• 대한기계학회논문집B
• /
• 제28권10호
• /
• pp.1231-1237
• /
• 2004

Determination of geometric design parameters of a second-throat type annual supersonic ejector is described. Tested geometric parameters were primary nozzle area ratio, cross-sectional area of second-throat, L/D ratio of second-throat and primary flow injection angle. Varying these four geometric parameters, we build a test matrix made of 81 test conditions, and experimental apparatus was fabricated to accommodate them. For each test condition, the stagnation pressure of primary flow and the static pressure of the secondary flow were measured simultaneously along with their transition to steady operation and finally to unstarting condition. Comparing the performance curve of every case focused on starting pressure, the unstarting pressure and the minimum secondary pressure, we could derive correlations that the parameters have on the performance of the ejector and presented the optimal design method of the ejector. Additional experiments were carried out to find effects of temperature and mass flow rate of the secondary flow.

• 전기전자학회논문지
• /
• 제13권2호
• /
• pp.175-180
• /
• 2009

본 논문에서는 3[kW]급 태양광 발전시스템의 환경 조건 및 시스템 파라미터들을 고려하여 태양광어레이와 태양광인버터를 시뮬레이션 하고 태양광어레이의 설치에 따른 최적 조건과 성능을 분석을 하여 태양광 발전시스템의 최적 설계를 구현할 수 있도록 한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.852-853
• /
• 2008

This paper proposes an optimal design method for the shape optimization of the permanent magnets (PM) of an in-wheel permanent magnet synchronous motor (PMSM) to reduce the cogging torque considering a total harmonic distortion (THD) and a root mean square (RMS) value of back-EMF. In this method, the Kriging model based on a design of experiment (DOE) is applied to interpolate the objective function in the spaces of design parameters. The optimal design method for the PM of an in-wheel PMSM has to consider multi-variable and multi-objective functions. The developed design method is applied to the optimization for the PM of an in-wheel PMSM.

• International Journal of Control, Automation, and Systems
• /
• 제6권4호
• /
• pp.596-606
• /
• 2008

In this paper, we present a co-design methodology of dynamic optimal network-bandwidth allocation (ONBA) and adaptive control for networked control systems (NCSs) to optimize overall control performance and reduce total network-bandwidth usage. The proposed dynamic co-design strategy integrates adaptive feedback control with real-time scheduling. As part of this co-design methodology, a "closed-loop" ONBA algorithm for NCSs with communication constraints is presented. Network-bandwidth is dynamically assigned to each control loop according to the quality of performance (QoP) information of each control loop. As another part of the co-design methodology, a network quality of service (QoS)-adaptive control design approach is also presented. The idea is based on calculating new control values with reference to the network QoS parameters such as time delays and packet losses measured online. Simulation results show that this co-design approach significantly improves overall control performance and utilizes less bandwidth compared to static strategies.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.54-57
• /
• 2004

In this paper, an optimal design method to have a good performance is researched. The parameters which are senstive to the performance are examined and determined by using evolutionary computations and commercial CAD program to have a good performance. Design method simulated is compared with conventional procedure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.21-23
• /
• 2004

In this paper, an optimal design method to have good performance is researched. The parameters which are sensitive to the performance are examined and selected by using evolutionary computations and commercial CAD program to have good performance. Design method Simulated are compared with conrrentional procedure.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1997년도 춘계학술대회 학술발표 논문집
• /
• pp.271-274
• /
• 1997

This paper presents the optimization technique for design of a CMAC network by using an evolution strategies(ES). The proposed technique is designed to find the optimal parameters of a CMAC network, which can minimize the learning error between the desired output and the CMAC network's as well as the number of memory used in the CMAC network. Computer simulations demonstrate the effectiveness of the proposed design method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1031-1033
• /
• 2004

In this paper, an optimal design method to have a good performance is researched. The parameters which are senstive to the performance are examined and determined by using evolutionary computations and commercial CAD program to have good performance. Design method simulated is compared with conventional procedure.

• 한국생산제조학회지
• /
• 제18권3호
• /
• pp.261-269
• /
• 2009

Micro end-milling process is applied to fabricate precision mechanical parts cost-effectively. It is a complex and time-consuming job to select optimal process conditions with high productivity and quality. To improve the productivity and quality of precision mechanical parts, micro end-mill wear and cutting force characteristics should be studied carefully. In this paper, high speed machining experiments are studied to construct the optimum process design as well as the mathematical modeling of tool wear and cutting force related to cutting parameters in micro ball end-milling processes. Cutting force and wear characteristics under various cutting conditions are investigated through the condition monitoring system and the design of experiment. In order to construct the cutting database, mathematical models for the flank wear and cutting force gradient are derived from the response surface method. Optimal milling conditions are extracted from the developed experimental models.

• 한국지반공학회논문집
• /
• 제21권9호
• /
• pp.25-34
• /
• 2005

본 연구에서는 최적의 인공신경망 구조 설계를 위하여 인공신경망과 유전자 알고리즘이 결합된 신경망구조 설계기법이 제안되었다. 저자들은 신경망 구조설계시 인공지능 적용에 따른 계산적인 복잡함을 줄이며, 신경망에 의한 예측의 정확성을 증가시키기 위하여 인공신경망과 유전자 알고리즘의 특성을 조합하였다. 최적의 신경망 구조를 얻기 위하여 신경망 구조의 설계변수들에 대한 유전자 선별기법을 적용하였다. 제안된 합성 기법의 적용성을 평가하기 위하여 여러 지반공학 물성치들을 추정하는 해석에 적용되었다.