• 설비공학논문집
• /
• 제24권5호
• /
• pp.428-432
• /
• 2012

In the waste collection system, living waste is collected through the piping network. There are many confluent pipes in a piping network. These confluent pipes were often clogged up with waste. The optimal configuration of the confluent pipes has been defined by the design guide. However, nobody know how this design guide were determined. Therefore, in this paper, we found the design data for the confluent pipe configuration in order to avoid the waste clogging in a piping network. The distance between connected point on the confluent pipes should be longer than the previous design guide.

• 한국유체기계학회 논문집
• /
• 제13권3호
• /
• pp.54-58
• /
• 2010

The pneumatic waste collection system, which is a complete solution for solving the waste collection problems, are constructed in many countries all over the world. However, research data for piping network design are insufficient. In this paper the pressure losses of the straight and curved pipes, pipe junctions are obtained using the numerical method in order to investigate the optimal pipe network design for the waste collection system. As an experimental result, the length of 1.8 meter is the reasonable for the radius of curvature of a curved pipe and the angle of 30 degree is suitable for confluent pipe.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2794-2797
• /
• 2008

The pneumatic waste collection system, which is a complete solution for solving the waste collection problems, are constructed in many countries all over the world. However, research data for piping network design are insufficient. In this paper the pressure losses of the straight and curved pipes, pipe junctions are obtained using the numerical method in order to investigate the optimal pipe network design for the waste collection system.

• 한국주거학회논문집
• /
• 제17권2호
• /
• pp.11-18
• /
• 2006

For the more comfortable thermal environment in residential buildings, it was necessary for variable components like as automatic flow limiting valves and/or balancing valves in hydronic system. And, these components had an effect on flow-rate and pressure inside pipe. In this case, the incompatibility between the design for the heating system and the selection of equipment was the causes of several problems in heating pipe network. In this study, we peformed measurements and analyses of flow rate and pressure inside pipe for radiant floor heating in residential buildings through field surveys and experiments in order to find out the actual conditions and problems. On the basis of this, we suggested the approach for the optimal flow-rate and pressure maintaining inside pipe in individual heating system.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제4권2호
• /
• pp.85-92
• /
• 2016

LNG선의 발라스트 탱크에 해수를 유입할 때 해수에 부유하고 있는 해저면의 머드 입자가 탱크 안으로 유입되고 탱크내에 침전되는 문제가 발생한다. 탱크에서 해수를 배출 할 때에 침전된 머드를 함께 제거할 수 있도록 발라스트 탱크 내에 머드 플러싱 시스템을 적용하였다. 본 연구에서는 플러싱 시스템의 머드 제거 효과를 평가하기 위해 입자 크기 분석기를 통해 머드의 입자 크기를 측정 하였으며, 입자 크기와 전단 응력의 관계를 바탕으로 수치해석을 통해 머드의 부유 성능을 평가하였다. 탱크내 머드 플러싱 배관 시스템을 최적화하여 탱크내 머드 부유 성능을 극대화하였다.