• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.103-116
• /
• 1996

This study was performed to observe the bacterial adhesion and penetration to e-PTFE membrane following guided tissue regeneration(GTR) procedure and to evaluate the association of the membrane exposure and bacterial contamination with the clinical outcome. For the study, ten infrabony defects in 9 patient were treated by mucoperiosteal flap operation including placement of the e-PTFE membrane. The treated teeth were monitored weekly for the membrane exposure, gingival recession and gingival inflammation. The membranes were retrieved after 4 to 6 weeks, examined by SEM for bacterial contamination and adherent connective tisue elements, and observed under LM for the bacterial penetration into membrane. Three months postsurgery, the defect sites were clinically reexamined for the changes in attachment level and probing depth. Comparison of the ultrastuctural findings and clinical outcome revealed that extent of membrane exposure and bacterial contamination of the membrane was inversely associated with clinical attachment gain. From this finding, the extent of membrane exposure and the bacterial contamination on the apical portion of the e-PTFE membrane at the time of removal seemed to be a critical determinant on the clinical outcome of GTR and the membrane exposure needs to be controlled for optimal results.

• 전기학회논문지
• /
• 제62권12호
• /
• pp.1678-1687
• /
• 2013

This paper describes a prototype of 3-phase 3.3kV/220V 6kVA modular semiconductor transformer developed in the lab for feasibility study. The developed prototype is composed of three single-phase units coupled in Y-connection. Each single-phase unit with a rating of 1.9kV/127V 2kVA consists of a high-voltage high-frequency resonant AC-DC converter, a low-voltage hybrid-switching DC-DC converter, and a low-voltage hybrid-switching DC-AC converter. Also each single-phase unit has two DSP controllers to control converter operation and to acquire monitoring data. Monitoring system was developed based on LabView by using CAN communication link between the DSP controller and PC. Through various experimental analyses it was verified that the prototype operates with proper performance under normal and sag condition. The system efficiency can be improved by adopting optimal design and replacing the IGBT switch with the SiC MOSFET switch. The developed prototype confirms a possibility to build a commercial high-voltage high-power semiconductor transformer by increasing the number of series-connected converter modules in high-voltage side and improving the performance of switching element.

• 한국지반환경공학회 논문집
• /
• 제10권5호
• /
• pp.33-39
• /
• 2009

본 연구는 정읍시에서 배출되는 하수 슬러지, 축산 분뇨, 음식물 쓰레기를 대상으로 Pilot Scale($100m^3$) 초고온 호기성 퇴비화 공정에서의 복합 악취 및 12개 지정 악취물질을 평가하였다. 각각의 대상 물질은 종균과 혼합하였고 1차 50일, 2차 60일 기간동안 운전하였다. 호기성 퇴비화가 진행됨에 따라 1차, 2차 퇴비화공정에서 온도가 상승하여 약 $90{\sim}95^{\circ}C$가 되었다. 악취 분석을 위한 시료는 1차의 경우 퇴비상부에서, 2차의 경우 Pilot Plant 경계지점에서 채취하였다. 지정 악취 물질 12개 항목의 기기 분석에서 악취의 주요 원인으로는 암모니아, 메틸머캅탄, 디메틸다이설파이드, 트리메틸아민이었다. 초기 복합악취의 농도는 퇴비화 공정이 끝난 후의 농도보다 높았지만 규제기준을 넘지 않았다. 초고온 호기성 퇴비화 공정에서는 적절한 교반시점과 발효 온도가 악취 발생의 중요한 인자라고 판단된다.

• 대한토목학회논문집
• /
• 제3권2호
• /
• pp.31-44
• /
• 1983

본연구(本硏究)에서는 OR이나 응용수학분야(應用數學分野)에서 개발(開發)된 기하적(幾何的) 계획법(計劃法)을 탄성이론(彈性理論)에 의(依)한 트러스구조물(構造物)의 최적화(最適化)에 도입(導入)하여 최적화(最適化) 알고리즘으로 적용(適用)하였다. 최적화(最適化) 문제형성(問題形成)에서 목적함수(目的函數)는 중량함수(重量函數), 제약조건식(制約條件式)으로는 축응력(軸應力), 좌굴응력(挫屈應力), 변위(變位), 설계변수(設計變數) 한계제약조건식(限界制約條件式)을 취하였다. 트러스구조물(構造物)의 최적설계(最適設計)에 이 알고리즘을 적용(適用)할 수 있는지의 적용가능성(適用可能性)과 그 효율성(効率性)을 검토(檢討)하기 위하여 절점수(節點數), 부재수(部材數), 극하조건수(戟荷條件數), 설계변수(設計變數)의 초기치(初期値)를 달리한 4종류(種類)의 트러스구조물(構造物)의 최적설계(最適設計)를 실시(實施)하고 그 결과(結果)를 분석(分析)하였다. 연구결과(硏究結果) 최적설계과정(最適設計過程)의 반복회수(反復回數)를 중심(中心)으로 분석(分析)할 때 본연구(本硏究)의 알고리즘은 1~7회(回) 반복과정(反復過程)만으로 Oscillation현상(現像)없이 안정성(安定性)있게 최적해(最適解)에 수감(收歛)하고 있어 본연구(本硏究)의 방법(方法)도 반복회수(反復回數)만을 비교(比較)할 경우 효율적이라는 결론(結論)을 얻었다.

• 대한기계학회논문집A
• /
• 제29권9호
• /
• pp.1235-1242
• /
• 2005

A district heating(DH) system supplies environmentally-friend heat and is appropriate for reduction of energy consumption and/or air pollutions. The DH transmission pipe, composed of supply and return pipes, has been used to transmit the heat and prevent heat loss during transportation. The two types of pipes are operated at a temperature of $75\~115^{\circ}C\;and\;40\~65^{\circ}C$, respectively, with an operating pressure of less than 1.568MPa. The objectives of this paper are to systematize data processing of transition temperature and investigate its effects on fatigue life of DH pipes. For the sake of this, about 5 millions temperature data were measured during one year at ten locations, and then available fatigue lift estimation schemes were examined and applied to quantify the specific thermal fatigue life of each pipe. As a result, a relational database management system as well as reliable fatigue lift evaluation procedures is established for Korean DH pipes. Also, since the prototypal evaluation results satisfied both cycle-based and stress-based fatigue criteria, those can be used as useful information in the future fer optimal design, operation and energy saving via setting of efficient condition and stabilization of water temperature.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권8호
• /
• pp.893-904
• /
• 2013

NSGA-II와 함께 크리깅 메타모델기반 다목적최적설계 전략을 3차원 CFD 시뮬레이션을 통해 액셜 피스톤 펌프의 밸브 플레이트 형상을 최적화하는데 적용하였다. 펌프의 압력 변동을 저감하고 수력 효율을 최대화하기 위한 최적설계 과정은 두 단계, 즉 (1) 밸브 플레이트 상의 6개 형상 설계 변수를 선정하고 각 설계변수의 변화에 따른 CFD 해석을 수행하며, (2) CFD 데이터를 이용한 NSGA-II에 기반한 다목적최적설계 접근방식으로 최소 맥동 압력과 펌프 효율 설계에 대해 파레토 프론트를 평가하는 것으로 구성된다. 이들 결과로부터 최소 맥동 압력을 가지며 액셜 피스톤 펌프의 목표 효율에 도달하는 최적 절충해를 선택할 수 있었다.

• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.194-200
• /
• 2009

The extruder type is classified as screw type and non-screw type in terms of the extrusion method. The screw type extruder, which is the most frequently used, is classified as the single screw extruder and the multi-screw extruder. They are classified as vertical type and horizontal type in terms of structure; and those for compounding and for forming in terms of function. The single screw extruder is a universal extruder, most of which is suitable for the extrusion forming of thermoplastic resin. The multi-screw(two-screw, three-screw and four-screw) extruder can increase the extrusion power using the engagement of the screw flank. The single screw extruder does not have a good mixing ratio of the raw material and stable extrusion power, while it has low construction cost and operation cost. In this study, the single screw extruder, which has many weak points compared with the multi-screw extruder, was studied. There have been many studies on the single screw extruder, and they led to its significant development. The existing study method, however, had complex analysis processes and required much time. In this study, the CFD was applied to the performance test and analysis of the extruder, and the optimal design condition of the extrusion power for the screw and die of the single screw extruder was found by comparing the analysis results with the actual performance measurement of the single screw extruder.

• 대한기계학회논문집A
• /
• 제40권11호
• /
• pp.963-970
• /
• 2016

본 연구는 가속페달에 반력을 생성하여 운전자의 경제운전을 유도하기 위한 에코페달의 설계와 성능 검증을 다룬다. 에코페달의 제어로직은 사전에 설정된 "허용가속도"를 바탕으로 현재 속도에서 허용되는 연료소비량을 정하고 이를 실제 연료소비량과 비교하여 에코페달의 작동을 결정하는 방식을 제안하였다. 폐달 반력은 운전자가 충분히 인지하되 불쾌감을 느끼지 않아야 하며, 차량의 정상 거동에 간섭이 없어야 한다. 스텝형과 램프형 반력 등과 같이 페달 답력이 급속하게 증가하는 형태의 반력은 반력 작동이 멈춘 직 후 운전자의 답력에 의한 급작스러운 가속 현상 때문에 적용이 어렵고, 이러한 문제가 없는 진동형 반력을 채택하였다. 진동형 반력의 주파수, 진폭, 작동시간은 운전자의 주관적 평가와 연비 향상 효과를 고려하여 결정하였다. 본 연구에서 제안된 에코페달을 차량에 장착하여 주행시험을 실시한 결과 고속도로와 시내주행에서 각각 13%와 15%의 연비향상 효과를 보여주었다.

• Wind and Structures
• /
• 제31권4호
• /
• pp.373-380
• /
• 2020

For large-scale 5MW offshore wind turbines, the discrete equation of fluid domain and the motion equation of structural domain with geometric nonlinearity were built, the three-dimensional modeling of the blade considering fluid-structure interaction (FSI) was achieved by using Unigraphics (UG) and Geometry modules, and the numerical simulation and the analysis of the vibration characteristics for wind turbine structure under rotating effect were carried out based on ANSYS software. The results indicate that the rotating effect has an apparent effect on displacement and Von Mises stress, and the response and the distribution of displacement and Von Mises stress for the blade in direction of wingspan increase nonlinearly with the equal increase of rotational speeds. Compared with the single blade model, the blade vibration period of the whole machine model is much longer. The structural coupling effect reduces the response peak value of the blade displacement and Von Mises stress, and the increase of rotational speed enhances this coupling effect. The maximum displacement difference between two models decreases first and then increases along wingspan direction, the trend is more visible with the equal increase of rotational speed, and the boundary point with zero displacement difference moves towards the blade root. Furthermore, the Von Mises stress difference increases gradually with the increase of rotational speed and decreases nonlinearly from the blade middle to both sides. The results can provide technical reference for the safe operation and optimal design of offshore wind turbines.

• 성인간호학회지
• /
• 제28권1호
• /
• pp.43-52
• /
• 2016

Purpose: The aim of this study was to identify demographic, clinical, physical, and psychosocial factors affecting discharge delay in lumbar spinal surgery patients who were treated according to a critical pathway. Methods: A sample of 170 patients with lumbar spinal surgery agreed to participate in the study, between April 1, 2014 and August 30, 2015. Data were analyzed by mean, standard deviation, t-test, ${\chi}^2$-test, ANCOVA, and logistic regression analysis using SPSS 22.0 program. Results: Approximately fifty-nine percent of the participants was delayed discharge. On logistic regression analysis, female gender (OR=2.63, 95% CI=1.40~4.94), age (OR=1.03, 95% CI=1.01~1.05), spondylolisthesis (OR=4.49, 95% CI=1.90~10.61), and spinal fusion operation (OR=4.14, 95% CI=1.89~9.05) were significant factors predicting discharge delay of the participants. However, discharge delay was not related with pain, physical function, depression, or family support. Conclusion: An analysis of discharge delay may assist in evaluating and revising critical pathway for optimal care. In addition, nurses need to understand the factors affecting discharge delay of the given population who were treated according to a critical pathway.