• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.151-159
• /
• 2008

An efficient location registration scheme is essential to accommodate continuously increasing mobile subscribers and to offer a variety of multimedia services with good quality. In this study, we consider a distance-based registration scheme where the number of location areas varies on the basis of cell-by-cell, not of ring-by-ring, to analyze the optimal size of the location area. Using our proposed cell-by-cell distance-based registration scheme with random walk mobility model, we analyze a variety of circumstances to obtain the optimal number of cells for location area that minimizes total signaling traffic on radio channels. From our analysis results, we show that the optimal number of cells for location area is between 4 and 6 in most cases, and our cell-by-cell distance-based location registration scheme has less signaling traffic than optimal ring-by-ring distance-based location registration scheme where optimal distance threshold is 2 (thus the optimal number of cells for location area is 7).

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.1
• /
• pp.95-104
• /
• 2017

This paper deals with solution methods for discrete and multi-valued optimization problems. The objective function of the problem incorporates noise effects generated in case that fitness evaluation is accomplished by computer based experiments such as Monte Carlo simulation or discrete event simulation. Meta heuristics including Genetic Algorithm (GA) and Discrete Particle Swarm Optimization (DPSO) can be used to solve these simulation based multi-valued optimization problems. In applying these population based meta heuristics to simulation based optimization problem, samples size to estimate the expected fitness value of a solution and population (particle) size in a generation (step) should be carefully determined to obtain reliable solutions. Under realistic environment with restriction on available computation time, there exists trade-off between these values. In this paper, the effects of sample and population sizes are analyzed under well-known multi-modal and multi-dimensional test functions with randomly generated noise effects. From the experimental results, it is shown that the performance of DPSO is superior to that of GA. While appropriate determination of population sizes is more important than sample size in GA, appropriate determination of sample size is more important than particle size in DPSO. Especially in DPSO, the solution quality under increasing sample sizes with steps is inferior to constant or decreasing sample sizes with steps. Furthermore, the performance of DPSO is improved when OCBA (Optimal Computing Budget Allocation) is incorporated in selecting the best particle in each step. In applying OCBA in DPSO, smaller value of incremental sample size is preferred to obtain better solutions.

• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.327-338
• /
• 2009

In this paper, through an evaluation process conducted on several designs of mini-LIPCA (Lightweight Piezo-Composite curved Actuator), an optimal design of a mini-LIPCA has been proposed. Comparing with the LIPCA-C2, the design of the mini-LIPCA comes with reduced overall size and a thinner active layer. Since a variation in the number and lay-up of fiber composite layers may strongly affect the performance of the device, one is able to configure several designs of mini-LIPCA. The evaluation process is then followed in order to determine a configuration which characterizes the possibly optimal performance. That is, a design of a mini-LIPCA is said to be optimal if it is capable of producing a maximum out-of-plane displacement. The size of the LIPCA to be investigated was selected to be $10\;mm\;{\times}\;20\;mm$ in which the thickness of PZT plate is about 0.1 mm. The thickness of glass/epoxy and carbon/epoxy are about 0.09 mm and 0.1 mm, respectively. The evaluation process has been conducted thoroughly, i.e., analytical estimation, numerical approximation and the experimental measurement are all involved. Firstly, the design equation was used to calculate essential parameters of proposed lay-up configurations. Secondly, ANSYS, a commercial FEA package, was utilized to estimate displacement outputs of the actuators upon being excited. Finally, experimental measurements were able to verify the predicted results.

• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.529-532
• /
• 2001

Korean food waste, one of the abundantly available but environmentally problematic organic wastes in Korea, was utilized as solid-substrate by fungal strain Aspergillus niger ATcC 6275 for the production of enzymemixture containing amylase, cellulase and xylanase. The enzyme mixture can be used as high value-added animal feed. Solid-state fermentation method yielded a 84-fold enhancement in xylanase activity compared with submerged fermentation method. The effect of incubation period, incubation temperature, pH of medium, moisture content, inoculum size and enrichment of the medium with nitrogen and carbon sources were observed for optimal production of these enzymes The optimal amylase activity of 33.10 U/g, cellulase activity of 24.41 U/g, xylanase activity of 328.84 U/g were obtained at 8 days incubation with 50%(w/w) soy bean flake, with incubation temperature of $25^{\circ}C$, pH of 6.38, optimal moisture content of 55% and with inoculum size of $3.8{\times}10^6$spore/g. Enzyme activities were enhanced when ImM $CaSO_4$, 2% Malt extract and 2% galactose were added as mineral, nitrogen and carbon enrichment respectively.

• Journal of Korea Multimedia Society
• /
• v.19 no.11
• /
• pp.1891-1899
• /
• 2016

Recently food problem and crop disaster have been increased continuously because of the meteorological changes. These cause rising cost for crops continuously and irregularly. Some researchers have studied straight structure of device for hydroponics and plant factory previously to solve a fundamental part of these problems. However, there are several problems such as limited crop cultivation space, providing irregular nutrients for crops, and lack of monitoring interfaces. For them, we propose an optimal growth and development crops management system using light source tracking and recirculation of nutrient solution method to supply nutrient continuously based on IoT. In order to evaluate the performance of our system, we compared and analyzed in terms of two viewpoints, the tracking analysis for natural light source measurement and the growth of crops through artificial light, LED, respectively. We confirmed that the higher the duty ratio of LED, the larger the crop's size, particularly. As well as, for about 1 month, we compared with the existing natural light growing environment and that of our system. It was confirmed that the size of the crops grown through our system is about three times larger than that of natural light natural crops.

• Journal of Internet Computing and Services
• /
• v.4 no.6
• /
• pp.13-24
• /
• 2003

Grid technology requires use of geographically distributed resources from multiple domains. Resource monitoring services or tools consisting sensors or agents will run on many systems to find static resource information (such as architecture vendor, OS name and version, MIPS rate, memory size, CPU capacity, disk size, and NIC information) and dynamic resource information (CPU usage, network usage(bandwidth, latency), memory usage, etc.). Thus monitoring itself may cause system overhead. This paper proposes the optimal monitoring interval to reduce the cost of monitoring services and the dynamic monitoring interval to measure monitoring events accurately. By employing two features, we find out unnecessary system overhead is significantly reduced and accuracy of events is still acquired.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.9B
• /
• pp.1082-1091
• /
• 2011

Power-reduction techniques based on DVFS(Dynamic Voltage and Frequency Scaling) are crucial for lengthening operating times of battery powered mobile systems. This paper proposes an optimal DVFS scheduling algorithm for decoders with memory size limitation on display buffer, which is realistic constraints not properly touched in the previous works. Furthermore, we mathematically prove that the proposed algorithm is optimal in the limited display buffer and limited clock frequency model, and also can be used for feasibility check. Simulation results show the proposed algorithm outperformed the previous heuristic algorithms by 7% in average, and the performance of all algorithms using display buffers saturates at about 10 frame size.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.6
• /
• pp.602-614
• /
• 2016

It is necessary to develop an efficient optimization technique to perform optimum designs which have given design spaces, discrete design values and several design goals. As optimization techniques, direct search method and stochastic search method are widely used in designing of ship structures. The merit of the direct search method is to search the optimum points rapidly by considering the search direction, step size and convergence limit. And the merit of the stochastic search method is to obtain the global optimum points well by spreading points randomly entire the design spaces. In this paper, Pareto Strategy (PS) multi-objective function method is developed by considering the search direction based on Pareto optimal points, the step size, the convergence limit and the random number generation. The success points between just before and current Pareto optimal points are considered. PS method can also apply to the single objective function problems, and can consider the discrete design variables such as plate thickness, longitudinal space, web height and web space. The optimum design results are compared with existing Random Search (RS) multi-objective function method and Evolutionary Strategy (ES) multi-objective function method by performing the optimum designs of double bottom structure and double hull tanker which have discrete design values. Its superiority and effectiveness are shown by comparing the optimum results with those of RS method and ES method.

• KIEAE Journal
• /
• v.14 no.6
• /
• pp.105-110
• /
• 2014

The basic factors determining the amount of energy used in hospital buildings are weather conditions and building factors. But the real energy consumer is central plant equipment such as boilers and chillers that produce thermal energy for heating and cooling. Inaccurate decision of the primary equipment's size can cause a high initial-cost, an excessive equipment space, a wasted energy by low operation-efficiency and shortening of the machine's life. In this reason, the decision of optimal size for central plant equipment is very important. There are several factors for the decision such as an operation factor, a factor (equipment factor), piping losses and a simultaneous usage factor applied in the sizing process except a basic cooling load. But there is no standard method for applying those factors. Usually, factors are applied individually by an experience or custom of each engineer. In this study, the authors emphasize the meaning and the problem of those factors, examine them by analyzing factors which were applied to actual practices, and propose the recommendation value of safety, load, operation factors and application methods.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.563-568
• /
• 2013

The purpose of this study is to find the analytic solution for determining the optimal capacity (lot-size) of a batch-storage network to meet the finished product demand under infrequent shutdowns. Batch processes are bound to experience random but infrequent operating time losses. Two common remedies for these failures are duplicating another process or increasing the process and storage capacity, both of which are very costly in modern manufacturing systems. An optimization model minimizing the total cost composed of setup and inventory holding costs as well as the capital costs of constructing processes and storage units is pursued with the framework of a batch-storage network of which flows are susceptible to infrequent shutdowns. The superstructure of the plant consists of a network of serially and/or parallel interlinked batch processes and storage units. The processes transform a set of feedstock materials into another set of products with constant conversion factors.A novel production and inventory analysis method, the PSW (Periodic Square Wave) model, is applied. The advantage of the PSW model stems from the fact it provides a set of simple analytic solutions in spite of a realistic description of the material flow between processes and storage units. The resulting simple analytic solution can greatly enhance a proper and quick investment decision at the early plant design stagewhen confronted with diverse economic situations.