• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.37-49
• /
• 2014

This paper proposes a optimal process after analyzing the existing papers of software requirements engineering process. In analyzing it examines requirement pursuit management and origin, and considers a variety of starting points that draw requirement documents. Also, this paper considers carefully the multiple methods of stakeholder needs, problem analysis, processing priority of business modeling. From the analyzed result this paper proposes the best method that draws systematically the requirement documents. The proposed method can minimize the requirement changes, draw the higher project success ratio, and satisfy the customer.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.1
• /
• pp.89-96
• /
• 1998

The experiment was conducted with 120 barrows weaned at 21 days of age to estimate their lysine requirement weaned at 21 days of age when other important amino acids were fortified to get optimal ratio to lysine. The treatments were 1.15% (control), 1.25%, 1.35%, 1.45%, 1.55%, 1.65% total lysine in the diet. Based on the growth performance total lysine requirement of 21-day old pigs appears to be 1.45%. The lowest digestibilities of dry matter and crude fat were found in pigs fed 1.15% total lysine diet and the highest were found in pigs fed 1.65% total lysine diet with no significant differences among treatments. Nitrogen digestibility increased as the total lysine level increased up to 1.35% (p < 0.05) and remained relatively constant beyond 1.35%. However, the best nitrogen digestibility was observed in pigs fed 1.45% total dietary lysine. Gross energy, crude ash and phosphorus digestibilities did not differ due to the increase in total lysine level. The amounts of excreted dry matter and nitrogen differed significantly by the increase in lysine level up to 1.35% (p < 0.05), while phosphorus excretion was not influenced by the lysine level. Dry matter and nitrogen excretion were reduced by 13.6% and 18.4%, respectively, when 1.45% lysine was offered to the pigs compared to the those fed on 1.15% lysine diet. The amino acid digestibilities increased as the total lysine level increased up to 1.45% (p < 0.05), and remained constant beyond 1.45%. The lysine requirement for the pigs weighing 6 to 14 kg seems to be higher than the previous estimates and in order to reduce pollutant excretion the accurate nutrient requirement should be set and applied to the animal.

• Journal of Radiation Protection and Research
• /
• v.45 no.2
• /
• pp.88-94
• /
• 2020

Background: The International Commission on Radiological Protection (ICRP) has recently published report series on the occupational intakes of radionuclides (OIR) for internal dosimetry of radiation workers. In this study, the optimized monitoring program including the monitoring interval and the minimum detectable activity (MDA) of major radionuclides was suggested to perform the routine individual monitoring of internal exposure based on the ICRP OIR. Materials and Methods: The derived recording levels and the critical monitoring quantities were reviewed from international standards or guidelines by the International Atomic Energy Agency (IAEA), the International Organization for Standardization (ISO), and the European Radiation Dosimetry Group (EURADOS). The OIR data viewer provided by ICRP was used to evaluate the monitoring intervals and the MDA, which are derived from the reference bioassay functions and the dose coefficients. Results and Discussion: The optimal monitoring intervals were determined taking account of two requirement conditions on the potential intake underestimation and the MDA values. The MDA requirement values of the selected radionuclides were calculated based on the committed effective dose from 0.1 mSv to 5 mSv. The optimized routine individual monitoring program was suggested including the optimal monitoring intervals and the MDA requirements. The optimal MDA values were evaluated based on the committed effective dose of 0.1 mSv. However, the MDA can be adjusted considering the practical operation of the routine individual monitoring program in the nuclear facilities. Conclusion: The monitoring intervals and the MDA as crucial factors for the routine monitoring were described to suggest the optimized routine individual monitoring program of the occupational intakes. Further study on the alpha/beta-emitting radionuclides as well as short lived gamma-emitting nuclides will be necessary in the future.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.1
• /
• pp.55-67
• /
• 2010

Decision problem called an optimal release policies, after testing a software system in development phase and transfer it to the user, is studied. The applied model of release time exploited infinite non-homogeneous Poisson process. This infinite non-homogeneous Poisson process is a model which reflects the possibility of introducing new faults when correcting or modifying the software. The failure life-cycle distribution used generalized gamma type distribution which has the efficient various property because of various shape and scale parameter. Thus, software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement becomes an optimal release policies. In a numerical example, after trend test applied and estimated the parameters using maximum likelihood estimation of inter-failure time data, estimated software optimal release time.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.1
• /
• pp.21-25
• /
• 1996

In this paper we suggest a general purpose RNN training algorithm which is derived on the optimal control concepts and variational methods. First, learning is regared as an optimal control problem, then using the variational methods we obtain optimal weights which are given by a two-point boundary-value problem. Finally, the modified gradient descent algorithm is applied to RNN for on-line training. This algorithm is intended to be used on learning complex dynamic mappings between time varing I/O data. It is useful for nonlinear control, identification, and signal processing application of RNN because its storage requirement is not high and on-line learning is possible. Simulation results for a nonlinear plant identification are illustrated.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1548-1553
• /
• 2012

The important requirement for microgrid operation is to meet the balance between supply and demand. To meet, Combined Heat and Power (CHP) generation should be considered in microgrid scheduling. CHP generation is economical on the side of a consumer because it products heat and power. Therefore, it is high efficient. This paper presents a mathematical model for optimal microgrid operation including CHP generation using the optimal ratio of heat and power due to demand. The objective function and constraints are modeled by linear program (LP). Through the case study, the validation of the proposed model is shown.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.1
• /
• pp.11-19
• /
• 1994

An optimal design for Gifford-McMahon/Joule-Thomson(GM-JT) refrigerators was performed by a numerical method. The design goal was to meet the cooling requirement for MRI systems, which was 3 Watt at 4 K. A general cycle analysis program was written to calculate the cooling capacity of the GM-JT refrigerators for the givenstage GM refrigerator. The program was executed for a specific refrigerator with various design parameters. The optimal values for the maximum cooling were found for the sizes of the heat exchangers, the mass flow rate of helium, and the compression pressure.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.162-169
• /
• 1998

Lacking for the skilled grinding operator possessed of the experiential knowledges in machine shop, there is the just requirement which includes the establishment of the optimal grinding conditions. Accordingly, we attemt to develope the selection system of optimal grinding conditions such as workpiece velocity, depth of cut and wheel velocity and to add the trouble shooting system by means of the neural network. Those systems are robust to the each machine error and environmental unstable state. In addition. we produce the loaming process that is progressed with additional data modified by skilled operators, and excluding is advanced to similarity of input data.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.9 no.2
• /
• pp.1-10
• /
• 2013

In this paper, make a study decision problem called an optimal release policies after testing a software system in development phase and transfer it to the user. In the course of correcting or modifying the software, finite failure non-homogeneous Poisson process model, presented and was proposed release policies of the life distribution, half-logistic and log-logistic distributions model which used to an area of reliability because of various shape and scale parameter. In this paper, discuss optimal software release policies which minimize a total average software cost of development and maintenance under the constraint of satisfying a software reliability requirement. In a numerical example, the parameter estimation using maximum likelihood estimation of failure time data make out, and software optimal release time was estimated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.12
• /
• pp.5347-5360
• /
• 2016

In decode and forward relay systems, choosing the duplex mode is an important factor to the performance. To satisfy the performance requirement, self-interference must be mitigated for the full-duplex relay (FDR), and the resource efficiency must be increased for the half-duplex ratio (HDR). Therefore, if a wise scheme to consider these two factors exists, decode and forward relay systems are used more effectively. This study proposes a new duplex selection scheme for decode and forward relay systems. The proposed duplex selection scheme chooses the better duplex mode according to the channel statistical conditions with optimal power allocation. The simulation results show that the proposed duplex scheme with optimal power allocation has lower outage probability than the FDR and the HDR.