 containing GI24 effectively protected mice from salmonellosis.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.884-888
• /
• 2005

An agar-degrading bacterium was isolated from north-eastern sea of Jeju island and cultured in marine agar 2216 media. Biochemical and morphologicl characteristics and 165 rRNA gene revealed that isolated strain was member of Agarivorans genus, and named Agarivorans sp. JA-1. Agarase was produced as growth-related and expressed regardless of agar presence. Optimal pH was 8 at 50 mM Clycine-NaOH buffer, and activity was maximum at $40^{\circ}C$E Enzymatic activity was maintained over $80\%$ at $60^{\circ}C$t and $70\%$ at $80^{\circ}C$ which is thermotolerant. Hence isolated novel Agarivorans sp. JA-1 strain and its beta-agarase could be used for the production of functional oligosaccharide from agar in solution state.

• Journal of Life Science
• /
• v.13 no.4
• /
• pp.421-427
• /
• 2003

A natural habit at bacterium, Enterobacter intermedious KH410 was isolated from freshwater plant root and identified. Adsorption of heavy metals such as lead, cadmium, and copper by this strain was examined. The minimal inhibitory concentrations(MIC) for each metal were 1.78 mM for lead, 0.17 mM for cadmium and 1.39 mM for lopper, respectively. Maximum production of dried cell was 2.56 g/$\ell$ in LB medium containing 0.5% NaCl, 1% yeast extract and 1% of lactose. Optimal conditions for adsorption were 0.6 dry g-biomass, at pH 4.0 and the temperature of $20^{\circ}C$. Adsorption equilibrium reached maximum after 30 min in 400 mg/$\ell$ metal solution. The adsorption capacity (K) of copper was 1.5 times higher than that of cadmium and lead was 1.1 times higher than that of cadmium. from the results obtained in this study, Freundlich adsorption model was applicable for all metals. Adsorption strength (1/n) of heavy metal ions were in the order of cadmium>copper>lead. The adsorption of dried cell for lead, cadmium, and copper was 56.2, 58.0, 55.8 mg/g-biomass, respectively. Pretreatment to increase ion strength was the most effective with 0.1 M NaOH whereas slight difference was found both KOH and $CaCl_2$ upon same concentration. Effective desorption was induced by 0.1 M EDTA for lead and 0.1 M $HNO_2$ for cadmium and copper.

• Restorative Dentistry and Endodontics
• /
• v.31 no.3
• /
• pp.169-178
• /
• 2006

This study was to verify that the combined application of NaOCl and EDTA was more effective in removal of smear layer than the application of NaOCl alone. furthermore it was aimed to find out the optimal time for the application of EDTA. Thirty five single rooted teeth were cleaned and shaped. NaOCl solution was used as an irrigant during instrumentation. After instrumentation, root canals of the control group were irrigated with 5 ml of NaOCl for 2 minutes. 30 sec, 1 min, and 2 min group were irrigated with 5 ml of 17% EDTA for 30 sec, 1 min, and 2 min respectively. Then the roots were examined with scanning electron microscopy for evaluating removal of smear layer and erosion of dentinal tubule. The results were as follows; 1. The control group: The smear layer was not removed at all. 2. The other groups: 1) $Middle\frac{1}{3}$: All groups showed almost no smear layer. And the erosion occurred more frequently as increasing irrigation time. 2) $Apical\frac{1}{3}$: The cleaning effect of 2 min group was better than the others. The results suggest that 2 min application of 17% EDTA should be adequate to remove smear layer on both $apical\frac{1}{3}\;and\;middle\frac{1}{3}$.

• Journal of agriculture & life science
• /
• v.45 no.4
• /
• pp.13-21
• /
• 2011

"Manggaedduk" produced specially in Uiryeong province, Gyeongnam, Korea is manufactured by traditional method using rice powder, sweet azuki bean paste, and leaves of Smilax china (called as Manggae-leaf). Moisture content of leaves did not show significant differences bay salt and purified salt treatment. The content was lower as the salt concentration increased. Shear force was higher in leaf salted with purified salt at room temperature than that salted with bay salt. On the other hands, the force was more higher in the leaves salted with bay salt at low temperature ($4^{\circ}C$). The shear force was higher as the concentration of both salts used for salting solution increased. As storage period was extended, shear force of salted leaf was weakened. Whiteness (L) and yellowness (b) of leaves stored at room temperature were higher than those stored at $4^{\circ}C$, although the redness (a) of Hunter value was not significantly different between storage temperatures. Salt concentration influenced lightness and yellowness, color of salted leaves stored at $4^{\circ}C$ resulted in enhanced greenness as compared to the leaves stored at room temperature. Thus, this study investigated the optimal storage conditions, salting conditions and storage temperatures of Smilax china leaves.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.2
• /
• pp.123-129
• /
• 1995

For the propose of increasing the value added, zeolite powder was granulated by adding Polyvinyl Alcohol (PVA) as cementing material. The optimal concentration of PVA for granulation and the physical properties of the prepared granule were investigated. Four percent PVA stock solution was made by adding distilled water at $90^{\circ}C$ water bath and incorporated with zeolite. The contents of water stable granule above 2.0mm in diameter was 98.0% in the case of 0.3% PVA addition and almost 100% in the case of 0.6% PVA addition. Increasing PVA concentration of granules increased the hardness and decreased the infiltration rate and the maximum water holding capacity of granules, However, the drying method hardly affected the physical properties of granules. With the increase in the mixing ratios of kaolinite or bentonite to zeolite, the hardness of granules increased but high water contents of granules resulted in rapid decrease in the hardness of granules. However, when smectite or perlite was mixed with zeolite, the increase in mixing ratios to zeolite resulted in the decrease in hardness, the increase in the infilteration rate and maximum water holding capacity of granules.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.915-921
• /
• 2021

In this study, we designed pantothenic acid (PA) loaded solid lipid nanoparticles (SLNs) for enhanced skin penetration of PA that is used for moisturizing agent in cosmetics with hydrophilic property. SLNs were prepared using various lipids and surfactants. PA loaded SLNs were fabricated using double emulsion method. The fabricated PA loaded SLNs assessed particle size, polydispersity index, zeta potential, loading capacity. Skin penetration study was conducted using artificial skin tissue originated from human epidermis as one of the reconstructed human epidermis models. The mean particle size and zeta potential of SLNs ranged from 192.15 nm to 369.87 nm and -21.39 mV to -40.55 mV, respectively. The loading efficiency and loading amount of PA loaded SLNs were ranged from 44.36% to 57.16% and 12.60% to 16.36%, respectively. The results of penetration demonstrated that all SLNs improved PA skin penetration. In addition, the amount of PA from SLNs were approximately 3.8 - 8.8 times higher than that from PA solution. Therefore, the fabricated SLNs demonstrated the enhancment of skin penetration of PA. Particularly, the SLN, which used glyceryl behenate and Span 60, showed optimal skin penetration of PA.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.4
• /
• pp.326-332
• /
• 2021

Swabs are useful and common sampling tools in various research fields, such as medicine, ecology, biotechnology, forensic medicine, and pollutant monitoring systems. Collection reagents are one of the essential components in sampling. It is important to develop a sample collection kit and designate an appropriate storage temperature because samples need to be stored for a long time. The purpose of this study was to identify the effects of three collection reagents and three storage temperatures on the recovery of living bacteria without media. We selected Escherichia coli and Staphylococcus aureus as representative environmental bacteria. Distilled water (DW), phosphate buffered saline (PBS), and Tris-EDTA (TE) buffer were used as collection reagents and stored at 22℃, 4℃, and -70℃ after sampling. The results of using each collection reagent and storage temperature on the bacteria were compared using relative light units (RLU) and the number of colony forming units (CFU). When using -70℃ storage temperature and the TE buffer, the number of living bacteria and the RLU values remained constant. It is therefore recommended that the sample be stored at -70℃ immediately after collection and a TE buffer solution be used as the collection reagent.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.3
• /
• pp.157-165
• /
• 2019

Recently, large and small earthquakes have occurred in the Korean peninsula. In this sense, Korea is no longer considered as an earthquake free zone. Especially, it is necessary to respond quickly to earthquake tsunami which may be caused by the influence of neighboring countries with large earthquakes. Since the occurrence of tsunamis can cause great casualties, it is very important to allocate the location of the shelter in case of an earthquake. Although many researches on shelter allocation have been conducted in various ways, but most of them have been analyzed based on administrative district resident data, resulting in a lack of reality. In this study, floating population data were used to reflect reality in case of emergency situations, and genetic algorithm, which produce good results among the heuristic algorithms, was used to select shelter locations. The number of evacuees was used as a objective function of genetic algorithm and the optimal solution was found through selection, crossover and mutation. As a result of the research on Busan Haeundae-Gu, selected as a research area, allocating eight shelters was the most efficient. The location of the new shelters was selected not only in residential areas but also in major tourist areas whose results can not be derived from administrative district resident data alone, and the importance of utilizing the floating population data was confirmed through this study.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.2
• /
• pp.29-43
• /
• 2019

The calibration of microscopic traffic simulation models has received much attention in the simulation field. Although no standard has been established for it, a genetic algorithm (GA) has been widely employed in recent literature because of its high efficiency to find solutions in such optimization problems. However, the performance still falls short in simulation analyses to support fast decision making. This paper proposes a new calibration procedure using a dual GA and central composite design (CCD) in order to improve the efficiency. The calibration exercise goes through three major sequential steps: (1) experimental design using CCD for a quadratic response surface model (RSM) estimation, (2) 1st GA procedure using the RSM with CCD to find a near-optimal initial population for a next step, and (3) 2nd GA procedure to find a final solution. The proposed method was applied in calibrating the Gipps car-following model with respect to maximizing the likelihood of a spacing distribution between a lead and following vehicle. In order to evaluate the performance of the proposed method, a conventional calibration approach using a single GA was compared under both simulated and real vehicle trajectory data. It was found that the proposed approach enhances the optimization speed by starting to search from an initial population that is closer to the optimum than that of the other approach. This result implies the proposed approach has benefits for a large-scale traffic network simulation analysis. This method can be extended to other optimization tasks using GA in transportation studies.