• Journal of the Korean Society of Tobacco Science
• /
• v.2 no.2
• /
• pp.20-37
• /
• 1980

Among the 34 strains of Nicotinophiles selected in the previous experiments, strain NCT27 identified with Pseudomonas putida and strain NCT30 identified with Arthrobacter oxydans biotype nan thus were Investigated for optimization of growth conditions for nicotine degradation and other cultural characteristics. The compositions of optimized medium were to be following: $KH_2PO_4$ 2.Ogr, KCI 5.Ogr, $MgSO_4$.$7H_2O$ 20mg, $MnSO_4$.$6H_2O$ 0.2mg, $FeSO_4$.$7H_2O$ 1.Omg, Col$^{++}$ (Cobalt Acetate),2.O$\gamma$, N1$^{++}$ (NiSO4,6H2O) 0.5$\gamma$, and yeast extract 80mg per liter. The optimum initial concentrations of nicotine for growth were 0.4% for Pseudomonas and 0.1% for Arthrobacter, respectively. The optimum temperature and pH were 3$0^{\circ}C$ and 7.0 for both of strains. The pH of culture medium of Pseudomonas was changed from acidic condition to basic one in going from the logarithmic growth phase to the stationary growth phase. In contrast with Pseudomonas, it remained constant in case of Arthrobacter. The growth of Arthrobacter was completely inhibited in the nicotine concentration of 0.7&. However, Pseudomonas could grow even in the nicotine concentration of 1.0%. Moreover, it could grow successfully in the tobacco extract media as well as media containing carbon and nitrogen sources other than nicotine. The maximum rates of nicotine degradation were to be 1.22 gr./hr./liter for Pseudomonas and 0.186 gr./hr./liter for Arthrobacter, respectively.

• Korean journal of food and cookery science
• /
• v.31 no.2
• /
• pp.175-184
• /
• 2015

The purpose of this study was to determine the optimal mixing ratio of Agaricus blazei Murill powder and butter in the preparation of cookies. The experimental design utilized herein was based on central composite design for response surface methodology, which included 10 experimental points, including 2 replicates for Agaricus blazei Murill and butter. The physical, mechanical, and sensory properties of the test were measured, and these values were applied to the mathematical models. A canonical form and perturbation plot showed the influence of each ingredient on the final mixed product. The spread ratio increased significantly with an increase in Agaricus blazei Murill powder and butter (p<0.05). The response surface methodology was applied to evaluate the effect of Agaricus blazei Murill powder and butter on cookie moisture and color (L, a) (p<0.001). Sensory evaluation showed significant values for color (p<0.05), flavor (p<0.05), texture (p<0.05) and overall quality (p<0.01) in the predicted model. The optimum formulation by numerical and graphical methods was calculated as follows: Agaricus blazei Murill powder 3.63 g, butter 55.37 g.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.113-119
• /
• 2000

In order to produce xylitol with high yield, experiments were carried out to develope xylitol dehydrogenase (XDH) defective m mutant from Pichia stipitis and to investigate the xylit이 fermentation characteristics of mutant strain. After treatment of P s stipitis with EMS, mutant PXM-4 was selected based on the XDH activity and xylitol production capability. Among the tested c cosubstrates, galactose was selected as an adequate cosubstrate on xyl뻐I production of mutant PXM-4. With the increase of galactose concentration, xylitol production was decreased because the transport of xylose into cell was inhibited by g galactose. The optimal concentration of galactose for the production of xylitol using 20 g/L xylose was 20 g/L. Under this c condition, maximum concentration of xylitol and yield were 14.4 g/L and 97%, respectively. In order to prevent the inhibitory e effect of xylose transport by galactose, galactose was fed with low concentration and the concentration of xylitol produced w was increased up to 25 g/L. In the fermentation of corn cob hydrolyzate by mutant PXM-4, xylose was completely converted t to xylit이 with a 100% yield in 4 days culture.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.77-85
• /
• 1996

The optimal initial pH for the ethanol production by Saccharomyces K35 was found to be 5.0, and about 80% of yield was obtained when 200g/$\ell$ of glucose was used as a substrate, which showed sugar tolerant. As the additives and cross-linking agent, the addition of 1.67%(w/v) Celite R-634 together with 0.33%(v/v) of glutaraldehyde(ACG bead) resulted in better stability, ethanol productivity and cell viability than Ca-alginate bead. Also, ACG bead seemed to be more resistant to phosphate ion than Ca-alginate bead, considering outgrowing cell concentration in the media. Scanning electron microscopic observation depicted that the surface of ACG bead was almost similar to the original state but not for Ca-alginate bead. When repealpd-batch culture was performed with Ca-alginate bead for 60 days in a 500m1 Erlenmeyer flask, ethanol and cell concentration were maintained about 138g/$\ell$-gel and 29~30g/$\ell$-gel, respectively, up to 40 days(7th run number), and then both were rapidly decreased. In the case of ACG bead, ethanol and cell concentration were maintained about 130~150g/$\ell$-gel and 32~35g/$\ell$-gel, respectively, up to 60days(10th run number). Cell viability was maintained about 70%, and outgrowing cell concentration was below 5.8% of total cell concentration.

• The Korean Journal of Mycology
• /
• v.16 no.2
• /
• pp.70-78
• /
• 1988

To obtain basic information for the genetic analysis and breeding of Flammulina velutipes, some factors affecting the release of protoplasts from the fungus were studied. Potato Dextrose peptone Agar medium was suitable for the growth of the mycelium and the protoplast formation of F. velutipes. The culture age for the high yields of protoplast was 5 days on PDPA. Few protoplasts were formed from the mycelium cultured on Mushroom minimum Media. The highest yield of protoplasts was obtained in enzyme solution containing Novozyme 234 plus cellulase CP at 10 mg $ml^{-1}$ concentration, while a half amount of protoplasts was obtained in enzyme solution containing Novozyme 234 only. The optimal reaction time of the mycelium in the Iytic enzyme mixtures was 3 hours. The best osmotic stabilizer for the protoplast formation of the mycelium was 0.6M sucrose without buffer at pH 6.2.

• Korean Journal of Microbiology
• /
• v.44 no.1
• /
• pp.74-79
• /
• 2008

The purpose of this study is to clone cgt gene from Paenibacillus sp. JB-13 and to overexpress the protein in E. coli. For this purpose, the cgt gene was amplified from Paenibacillus sp. JB-13 genomic DNA by PCR using degenerate oligonucleotide primers. The sequence analysis results showed that the cgt gene from Paenibacillus sp. JB-13 has 98% homology with the cgt gene of Bacillus sp. To overexpress the protein, the cgt gene was cloned into pEXP7 expression vector and transformed into E. coli. The production of CGTase by recombinant E. coli was optimized under following conditions: 0.5% glucose, 3.0% polypeptone, 0.3% $K_2HPO_4$, 0.5% NaCl, and 7.0 of initial pH, 2.0% of inoculum, $37^{\circ}C$ of culture temperature for 14 hr. And the optimal agitation was found at 0.1 vvm. The synthesis of 2-O-${\alpha}$-D-Glucopyranosyl L-Ascorbic acid (AA-2G) using the CGTase expressed in E. coli was identified as AA-2G by HPLC and HPLC confirmed that treating AA-2G made by cloned CGTase with ${\alpha}$-glucosidase substantially produced AA and glucose.

• Korean Journal of Microbiology
• /
• v.50 no.1
• /
• pp.33-39
• /
• 2014

One hundred forty four bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in Daejeon area. Among them, one bacterial strain was selected for this study based on its emulsification activity, growth rate and surface tension activity, and this selected bacterial strain was identified as Pseudomonas sp. HN37 through physiological- biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. HN37 utilize the several aliphatic hydrocarbons, 3,5-dinitrosalicylic acid and 2,4-dichlorophooxyacetic acid as a sole carbon source. And this bacterial strain showed a high resistance to antibiotics such as ampicillin and chloramphenicol, as well as heavy metals such as Ba, Cr, Li and Mn. Also, it was found that the optimal pH and temperature for the cell growth, surface tension, and emulsification activity of Pseudomonas sp. HN37 were pH 6.0-9.0 and $30^{\circ}C$, respectively. The emulsification and surface tension activity was reached the maximum to 1% (V/V) crude oil and 1% (W/V) NaCl concentration. The surface tension of the culture broth was decreased from 62 to 27 dyne/cm after fifteen hours of inoculation in LB media.

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.461-464
• /
• 2002

A Chemoautotroph identified as an Aeromonas sp. strain JS-1 was isolated from fresh water. Aeromonas sp. strain JS-1 used the $H_2$ and $CO_2$ as energy and carbon sources, respectively. Growth characteristics for improving the $CO_2$ fixation rate were examined in batch cultivation. Its results shown that the optimal growth appeared at culture conditions of $35^{\circ}C$, pH 7 and NaCl 0.1%(w/v). Some hydrogen-oxidizing bacteria were reported that the enzyme activity of ribulose 1,5-bisphosphate carboxylase- oxygenase (RubisCO-EC 4.1.1.39), in the key enzyme of the Calvin-Benson cycle. A RubisCO was purified from a chemoautotrophic bacterium, Aeromonas sp. strain JS-1. the enzyme was purified by ammonium sulfate precipitation, DEAE-sepharose CL-6B and gel filtration chromatography. The RubisCO showed that molecular mass was about 560KDa from gel filtration chromatography and nondenaturing PAGE, and the RubisCO was confirmed to consist of $L_8S_8$ enzyme structure by sodium dodecyl sulfate polyacrylamide gel electrophoresis. A large subunit was about 56KDa and small one was about 15kDa. The Km values of the enzyme for ribulose 1,5-bisphosphate(RUBP), $NaH^{14}CO_3$, and $Mg^{++}$ were estimated to be 0.25mM, 5.2mM, and 0.91mM, respectively. The optimum temperature for RubisCO enzymatic activity were $50^{\circ}C$, and the enzymatic activity was stable up to $45^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.41 no.1
• /
• pp.33-43
• /
• 2013

A bacterium producing a fibrinolytic enzyme was isolated from Cheonggukjang. The bacterium was identified as a strain of Bacillus amyloliquefaciens by 16S rDNA analysis and designated as B. amyloliquefaciens HC188. The optimum culture medium appeared to be one containing 0.5% (w/v) maltose and 0.5% (w/v) soytone. Bacterial growth in the optimal medium at $37^{\circ}C$ reached the stationary phase after 27 h of incubation and the fibrinolytic enzyme showed optimum activity at 24 h. The enzyme was purified by 20-80% ammonium sulfate precipitation, CM Sepharose fast flow ion exchange chromatography, and Sephacryl S-200HR column chromatography. Its specific activity was 38359.3 units/mg protein and the yield was 5.5% of the total activity of the crude extracts. The molecular weight was 24.7 kDa and the amino acids of the N-terminal sequence were AQSVPYGVSQIKAPA. The fibrinolytic enzyme activity had an optimum temperature of $40^{\circ}C$ and an optimum pH of 8.0, and the enzyme was stable in the ranges $20-40^{\circ}C$ and pH 6.0-8.0. Enzyme activity was increased by $Ca^{2+}$ and $Co^{2+}$ but inhibited by $Cu^{2+}$, EDTA, and PMSF. It is suggested that the purified enzyme is a metallo-serine protease.

• Journal of Society of Preventive Korean Medicine
• /
• v.8 no.2
• /
• pp.99-113
• /
• 2004

Problems and current situation of public health globally and domestically were analyzed in this study and based on these findings, ways to improve from western medicine and Oriental medicine can be deduced as follows: 1. Current problems of public health in Korea and the world 1) Increase of diseases resulted from daily habits and infectious diseases, many are at the brink of being ill. Quality of life from extended life span and unbalanced health care must be solved. 2) Natural and societal factors including host factors, public health service, and other external and internal factors play an important role in deciding healthy and being ill. 3) Some of the limits and problems of modem medicine include insufficient academic knowledge and incomplete theory, as well as misled approach to the treatment. Human itself isn't perfect organism and other realistic problems hinder one's well-being. 4) Regardless of western medicine or Oriental medicine, patients were approached as someone with diseases and disorders, and wholistic approach was disregarded. Lack of clinical training, absence of clear educational philosophy and goal are some of the reasons why the education isn't under concrete system 2. Important factors for the medical education and proper direction for the education of Oriental medicine 1) Important factors for medical education - Education should not be limited on the human health and illness, but also cover qualities such as well-being, social welfare, service, and happiness. Every aspects of human life must be considered and attended for more productive outcome. - Basic understanding of humanity must be included in the educational curriculum - Foundation of human diseases and pain are associated with inner life and surrounding causes including family, society, nature, race, culture, religion, politics, and etc., thus the education must be approached to recognize aforementioned criteria. 2) Proper direction for the education of Oriental medicine - Values of Oriental medicine for medical principles and importance of lifehood must be educated. - Educational goal, limits, and levels must be established for the school of Oriental medicine - Respect for life must be the top priorities of educational direction which should lead to solution based education for the human health. Latest medical theory and technology should be accommodated as well as prevention, treatment, and balancing of basic courses and clinical training for optimal education.