• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.216-222
• /
• 2008

The determination of spectrum charges for the operators is a main issue to efficiently manage the limited radio spectrum resources. In this paper, we propose a model to compute the optimal charges for radio spectrum usage. The objective is to determine that will maximize the spectrum charges, and decision variables of ratios for actual or estimated revenues are considered. The spectrum charges are maximized under satisfying the least profit for operators based on Log-Linear demand function. The parameters of actual sales and minimum profit of operators are analyzed to make an efficient management for radio spectrum. The results show that the spectrum charges increase as the actual sales increase, but it decrease as the required minimum profit of operator increases. It is also observed that the government should increase the ratio for estimated sales if anticipating the poor market in the future, otherwise they should increase the ratio for actual sales to maximize the spectrum charges.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.68-71
• /
• 2009

All-IP network requires change of the existing IP network engineering methods as the convergence service market between communication and broadcasting industries using IP network is growing rapidly. Especially the video services like IPTV require more strict transmission quality and higher bandwidth than the existing data services. So it is difficult to design All-IP network by the over-provisioning method which used to be used for the existing IP network design. It also requires a heavy investment which becomes one of big obstacles to the IPTV service expansion. In order to reduce the investment costs, it is required to design an optimized network by maximizing the utilization of the network resources and at the same time maintaining the customer satisfaction in terms of service quality. In this paper, we first analyze the effects of IPTV traffic on the existing internet. Then we compare two traffic engineering technologies, which are dimensioning without admission control and dimensioning with admission control, on the All-IP network design by simulation. Finally, we suggest cost effectiveness of traffic engineering technologies for designing the All-IP network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.3
• /
• pp.410-424
• /
• 1993

In this paper, we present new techniques for designing systolic arrya and asynchronous arrays for digital-signal processings. More specifically, we propose a systolic array with simple local interconnections which achieves optimal performance without having undesirable features such as preloading input data or global broadcasting. As asynchronous array for digital-signal processings, which can speed up the total computation time significantly is also which can speed up the total computation time significantly is also presented. The key component of the asynchronous array is a presented. The key component of the asynchronous array is a comunicaiton protocol which controls input data flow properly and efficiently. Finally, performance of the arrays is analyzed and a simulation using Occam programmed in a Transputer network is reported.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.141-150
• /
• 2014

A fully integrated CMOS security-enhanced passive (SEP) tag that compensates the security weakness of ISO/IEC 18000-6C is presented in this paper. For this purpose, we propose a security-enhanced protocol that provides mutual authentication between tag and reader. We show that the proposed protocol meets the security demands of the ongoing international standard for RFID secure systems, ISO/IEC 29167-6. This paper fabricates the SEP tag with a 0.18-${\mu}m$ CMOS technology and suggests the optimal operating frequency of the CMOS SEP tag to comply with ISO/IEC 18000-6C. Furthermore, we measure the SEP tag under a wireless environment. The measured results show that communications between the SEP tag and reader are successfully executed in both conventional passive and SEP modes, which follow ISO/IEC 18000-6C and the proposed security enhanced protocol, respectively. In particular, this paper shows that the SEP tag satisfies the timing link requirement specified in ISO/IEC 18000-6C.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2095-2110
• /
• 2015

This paper presents a design for a throughput-efficient online relay selection scheme for dual-hop multi-relay cooperative networks. Problems arise with these networks due to unpredictability of the relaying link quality and high time-consumption to probe the dual-hop link. In this paper, we firstly propose a novel probing and relaying protocol, which greatly reduces the overhead of the dual-hop link estimation by leveraging the wireless broadcasting nature of the network. We then formulate an opportunistic relay selection process for the online decision-making, which uses a tradeoff between obtaining more link information to establish better cooperative relaying and minimizing the time cost for dual-hop link estimation to achieve higher throughput. Dynamic programming is used to construct the throughput-optimal control policy for a typically heterogeneous Rayleigh fading environment, and determines which relay to probe and when to transmit the data. Additionally, we extend the main results to mixed Rayleigh/Rician link scenarios, i.e., where one side of the relaying link experiences Rayleigh fading while the other has Rician distribution. Numerical results validate the effectiveness and superiority of our proposed relaying scheme, e.g., it achieves at least 107% throughput gain compared with the state of the art solution.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.8-12
• /
• 2003

To protect digital communications and broadcasting that are expected to be increasingly used at frequencies above 1GHz, there is a need to determine permissible disturbance limits for frequency bands above 1GHz according to indicates that better correlates with interference level in digital systems. The quality of digital communications is expressed in terms of bit error rate(BER) or throughput. In this regard, it has been reported that degradation of BER or throughput can be estimated from the amplitude probability distribution (APD) of disturbance amplitude. Therefore, if the APD can simply be measured with a high accuracy, APD will be an optimal index for the assessment of interference in digital communications. In this paper, we show that a measurement method using statistic model of APD has compatibility about performance reduction estimation of WLAN. And through approach of this inspection, we propose numeral models about interference effects of peak value and time rate of spurious.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.275-285
• /
• 2015

To improve the efficiency of carrier sense multiple access (CSMA)-based medium access control (MAC) protocols, CSMA with collision resolution (CSMA/CR) has been proposed. In the CSMA/CR, a transmitting station can detect a collision by employing additional sensing after the start of a data transmission and then resolve the next collision that might occur by broadcasting a jam signal during a collision detection (CD) period. In this paper, we analyze the delay of a CSMA/CR based on a generic p- persistent CSMA model and obtain the minimum achievable delay of the CSMA/CR by finding the optimal length of the CD period according to the number of contending stations. Through this delay analysis, we also investigate the throughput-delay characteristics of the CSMA/CR protocol according to various parameters. Analysis and simulation results show that the CSMA/CR has a considerably lower delay and its throughput-delay characteristic is significantly improved than the conventional CSMA/CA and wireless CSMA/CD protocols.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.175-182
• /
• 2005

This paper presents encryption techniques for digital right management solutions of MPEG-4 streams. MPEG-4 is a format for multimedia streaming and stored in the MPEG-4 file format. We designed three kinds of encryption methods, which encrypt macro blocks (MBs) or motion vectors (MVs) of I-, P-VOPs (Video Object Planes), extracted from the MPEG-4 file format. We used DES to encrypt MPEG-4 data Based on theses three methods, we designed and implemented a DRM solution for an Internet broadcasting service, which enabled a MPEG-4 data streaming, and then compared the results of decryption speed and quality of rendered video sequences to get an optimal encryption method.

• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.155-161
• /
• 2019

We introduces a mobile robot that can navigate on a power transmission line arranged in bundled conductors. The designs of the proposed robot are performed for navigation on bundled conductors, and the navigation method for bundled conductors and obstacle avoidance are presented. The robot consists of 13 degrees of freedom (DOF) with a symmetrical structure for the left and right parts, including the four wheel joints. The navigation method is designed using a combination of three motion primitives such as linear motion of counterbalancing box, linear motion of robot arm, and rotational motion of wheel part. To examine the performance of the proposed robot, navigation simulations are conducted using $ADAMS^{TM}$. The robot navigations were simulated on obstacle environments that consisted of two- and four-conductor bundles. Based on the simulation results, the performance of the proposed robot was reviewed through the analysis of the trajectories of end-effectors. We confirmed that the proposed robot was capable of achieving optimal navigation on bundled conductors that included obstacles.

• Journal of Platform Technology
• /
• v.9 no.1
• /
• pp.3-14
• /
• 2021

Cognitive Radio network (CR) is a promising paradigm that helps the unlicensed user (Secondary User) to analyse the spectrum and coordinate the spectrum access to support the creation of common control channel (CCC). The cooperation of secondary users and broadcasting between them is done through transmitting messages in CCC. In case, if the control channels may get jammed and it may directly degrade the network's performance and under such scenario jammers will devastate the control channels. Hopping sequences may be one of the predominant approaches and it may be used to fight against this problem to confront jammer. The jamming attack can be alleviated using one of the game modelling approach and in this proposed scheme stochastic games has been analysed with more single users to provide the flexible control channels against intrusive attacks by mentioning the states of each player, strategies ,actions and players reward. The proposed work uses a modern player action and better strategic view on game theoretic modelling is stochastic game theory has been taken in to consideration and applied to prevent the jamming attack in CR network. The selection of decision is based on Q learning approach to mitigate the jamming nodes using the optimal MDP decision process