• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.139-142
• /
• 2003

In this study, casting/forging process was used to produce an aluminum lower control arm for automobiles. Firstly, casting experiments were carried out to get an enhanced preform for forging the lower control arm. In the casting experiment, the effect of an additive, Sr, on the mechanical properties such as tensile strength and elongation and the microstructure of a cast preform were investigated. And a finite element analysis was peformed to determine an optimal configuration of the cast preform. Lastly, a forging experiment was carried out to make the final product of aluminum lower control arm by using the above cast preform. In the casting experiments, when 0.025% Sr was added into molten A356, the maximum values of tensile strength and elongation of the cast preform were obtained. In the forging experiment, It was confirmed that the optimal configuration of a cast preform predicted by FE analysis was very useful. The cast/forged product using designed preform was made without any defects.

• 동력기계공학회지
• /
• 제15권2호
• /
• pp.69-77
• /
• 2011

In this paper, an optimal PID sliding mode controller is proposed for the position control of electro-hydrostatic actuator(ERA) systems with system uncertainties and saturation in the motor. An ERA prototype is developed and system modeling and parameter identification are executed. Then, optimal PID and optimal anti-windup PID controller are designed based on identified system model by using optimization toolbox in MA TLAB/Simulink and the performance of the two control systems are compared by experiment. It was found that the optimal anti-windup PID control system has better performance than the optimal anti-windup PID control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 Proceedings of the Korea Automatic Control Conference, 11th (KACC); Pohang, Korea; 24-26 Oct. 1996
• /
• pp.263-266
• /
• 1996

A method to determine an optimal temperature trajectory that guarantees polymer products having controlled molecular weight distribution and desired values of molecular weight is presented. The coordinate transformation method and the optimal control theory are applied to a batch PMMA polymerization system to calculate the optimal temperature trajectory. Coordinate transformation method converts the original fixed-end-point, free-end-time problem to a free-end-point, fixed-end-time problem. The idea is that by making the reactor temperature track the optimal temperature trajectory one may be able to produce polymer products having the prespecified physical property in a minimum time. The on-line control experiments with the PID control algorithm have been conducted to establish the validity of the scheme proposed in this study. The experimental results show that prespecified polymer product could be obtained with tracking the calculated optimal temperature trajectory.

• 산업경영시스템학회지
• /
• 제38권3호
• /
• pp.14-20
• /
• 2015

It is important to understand psychological and physiological responses of occupants who seated in a chair in order to shape a comfortable indoor official environment. So it is needed to find out optimal seated conditions. The purpose of this study was to explore optimal condition of seat air conditioning control based on psychological or subjective responses (perceived temperature and comfort sensation) and physiological responses (heartrate variability; HRV). To do this, experimental conditions were designed by the difference of indoor temperature and seat air conditioning temperature. In the experiment 1, seven experimental conditions were designed with one control condition which was not used seat air conditioning system, and six experimental conditions which the difference of indoor temperature and seat air conditioning temperature ($-1^{\circ}C{\sim}-6^{\circ}C$). In the experiment 2, four experimental conditions were designed with one control condition and three experimental conditions ($-3^{\circ}C{\sim}-5^{\circ}C$). In addition, participants' psychological or subjective response was measured by CSV (comfort sensation vote) and PTS (perceived temperature sensitivity) as a psychological or subjective response, and heartrate variability was measured as a physiological response. As a result, in the experiment 1, it was reported that the optimal conditions of seat air conditioning control based on participants' psychological or subjective comfort were from $-3^{\circ}C$ to $-5^{\circ}C$ experimental conditions. In addition, in the experiment 2, it was reported that the optimal condition of seat air conditioning control based on participants' physiological comfort was $-4^{\circ}C$ experimental condition. These results suggested that seat air conditioning could affected to comfort sensation of occupants in an appropriate range, rather than unconditionally.

• 한국유기농업학회지
• /
• 제19권spc호
• /
• pp.6-8
• /
• 2011

In order to produce the organic foods in accord with international standard, organic seeds should be used in organic farming. This study was conducted to establish the stable production of organic seed of waxy com by examining the growing characteristics, seed yield, and the economy for seed production by organic farming. The optimal sowing timing for organic seed production of waxy com hybrid was within 10 days of the $1^{st}$ of May with yield of 88~90% of conventional seed production. The optimal planting density was 41,600 plants/ha ($80{\times}30$ cm) for organic seed production of waxy com. The weight of 100 seeds and seed productivity increased at the planting ratio of 2:1 mother plant:male plant. Growth and seed production were improved by removing male plant at 7~10 days after silking. Organic fertilizer (mixed oil cake) was applied at a rate of 4~6 Mg/ha before sowing. Black plastic mulching was used for weed control. In addition, sex pheromone trap and bio-control agents were used for safe pest control and low labour cost.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.118-125
• /
• 1998

Chip control is a major problem in automatic machining process, especially in finish turning operation. In this case, chip breaker is one of the important factors to be determined. As unbroken chips are grown. these deteriorate the surface roughness. and proces automation can not be carried out. In this study to get rid of chip curling problem while turning internal hole. optimal chip breaker is selected from the experiment. The experiment is planned with Taguchi's method that is based on the orthogonal arrary of design factors. From the response table. cutting speed, feedrate, depth of cut and tool geometry turn to be major factors affecting chip formation. Then, optimal chip breaker is selected. and this is verified as good enough for chip control from the experiment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.83-90
• /
• 1994

The container crane is still operated by skillfull human operators. So an automatic crane operation system is strongly required. In this paper, the digital control method is applied to position an anti-swing control for container crane. Two methods of digital optimal regulator control and digital redesign control are used for experiment. From these experimental results, it is respected that both methods can be applied effectively to an actual container crane operation.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제14권4호
• /
• pp.138-146
• /
• 2006

Recently, a technology based on the proportional integral (PI) control have grown rapidly owing to the needs for the robust capacity of the controllers from industrial building sectors. However, PI controller generally requires tuning of gains for optimal control when the outside weather condition changes. The present study presents the possibility of reinforcement learning (RL) control algorithm with PI controller adapted in the HVAC system. The optimal design criteria of RL controller was proposed in the environment chamber experiment and a theoretical analysis was also conducted using TRNSYS program.

• 대한인간공학회지
• /
• 제31권6호
• /
• pp.757-764
• /
• 2012

Objective: The aim of this study is to find the optimal values of sliding factors which influence the mechanical emotion of users when they use sliding type mobile phones. Background: There are various researches that study the emotion of using mobile phones. They focus the correlation between emotion words and design factors and use the commercial products by the subjects in the experiment. However, it has a limit in finding the optimal point of emotional factors because we can search the restricted values in the mass production of the products. Therefore, we will find the optimal points by realizing the full range of the user's mechanical emotion. Method: First, we need to get the detailed factors which can describe the mechanical emotion in sliding up and down the mobile phone. Next, we find the control factors by considering the correlation between the factors of the sliding emotion and the possibility of quantitative design. To find the optimal points on the control factors, we make a sliding evaluation system which can help users feel the sliding mechanical emotion by realizing control factors. Finally, we find the optimal points by doing the experiment the system being used. Results: The critical values of the factors which are the main variables of this study are Open Max Force and Dead point Ratio. The optimal point of the Open Max Force is 200~250g/f, and the Dead point Ratio is 40~50%. Conclusion: In this study we develop the sliding evaluation system to realize the control factors of the sliding type phone and find the optimal values of the critical factors. Application: The results can be used as the criteria for designing sliding type phone.

• 산업공학
• /
• 제24권4호
• /
• pp.396-407
• /
• 2011

We develop a cash management model in which firms face randomly occurred investment projects and retrieve investments upon the maturity of these projects. Using the Markov Decision Problem approach, we examine a control policy which dynamically adjusts the cash balance under the discounted cost criterion. The existence of an optimal policy is shown under some conditions. The optimal solution procedure is developed to find the optimal points and the optimal sizes for adjusting the cash balance. In numerical experiment, we investigate important structural properties of the optimal cash management policy.