• IE interfaces
• /
• v.20 no.2
• /
• pp.204-215
• /
• 2007

This paper addresses vehicle routing planning in freight container transportation systems where a number of loaded containers are to be delivered to their destination places. The system under consideration is static in that all transportation requirements are predetermined at the beginning of a planning horizon. A two-phased procedure is presented for freight container transportation. In the first phase, the optimal model is presented to determine optimal total time to perform given transportation requirements and the minimum of number of vehicles required. Based on the results from the optimal model, in the second phase, ASA(Accelerated Simulated Annealing) algorithm is presented to perform all transportation requirements with the least number of vehicles by improving initial vehicle routing planning constructed by greedy method. It is found that ASA algorithm has an excellent global searching ability through various experiments in comparison with existing methods.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.567-570
• /
• 2007

Cell gap dependence on anisotropic phase separation was studied. The results showed that the morphology of phase separation depended on cell gap and material parameters. With numerical simulation and experiments, the optimal range of cell gap in the formation of polymer layer and liquid crystal was suggested for given material parameters.

• Journal of Power Electronics
• /
• v.5 no.2
• /
• pp.160-165
• /
• 2005

In a parallel operation of UPS, there are two types of circulating currents between UPS. One is the low order circulating current with a fundamental frequency caused by the amplitude and phase differences of UPS output voltages, and the other is the harmonic circulating current with PWM switching frequency caused by non-synchronized PWM waveforms among UPS. The elimination of the low order circulating current is essential for optimal load sharing in parallel operations of UPS, which can be accomplished by the phase and magnitude control at each UPS. The harmonic circulating current may cause troubles and deteriorate in performance of the controller for optimal load sharing in parallel operation of UPS. This paper presents a PWM synchronizing method to eliminate the harmonic circulation current in parallel operation of UPS. The effectiveness of the proposed scheme has been investigated and verified through experiments by a 50kVA UPS.

• Journal of electromagnetic engineering and science
• /
• v.5 no.1
• /
• pp.36-42
• /
• 2005

In this paper, the optimal position of optical phase conjugator(OPC) excellently compensating distorted WDM channels with initial frequency chirp due to both chromatic dispersion and self phase modulation(SPM) is numerically investigated. Highly-nonlinear dispersion shifted fiber(HNL-DSF) is used as a nonlinear medium of OPC in order to widely compensate WDM signal band. It is confirmed that if the OPC position was shifted from mid-way of total transmission length dependence on the initial frequency chirp as well as modulation format and fiber dispersion coefficient, it is possible to cancel the performance degradation owing to the initial frequency chirp. Using proposed configuration, it is possible to remove all in-line dispersion compensator, reducing span losses and system costs in the long-haul broadband WDM systems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.286-292
• /
• 2008

Transverse flux machine (TFM) has been developed to drive a machine of large input power at low-speed. However, it has complicated structure and large torque ripple due to its inherent structure In this paper the characteristics of torque of a rotatory two-phase TFM are analyzed by using the 3-dimensional finite to element method and optimal design. This research shows that one of the effective design variables is the skew angle of permanent magnet. The skew angles of permanent magnet are optimized by using a Progressive Quadratic Response Surface Method (PQRSM). It also shows that the proposed optimal skew magnet not only increases average torque but also decreases torque ripple of a rotatory two-phase TFM.

• Journal of the military operations research society of Korea
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2004

In this paper, we propose a new data-mining-based methodology for military occupational specialty assignment. The proposed methodology consists of two phases, feature selection and man-power assignment. In the first phase, the k-means partitioning algorithm and the optimal variable weighting algorithm are used to determine attribute weights. We address limitations of the optimal variable weighting algorithm and suggest a quadratic programming model that can handle categorical variables and non-contributory trivial variables. In the second phase, we present an integer programming model to deal with a man-power assignment problem. In the model, constraints on demand-supply requirements and training capacity are considered. Moreover, the attribute weights obtained in the first phase for each specialty are used to measure dissimilarity. Results of a computational experiment using real-world data are provided along with some analysis.

• Journal of Korea Society of Industrial Information Systems
• /
• v.10 no.4
• /
• pp.16-25
• /
• 2005

In this paper, we proposed a novel algorithm combined simulated annealing and genetic algorithms for designing optimal binary phase computer generated hologram. In the process of genetic algorithm searching by block units, after the crossover and mutation operations, simulated annealing algorithm searching by pixel units is inserted. So, the performance of BPCGH was improved. Computer simulations show that the proposed combined iterative algorithm has better performance than the simulated annealing algorithm in terms of diffraction efficiency

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.5
• /
• pp.415-421
• /
• 2014

This study proposes a model-based predictive control for interleaved multi-phase DC/DC converters. The power values necessary to adjust the output voltage in the succeeding are predicted using a converter model. The output power is controlled by selecting the optimal duty cycle. The proposed method does not require controller loops and modulators for converter switching. This method can control the converter by calculating the optimal duty cycle, which minimizes the error between the reference and actual output voltage. The effectiveness of the proposed method is verified through simulations and experiments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.1003-1011
• /
• 2009

Transverse flux machine(TFM) has been developed to drive a machine of large input power at low-speed. However, it has complicated structure and large torque ripple due to its inherent structure. In this paper the characteristics of torque of a rotatory two-phase TFM are analyzed by using the 3-dimensional finite element method and optimal design. This research shows that one of the effective design variables is the skew angle of permanent magnet. The skew angles of permanent magnet are optimized by using a genetic algorithm. It also shows that the proposed optimal skew magnet not only increases average torque but also decreases torque ripple of a rotatory two-phase TFM.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.149-155
• /
• 2006

A technique used to induce maximum oscillating voltage in the BJT Clapp VCO is presented. The technique finds the optimal feedback capacitance values resulting in the largest oscillating signal swing across the resonator at a given bias state and the VCO's center frequency. By doing so, the presented technique attains the lowest phase noise which the BJT Clapp VCO can have. An analysis of the measurement results of the fabricated oscillators has verified that the VCO with the optimal feedback capacitance values actually exhibits the lowest phase noise.