• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.13-19
• /
• 2017

In modern industry, the machining process is very important for manufacturing various products. More than 80% of machining processes apply rough cutting. The target of this study is to establish the optimal condition of rough cutting using trochoidal motion for improving productivity. For research, the range of cutting conditions is defined by trochoidal motion. The cutting time and tolerance are measured and evaluated according to the cutting conditions of machining. Experimental data are utilized for comparing trochoidal motion and contouring. It is found that the cutting time of trochoidal motion is two times less than that of contouring with optimal cutting conditions. To conclude, trochoidal motion for rough cutting under appropriate cutting conditions improves productivity and shortens processing time significantly.

• 한국생산제조학회지
• /
• 제19권4호
• /
• pp.582-588
• /
• 2010

This paper presents the Application of Response Surface Method for Optimal Transfer Conditions of MLCC Alignment System. his paper is composed of two parts: (1) Testing performance verification of MLCC alignment system, compared with manual operation; (2) Applying response surface method to figuring out the optimal transfer conditions of MLCC transfer system. Based on the successfully developed MLCC alignment system, the optimal transfer conditions have been explored by using RSM. The simulations using $ADAMS^{(R)}$ has been performed according to the cube model of CCD. By using $MiniTAB^{(R)}$, we have established the model of response surface based on the simulation results. The optimal conditions resulted from the response optimization tool of $MiniTAB^{(R)}$ has been verified by being assigned to the prototype of MLCC alignment system.

• 대한산업공학회지
• /
• 제18권1호
• /
• pp.47-62
• /
• 1992

This paper describes a procedure for optimizing the route selection and production conditions in alternate process plans under a cellular manufacturing environment. The type of production is mainly production-to-order which deals with unexpected products as the changes factor. The flexible cellular manufacturing can be viewed as a complete unification of both flexible manufacturing process and flexible production management. The integrated problem for designing flexible cellular manufacturing associated with determining the optimal values of the machining speeds, overtime, and intercell flow is formulated as Nonlinear Mixed Integer Programming(NMIP) in order to minimize total production change cost. This is achieved by introducing the marginal cost analysis into the NMIP, which will compute the optimal machining speed, overtime, intercell flow, and routing. The application of this procedure offers greater flexibility to take advantage of the cellular manufacturing due to the optimum use of resources. A solution procedure for this problem was developed and a numerical example is included.

• 한국생산제조학회지
• /
• 제8권1호
• /
• pp.112-118
• /
• 1999

Aluminum alloy, which is advantageous to machining and injection, makes a great contribution to shortening in delivery time, infection cycle time and reducing expense. This study presents machining conditions for mild materials and describes the difference between theoretical and practical machined surface roughnesses affected by various machining conditions. Machining results have been evaluated and analyzed under varying machining conditions. Special properties of the mild materials have been presented by the quantitative analysis and the optimal machining condition has been proposed for the mild materials.

• 한국기계가공학회지
• /
• 제21권2호
• /
• pp.123-129
• /
• 2022

Quartz (SiO2) has high abrasion and heat resistances and excellent chemical and mechanical properties; therefore, it is used in various industries, such as machinery, chemistry, optics, and medicine. Quartz is a high-hardness and brittle material and is classified as the topmost difficult-to-cut material, which is because of the cracking or chipping at the edge during processing. Corner wear, such as cracks and chippings that occur during cutting, is a major cause for the deterioration in the machining quality. Therefore, many researchers are investigating various techniques to process quartz effectively. However, owing to the mechanical properties of quartz, most studies have been conducted on grinding, micromachining, and microdrilling. Few studies have been conducted on quartz processing. The purpose of this study was to analyze the machining characteristics according to the machining factors during the slot machining of quartz using a cubic boron nitride (CBN) tool and to select the optimal machining conditions using the Taguchi method. The machining experiment was performed considering three process variables: the spindle speed, feed rate, and depth of cut. The cutting force and surface roughness were analyzed according to the processing conditions.

• Food Science and Biotechnology
• /
• 제17권1호
• /
• pp.208-211
• /
• 2008

Previously, it has been reported that Aspergillus oryzae can efficiently degrade unpleasant odor components such as butyric acid and 3-methyl butanoic acid from meju, a major ingredient in both Korean soybean paste (doenjang) and soy sauce. In this study, the optimal manufacturing conditions for the production of superior quality Korean soybean paste and soy sauce were determined. Specifically, A. oryzae AJ 100 was utilized to improve the flavor of these products. Mixtures of Korean soybean paste and A. oryzae AJ 100 culture (2 : 1), and of Korean soy sauce and A. oryzae AJ 100 culture (5 : 1), were incubated for 2 weeks at $30^{\circ}C$, and showed improved flavor. Butyric acid and 3-methyl butanoic acid were clearly degraded under these culture conditions.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.813-821
• /
• 2002

Glass fiber reinforced PET matrix composite was manufactured by rapid press consolidation technique as functions of temperature, pressure and time in pre-heating, consolidation and solidification stages. The optimal manufacturing conditions for this composite were discussed based on the void content, tensile, interlaminar shear and impact properties. In addition, the levels of crystallinity with various manufacturing conditions were measured using differential scanning calorimetry to investigate the mechanical properties of this composite material as a function of crystallinity. Among many processing parameters, the mold temperature and the cooling rate after forming were found to be the most critical factors in determining the level of crystallinity and mechanical properties. The level of crystallinity affects the tensile properties to some degree. However, impact properties are affected much more. It also affects the degree of ductility, which determines the impact energy of this material.

• 한국정밀공학회지
• /
• 제23권12호
• /
• pp.38-45
• /
• 2006

In this work, optimal finish machining condition considering total time for mold or electrode manufacturing was investigated. First, manual finishing time according to the machining condition was analyzed for the work material. The effect of runout and phase shift of tool path on surface finish was also considered in those analyses. Secondly, optimal manual finishing processes were determined for various machining conditions. Finally, finish machining time and corresponding manual finishing time were taken into account for the estimation of the total time of manufacturing mold. Though small feed per tooth and pick feed reduced the manual finishing time, the finish machining time increased in such conditions. With a machining condition of feed per tooth of 0.2 mm and pick feed of 0.3 mm, the minimum total time of manufacturing mold was achieved in our machining condition.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제30회 추계학술대회
• /
• pp.225-232
• /
• 1999

The effect of manufacturing parameters such as molding and curing conditions on friction characteristics of friction materials was studied using a pad-on-disk type friction tester. Friction materials containing 15 ingredients were investigated for an optimal manufacturing condition for the best friction characteristics employing Taguchi robust experimental design. The main effects were different for mechanical properties and friction characteristics and were strongly influenced by manufacturing conditions. An optimum manufacturing condition was obtained to achieve the best friction characteristics concerning mechanical properties(hardness, porosity, wear resistance), friction stability, and change of rotor temperature.

• 한국식품영양학회지
• /
• 제32권5호
• /
• pp.571-579
• /
• 2019

For the purpose of promoting the consumption of rice powder, 5 cultivars were applied differently to establish the optimal manufacturing conditions and measured Hunter color values, hardness and expansion rate of Yakgwa for the optimal conditions. Looking into the optimal manufacturing conditions of Yakgwa, the commercial flour-facilitating Yakgwa is shown to have a great shape when the mold is made with a thick paste for C-2 manufacturing method, Hangaru 100 mesh for H100-2 manufacturing method, Hangaru 200 mesh for H200-2 manufacturing method, Shingil 100 mesh for S100-2 manufacturing method, and Shingil 200 mesh for S200-1 manufacturing method. It also showed a trend of chewy taste after frying without cracks. Hunter color values (L) and red chromaticity and value b of yellow chromaticity indicated a lower value for the commercial flour and Hangaru 200 mesh in its entirety. The hardness of Yakgwa is within the range of 1,981.41~3,756.45 g and the degree of hardness is shown differently for each rice powder exclusive cultivars. Rice flour developed as rice powder 5 cultivars, and as a result of measuring chromaticity, hardness and expansion rate of Yakgwa for the quality characteristics, the item of hangaru 200 mesh had outstanding quality characteristics for Yakgwa.