• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.787-790
• /
• 2003

A rf triode magnetron sputtering system is designed and installed its construction in vacuum chamber. In order to calibrate the rf triode magnetron sputtering for thin films deposition processes, the effects of different glow discharge conditions were investigated in terms of the deposition rate measurements. The basic parameters for calibrating experiment in this sputtering system are rf power input, gas pressure, plasma current, and target-to-substrate distance. Because a knowledge of the deposition rate is necessary to control film thickness and to evaluate optimal conditions which are an important consideration in preparing better thin films, the deposition rates of copper as a testing material under the various sputtering conditions are investigated. Furthermore, a triode sputtering system designed in our team is simulated by the SIMION program. As a result, it is sure that the simulation of electron trajectories in the sputtering system is confined directly above the target surface by the force of $E{\times}B$ field. Finally, some teats with the above 4 different sputtering conditions demonstrate that the deposition rate of rf triode magnetron sputtering is relatively higher than that of the conventional sputtering system. This means that the higher deposition rate is probably caused by a high ion density in the triode and magnetron system. The erosion area of target surface bombarded by Ar ion is sputtered widely on the whole target except on both magnet sides. Therefore, the designed rf triode magnetron sputtering is a powerful deposition system.

• The Journal of Internal Korean Medicine
• /
• v.19 no.1
• /
• pp.318-328
• /
• 1998

The aqua-acupuncture blended with liquid medicine and acupuncture is known to be effective in treating various medical disorders. This study used gallbladders of bear (WoongDam, WD, Ursus arctos Linne) and pig(JeoDam, JD, Sus scrofa domestica Brisson) plus the stones from the ox gallbladder(WooHwang, WH, Bos taurus var, domesticus Gmelin) to produce the liquid medicine. For the acupuncture, acupoint of ST -36 which is located one finger breadth from the anterior crest of the tibia was selected. There were a couple of purposes in this experiment. First, the relationship between aqua-acupuncture and gastric activity was scrutinized. Secondly, the possibility of pig gallbladder as an alternative organ to bear gallbladder for making liquid medicine was evaluated. Thirdly, different injection concentration ratio of liquid medicine was tried to figure out the optimal dosage for the aqua-acupuncture. The data of the present results indicated that the mixtures of WD + WH and JD + WH have a similar hypotonic effect on the stomach. These findings illustrated that aqua-acupuncture or hydroacupuncture showed inhibitory effect on the stomach in addition to its well-known prophylactic value. Also the possible alternative medical organ of pig gallbladder was checked out since two mixtures illustrated very similar trends in suppressing the gastric activity. The injection concentration ratio was not very different between two mixtures in terms of gastric motility except a couple of ratio. In conclusion, the aqua-acupuncture is a promising way to control the gastric activity for better medical purposes and the gallbladder of pig was assessed as a prospective one for making a liquid medicine.

• Physical Therapy Korea
• /
• v.15 no.3
• /
• pp.1-7
• /
• 2008

Multi-sensory systems, including the visual, somatosensory, and vestibular ones, are involved in maintaining standing balance. The organization of these sensory systems is as important as the efficiency of each individual system in maintaining optimal balance. The purpose of the present experiment was to investigate the developmental changes in static standing balance and sensory organization under altered sensory conditions. This study involved 64 children (from 4 to 15 years of age) and 17 young adults. The children were divided into four age groups: 4~6, 7~9, 10~12, and 13~15 years. Static standing balance was assessed with the one-leg standing test under four different sensory conditions: the children stood on a firm surface with (1) eyes open or (2) closed, and they stood on a foam surface with eyes (3) open or (4) closed. In balancing ability, the age groups exhibited significant differences. The function of sensory organization for balance control was poorer for the children than for the young adults. The functional efficiency of the somatosensory system of the children aged 7~9 years was at the young adults' level, and the visual function of the children aged 10~12 years had also reached the young adults' level. However, the functional efficiency of the vestibular system of children was significantly lower than that of the young adults, even at the age of 15 years. This may indicate that sensory organization and standing balance are still developing after the age of 15 years.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.4
• /
• pp.64-73
• /
• 1999

This study was conducted to find out the effects of hydroseeding material and seed mixture on the revegetation of rock cut-slopes by PEC4 (Polymer-Ecology-Control) Hydroseeding Measures. PEC4 hydroseeding material was applied to four cut-slopes using hydroseeding measures from April to August, 1999, and the field survey was carried out by monthly. PEC4 material consisted of bark compost and organic soil amendments. This material has high content of organic matter and high level of water holding capacity. PEC4 hydroseeding material shows low level of soil hardness, so it gives to good condition for seed germinating and plant growing in early stage. PEC4 material attached at rock cut-slopes by two types of adhesive agent was not eroded by rainfall. The plant coverage and number of plant species were affected by mixing ratio of seeds and seeding timing. From the viewpoint of plant establishment, the optimal hydroseeding timing of mixed seeds for plant growth seems to be in May. Most of the plant seeds were germinated well and they covered rock cut-slopes so quickly and effectively. Plant importance value of Silene armeria and Platycodon grandiflorum. were higher than any other seeded-native species in the competition between native species and exotic species, so they have enough possibility to be used for slope revegetation works. Thus it leads to conclusion that the revegetation method used in this experiment was a very effective method for plant establishment on rock cut-slopes.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.361-362
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD (Liquid Crystal Display) transfer system. In this paper, the 1st DOE (Design of Experiment) is conducted to find out main-effect factors fur the design of gripper part. Thirty-six experiments are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The 2nd DOE is conducted to obtain RSM (Response Surface Method) equation. The CCD (Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level reliability, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.161-167
• /
• 2006

The purpose of this study is to find the optimal conditions of PCM slurry manufacturing equipment for saving the marketing cost and keeping the original quality of products. In addition, the characteristics of the movable container for shipping or distributing products is analysed. The major results are as follows. 1. PCM thermal storage system is designed with the conditions of temperature($-5{\sim}10^{\circ}C$), cold chain time(30 minutes), and one time usage(50 liter). This system includes tank, freezer, circulating pump, cycle type heat exchanger, swelling tank, equipment of supplying PCM supplying unit includes cold tank, cycle type heat exchanger, suction unit and control equipments, etc. 2. After ability test of PCM thermal storage system, it shows that the required freezing time of PCM thermal storage system is less than one of the previous system. The reason is that churn (top and bottom) and compulsion circulation are occurred simultaneously and unit cooler type method is better than chiller type method. 3. By the experiment of transportation latent heat container, it is decided that the best container is $K_1$ with latent heat temperature($0{\sim}5^{\circ}C$) and density(0.15%). However, for $K_l\;and\;K_2$, it is necessary more studies on latent heat thermal conditions and conditions of making method.

• Korean Journal of Microbiology
• /
• v.36 no.1
• /
• pp.74-78
• /
• 2000

Vibrio, Photobacterium, Alteromonas and Xenorhabdus species are capable of emitting light, called bioluminescence. They exist in marine, freshwater and terrestrial environments. Bacterial bioluminescent reaction is that reduced riboflavin phosphates and a long-chain aldehyde are oxidized in the presence of molecular oxygen and enzyme luciferase. This experiment aims to develop the proper culture media and to optimize the storage condition for the recovery of bioluminescent activity in Photobacterium phosphoreum. The Luria broth (LB) medium was modified for cultivation of Photobacterium phophoreum, called as modified LB(mLB) medium. The mLB medium is LB fortified with 3% glycerol and 1.5% NaCl. In mLB medium. bacterial growth and bioluminescent activity are 25% higher than those in a Nutrient broth medium. When the cell stocks were stored at $-20^{\circ}C$, $-70^{\circ}C$ and LN2 for 3 months, cell growth and bioluminescent activity of culture after stored at $-20^{\circ}C$ were better than those of other treatments. The highest bioluminescent activity obtained at the late exponential phase in all treatments. When the cell stock was freeze-dried with 5% adonitol as a cryoprotectant, the recovery of cell was better than those of control and freeze-dried cell stock without addition of cryoprotectant.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.1
• /
• pp.133-143
• /
• 2018

In spite of the growing importance of landscaping trees, the rate of flawed and withered trees damaged by pest, disease, drought or frost is increasing. In order to evaluate the performance of the Tree Protective Pad, which are developed to reduce the failure ratio in landscape planting, the tree protective pad for 'digging', 'pest controlling', and 'insulating' are tested based on the five functional criteria; moisturizing effect, wither preventive effect, pest and disease control, thermal effect, tensile strength, and environmental performance. The result of this study is as follows. The moisturizing effect of the tree protective pad for digging is found to be outstanding. According to the result of testing the pad on trees, in particular, it is better than jute tape in wither preventive effect, which means it is expected to prevent flaw and wilt from planting during the improper seasons like summertime. The experiment of installing the protective tree pad for pest controlling to the trunk of Quercus mongolica shows that preventive effect of the pad from diseases and insects is superior, and it also has economical effect by reducing the use of agricultural chemicals. The comparative test of the pad for insulating and jute tape proves that the temperature of the pad is about $2^{\circ}C$ higher than outside. The rate of tensile strength and biodegradation of the pad exceeds the optimal level, so it is revealed that the pad may be the work efficient and environment-friendly product. Likewise, by timely irrigating trees, the tree protective pad economically prevents trees from pest, disease,drought or frost, which may be caused by improper seasonal or delayed planting. As a means of reducing the flaw and facilitating the growth of trees, the exceptional performance of the pad is expected to effectively used in landscape planting and management.

• Smart Structures and Systems
• /
• v.18 no.1
• /
• pp.53-74
• /
• 2016

This paper presents an experimental study on constructing a tunable secondary suspension for high-speed trains using magneto-rheological fluid dampers (referred to as MR dampers hereafter), in the interest of improving lateral ride comfort. Two types of MR dampers (type-A and type-B) with different control ranges are designed and fabricated. The developed dampers are incorporated into a secondary suspension of a full-scale high-speed train carriage for rolling-vibration tests. The integrated rail vehicle runs at a series of speeds from 40 to 380 km/h and with different current inputs to the MR dampers. The dynamic performance of the two suspension systems and the ride comfort rating of the rail vehicle are evaluated using the accelerations measured during the tests. In this way, the effectiveness of the developed MR dampers for attenuating vibration is assessed. The type-A MR dampers function like a stiffness component, rather than an energy dissipative device, during the tests with different running speeds. While, the type-B MR dampers exhibit significant damping and high current input to the dampers may adversely affect the ride comfort. As part of an ongoing investigation on devising an effective MR secondary suspension for lateral vibration suppression, this preliminary study provides an insight into dynamic behavior of high-speed train secondary suspensions and unique full-scale experimental data for optimal design of MR dampers suitable for high-speed rail applications.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.2 s.29
• /
• pp.161-167
• /
• 2007

The goal of this paper is to develop the speech recognition system which can control the ship's auto pilot. The feature parameters predicting the speaker's intention was extracted from the sample wheel orders written in SMCP(IMO Standard Marine Communication Phrases). And we designed the post-recognition procedure based on the parameters which could make a final decision from the list of candidate words. To evaluate the effectiveness of these parameters and the procedure, the basic experiment was conducted with total 525 wheel orders. From the experimental results, the proposed pattern recognition procedure has enhanced about 42.3% over the pre-recognition procedure.