• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.205-209
• /
• 2001

A study to analyze and solve problems of multi wire installation duct experiment has presented in this paper We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.173-177
• /
• 2002

A study to analyze and solve problems of multi wire installation duct experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.439-440
• /
• 2006

• 대한전자공학회논문지SD
• /
• 제40권5호
• /
• pp.298-311
• /
• 2003

Iterative Fourier transform algorithm (IFTA)은 회절광학소자 (DOE)의 위상 분포를 구하기 위한 반복적 수치 해석 알고리즘으로서 회절광학소자의 위상 분포는 반복 과정을 통하여 국소 최적해로 수렴하게 된다. Ink의 수렴은 위상 분포 초기치, 관측면에서의 자유도의 허용 범위 및 알고리즘에 내재된 매개 변수들의 설정 값에 영향을 받는다. 본 논문에서는 IFTA의 내부적 매개 변수인 완화 변수(relaxation parameter)가 IFTA의 수렴에 미치는 영향을 분석하고 이를 토대로 보다 정확한 최적화 해를 얻기 위한 유전 알고리즘과 IFTA의 하이브리드 알고리즘을 제안한다.

• Steel and Composite Structures
• /
• 제52권2호
• /
• pp.237-248
• /
• 2024

In order to make the dynamic analysis and design of improved composite beam with corrugated steel web (CBGSCC) bridge more efficient and economical, the parametric self-cyclic analysis model (SCAM) was written in Python on Anaconda platform. The SCAM can call ABAQUS finite element software to realize automatic modeling and dynamic analysis. For the CBGSCC bridge, parameters were set according to the general value range of CBGSCC bridge parameters in actual engineering, the SCAM was used to calculate the large sample model generated by parameter coupling, the optimal value range of each parameter was determined, and the sensitivity of the parameters was analyzed. The number of diaphragms effects weakly on the dynamic characteristics. The deck thickness has the greatest influence on frequency, which decreases as the deck thickness increases, and the deck thickness should be 20-25 cm. The vibration frequency increases with the increase of the bottom plate thickness, the web thickness, and the web height, the bottom plate thickness should be 17-23mm, the web thickness should be 13-17 mm, and the web height should be 1.65-1.7 5 m. Web inclination and Skew Angle should not exceed 30°, and the number of diaphragms should be 3-5 pieces. This method can be used as a new method for structural dynamic analysis, and the importance degree and optimal value range of each parameter of CBGSCC bridge can be used as a reference in the design process.

• Journal of information and communication convergence engineering
• /
• 제12권4호
• /
• pp.215-220
• /
• 2014

We consider quantization optimized for distributed estimation, where a set of sensors at different sites collect measurements on the parameter of interest, quantize them, and transmit the quantized data to a fusion node, which then estimates the parameter. Here, we propose an iterative quantizer design algorithm with a weighted distance rule that allows us to reduce a system-wide metric such as the estimation error by constructing quantization partitions with their optimal weights. We show that the search for the weights, the most expensive computational step in the algorithm, can be conducted in a sequential manner without deviating from convergence, leading to a significant reduction in design complexity. Our experments demonstrate that the proposed algorithm achieves improved performance over traditional quantizer designs. The benefit of the proposed technique is further illustrated by the experiments providing similar estimation performance with much lower complexity as compared to the recently published novel algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1172-1174
• /
• 2002

An adaptive fuzzy P + ID controller for variable speed operation of BLDC motor drives is presented in this paper. Generally, a conventional PID controller is most widely used in industry due to its simple control structure and ease of design. However, the PID controller suffers from the electrical machine parameter variations and disturbances. To improve the tracking performance for parameter and load variations, the controller proposed in this paper is constructed by using an adaptive fuzzy logic controller in place of the proportional term in a conventional PID controller. For implementing this controller, only one additional parameter has to be adjusted in comparison with the PID controller. An adaptive fuzzy controller applied to proportional term to achieve robustness against parameter variations has simple structure and computational simplicity. The controller based on optimal fuzzy logic controller has an self-tuning characteristics with clustering. Computer simulation results show the usefulness of the proposed controller.

• 동력기계공학회지
• /
• 제5권3호
• /
• pp.64-72
• /
• 2001

This paper describes an optimal design technology in a segment type vertical guide bearing for vertical rotating machinery. Segment type vertical guide bearings have widely used for vertical rotating machinery, however bearing problems, such as excessive vibration and temperature rise, frequently take place in the actual machine. Such excessive vibration magnitude and/or abnormal bearing metal temperature rise result in serious damage and economic losses. Thus the segment type vertical guide bearing should be designed to get optimal characteristics in order to maintain stable operation without bearing failure due to abnormal vibration and/or abnormal bearing metal temperature. The preload ratio is the most important parameter in designing the segment type vertical guide bearing. Because adjustment of the bearing preload by changing the bearing clearance could easily control both the bearing stiffness and the cooling effect. In the paper, the influence of the preload effects on the bearing metal temperature and the bearing stiffness has been investigated both theoretically and experimentally in order to find out an optimum preload ratio. Results show that the segment type vertical guide bearing has an optimum preload ratio at which the bearing stiffness reaches a masimum value while the bearing metal temperature is minimized.

• 전산구조공학
• /
• 제10권2호
• /
• pp.233-242
• /
• 1997

이 논문은 연속보의 동적 최적설계에 관한 연구이다. 본 연구에서는 연속보의 근사적인 최적제원을 결정하기 위하여 컴퓨터 프로그램의 실행결과를 이용한 기법을 이용하였다. 경간길이, 질량 및 휨강성이 변화하는 연속보의 자유진동해석과 이동 집중하중이 작용하는 경우 동적응답해석을 실행할 수 있는 컴퓨터 프로그램을 개발하였다. 모형실험 결과와 이론적인 해석결과가 잘 일치하여 해석결과의 타당성을 검증할 수 있었다. 설계효율을 나타내기 위하여 최대 동적응력, 경간사이의 응력차이, 이동 집중하중이 작용하는 점에서의 rms 처짐 및 전체지간의 총질량 등 4가지의 무차원 변수들의 선형결합으로 이루어지는 최적함수를 정의하였다. 3경간 연속보에 대한 해석결과 개략적인 최적제원을 갖는 연속보로 설계하는 경우 등간격의 등단면 연속보에 비해 설계효율을 개선할 수 있음을 알 수 있었다.

• 품질경영학회지
• /
• 제24권4호
• /
• pp.44-58
• /
• 1996

This paper presents optimal accelerated life test plans with different censoring times for exponential, Weibull, and lognormal lifetime distributions, respectively. For an optimal plan, low stress level, proportion of test units allocated and censoring time at each stress are determined such that the asymptotic variance of the maximum likelihood estimator of a certain quantile at use condition is minimized. The proposed plans are compared with the corresponding optimal plans with a common censoring time over range of parameter values. Computational results indicate that those plans are statistically optimal ones in terms of accuracy of estimator when total censoring times of two plans are equal.