• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.4
• /
• pp.347-370
• /
• 2011

Slurry type shield would be very effective for the tunnelling in a sandy ground, when the slurry pressure would be properly adjusted. Low slurry pressure could cause a tunnel face failure or a ground settlement in front of the tunnel face. Thus, the stability of tunnel face could be maintained by applying an excess slurry pressure that is larger than the active earth pressure. However, the slurry pressure should increase properly because an excessively high slurry pressure could cause the slurry flow out or the passive failure of the frontal ground. It is possible to apply the high slurry pressure without passive failure if a horizontal impermeable layer is located in the ground in front of the tunnel face, but its location, size, and effects are not clearly known yet. In this research, two-dimensional model tests were carried out in order to find out the effect of a horizontal impermeable layer for the slurry shield tunnelling in a saturated sandy ground. In tests slurry pressure was increased until the slurry flowed out of the ground surface or the ground fails. Location and dimension of the impermeable layer were varied. As results, the maximum and the excess slurry pressure in sandy ground were linearly proportional to the cover depth. Larger slurry pressure could be applied to increase the stability of the tunnel face when the impermeable layer was located in the ground above the crown in front of the tunnel face. The most effective length of the impermeable grouting layer was 1.0 ~ 1.5D, and the location was 1.0D above the crown level. The safety factor could be suggested as the ratio of the maximum slurry pressure to the active earth pressure at the tunnel face. It could also be suggested that the slurry pressure in the magnitude of 3.5 ~4.0 times larger than the active earth pressure at the initial tunnel face could be applied if the impermeable layer was constructed at the optimal location.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.366-385
• /
• 1995

Epidemiological studies are important in both the prevention and treatment of mycobacterial infections. This study was initiated to establish the pulsed-field gel electrophoresis (PFGE) method, which are not yet extensively studied. The most apprpriate restriction endonucleases included DraI, AsnI, and XbaI. The optimal PFGE condition was different according to the enzymes used. Two stage PFGE was performed, in case of DraI first stage was performed with 10 seconds of initial pulse and 15 seconds of final pulse, while the second stage was performed with 60 seconds of initial pulse and 70 seconds of final pulse. The electrophoresis time for DraI-PFGE was 14 hours for each stage. Electrophoresis was performed for 22 hours, in case of XbaI, with 3 seconds of initial pulse and 12 seconds of final pulse. Electrophoresis was performed for 22 hours, in case of AsnI, with 5 seconds of initial pulse and 25 seconds of final pulse. In all cases the voltage of the electrophoresis was maintained constantly at 200 voltage. Standard mycobacterial strains, which included Mycobacterium bovis BCG, M. tuberculosis, and M. fortuitum, could not be differentiated by PFGE analysis. PFGE analysis was performed to differentiate 9 clinically isolated M. fortuitum strains using AsnI. All M. fortuitum strains showed different genotypes except 2 strains. Cluster analysis divided M. fortuitum strains into 2 large groups. PFGE analysis was performed to further differentiate M. fortuitum isolates using XbaI. The undifferentiated 2 M. fortuitum strains showed different PFGE patterns with Xba I. Cluster analysis of the XbaI-PFGE patterns showed more complex grouping than AsnI-PFGE patterns, which showed that XbaI-PFGE analysis was better than AsnI-PFGE in M. fortuitum genotyping. The top dissimilarity values of AsnI-PFGE and XbaI-PFGE were 0.74 and 0.75, respectively. This value was higher than that of arbitrarily primed polymerase chain reaction (AP-PCR) analysis and lower than that of restriction fragment length polymorphism (RFLP) analysis. This suggested that PFGE can be used as a supportive or alternative genotyping method to RFLP analysis.

• Journal of Korean Society of Transportation
• /
• v.23 no.2
• /
• pp.117-130
• /
• 2005

In both deteministic user Optimal Traffic Assignment Model (UOTAM) and stochastic UOTAM, travel time, which is a major ccriterion for traffic loading over transportation network, is defined by the sum of link travel time and turn delay at intersections. In this assignment method, drivers actual route perception processes and choice behaviors, which can become main explanatory factors, are not sufficiently considered: therefore may result in biased traffic loading. Even though there have been some efforts in Stochastic UOTAM for reflecting drivers' route perception cost by assuming cumulative distribution function of link travel time, it has not been fundamental fruitions, but some trials based on the unreasonable assumptions of Probit model of truncated travel time distribution function and Logit model of independency of inter-link congestion. The critical reason why deterministic UOTAM have not been able to reflect route perception cost is that the route perception cost has each different value according to each origin, destination, and path connection the origin and destination. Therefore in order to find the optimum route between OD pair, route enumeration problem that all routes connecting an OD pair must be compared is encountered, and it is the critical reason causing computational failure because uncountable number of path may be enumerated as the scale of transportation network become bigger. The purpose of this study is to propose a method to enable UOTAM to reflect route perception cost without route enumeration between an O-D pair. For this purpose, this study defines a link as a least definition of path. Thus since each link can be treated as a path, in two links searching process of the link label based optimum path algorithm, the route enumeration between OD pair can be reduced the scale of finding optimum path to all links. The computational burden of this method is no more than link label based optimum path algorithm. Each different perception cost is embedded as a quantitative value generated by comparing the sub-path from the origin to the searching link and the searched link.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.25-31
• /
• 2012

This study aimed to investigate the effect of night temperature on the productivity, growth, and fruit characteristics of tomatoes and set the optimal night air temperature. Tomatoes (Solanum lycopersicum Mill. cv. Superdoterang and cv. Rapito) were grown at 5, 10, 15, and $20^{\circ}C$ during night time and ventilation temperature point during day time set $27^{\circ}C$. Depending on night air temperature, plant height, leaf area, fresh and dry weight of each organ, leaf, stem, and root were changed. Condition of high night temperature resulted in promotion of tomatoes growth with high dry weight and fresh weight. However, the dry weight under night temperature $20^{\circ}C$ decreased, especially, in 'Superdoterang'. On changes of yield, 'Rapito' showed higher productivity than 'Superdoterang' and the highest productivity point for nigh temperature is $13.32^{\circ}C$ for 'Superdoterang' and $14.25^{\circ}C$ for 'Rapito'. Although the total yield decreased from the point, the daily productivity increased with increasing night temperature, the highest point for nigh temperature is $14.45^{\circ}C$ for 'Superdoterang' and $16.46^{\circ}C$ for 'Rapito'. High temperature deceased the fruit weight and increased total soluble solid content in fruits. It is concluded that the night air temperature changes productivity of tomato and the temperatures between productivity and growth velocity have differences depending on different cultivars. scores than the other beef jerky samples (p<0.05).

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.117-126
• /
• 2012

This study carried out on the manufacturing of pidan. The production of pidan can be one of solutions for over-produced eggs and stable egg price. For the alkali-pickling solution for manufacturing of Pidan, the tested concentration of NaOH and NaCl were respectively as 3, 5, 7% and 5, 10, 15, 20%, and examined every 2 days for 14days. According to the results, pH value of alkali-pickling solution was increased by the increment of NaOH concentration and the pickling period, and was decreased by the increment of NaCl concentration. The pH value of egg yolk was increased by the increment of NaOH concentration, but it was not significantly different by the NaCl concentration. By the increment of NaOH and NaCl concentrations, the alkali infiltration in egg yolk and egg white was accelerated. Furthermore, the weight change of the eggs in the alkali-solution has no effects on manufacturing of Pidan. Liquefied albumen showed significant differences by NaOH concentration rather than that of NaCl. There was no liquefied albumen for 14days at 3% of NaOH, but it was found between 11-12days at 5% and 8-10days at 7%, respectively. The pH values of egg white when it was liquefied albumen were between 11.8 and 12.0. Pidan was made by heat treatment after 6-7days dipped in the solution at the concentration of 7%, about 10days at 5%, and 12-14days at 3% of NaOH, respectively. Although, the period of manufacturing of Pidan was saved by the increment of NaOH concentration, liquefied albumen was accelerated and the food preference was decreased by ammonia odor. Therefore, the suitable concentration of NaOH is between 3 and 5%, and that of NaCl is between 5 and 10% due to the effect of salinity by the soaking period. Through this study, optimal pickling solution and dipping time for manufacturing of Pidan was figured out, and also find out that it can save a time about 15days for manufacturing of Pidan.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.41-52
• /
• 2010

This study was conducted to estimate genetic parameters for growth traits using multivariate animal models in Yorkshire breed. For the study, 16,202 records for growth traits collected between the year 1999 and 2005 from Yorkshire pigs in K GGP were used. The effects of environmental factors such as sex, birth year, birth season, parity and birth weight group affected growth traits significantly (p<0.01). Birth weight tended to be positively correlated with average daily gain (ADG) and lean percent. But it seemed to affect age at 90 kg, average adjusted backfat thickness (BF), and eye muscle ares (EMA) negatively. For average pig suckling weight (ASW) and total weight at suckling (TWS), the higher birth weight is the better performance. But, in case of total number of born and number of suckling, the result was shown vice versa. Approximately 10~30% lower heritability estimates were obtained for growth traits by using the model that includes descriptions of common litter effects (CL) than by using the model that ignores those (NCL) for more accurate estimation of heritability. The estimates of heritabilities were 0.468, and 0.328 for ADG, 0.474 and 0.326 for age at 90 kg, 0.452, and 0.396 for BF, 0.240 and 0.200 for EMA and, 0.458, and 0.380 for lean percent in NCL and CL, respectively. Therefore, in order to estimate optimal genetic parameters, it could be inferred that the statistical model which considers litter effects must be applied.

• Journal of Korea Port Economic Association
• /
• v.34 no.3
• /
• pp.17-52
• /
• 2018

The purpose of this paper is to measure the clustering change and analyze empirical results. Additionally, by using k-means, hierarchical, and mixed models on Asian container ports over the period 2006-2015, the study aims to form a cluster comprising Busan, Incheon, and Gwangyang ports. The models consider the number of cranes, depth, birth length, and total area as inputs and container twenty-foot equivalent units(TEU) as output. Following are the main empirical results. First, ranking order according to the increasing ratio during the 10 years analysis shows that the value for average linkage(AL), mixed ward, rule of thumb(RT)& elbow, ward, and mixed AL are 42.04% up, 35.01% up, 30.47%up, and 23.65% up, respectively. Second, according to the RT and elbow models, the three Korean ports can be clustered with Asian ports in the following manner: Busan Port(Hong Kong, Guangzhou, Qingdao, and Singapore), Incheon Port(Tokyo, Nagoya, Osaka, Manila, and Bangkok), and Gwangyang Port(Gungzhou, Ningbo, Qingdao, and Kasiung). Third, optimal clustering numbers are as follows: AL(6), Mixed Ward(5), RT&elbow(4), Ward(5), and Mixed AL(6). Fourth, empirical clustering results match with those of questionnaire-Busan Port(80%), Incheon Port(17%), and Gwangyang Port(50%). The policy implication is that related parties of Korean seaports should introduce port improvement plans like the benchmarking of clustered seaports.

• Journal of Korea Water Resources Association
• /
• v.52 no.spc2
• /
• pp.811-822
• /
• 2019

Environmental flows in the downstream sections of Yongdam Dam, Wonju Stream Dam, and Hongcheon River were estimated with selected target fish species such as Nigra for the site of Yongdam Dam, Splendidus for the site of Wonju Stream Dam, and Signifer for the site of Hongcheon River by considering endangered and domestic species. Physical habitat analysis was performed to estimate environmental flows for the study sites by applying the Physical Habitat Simulation (PHABSIM) and RIVER2D which combined hydraulic and habitat models. Based on the monitored data for ecological environment, the Habitat Suitability Index (HSI) for the target species was estimated by applying the Instream Flow and Aquatic Systems Group (IFASG). In particular, based on the result of fish monitoring, the HSI for each stage of the growth for target species was analyzed. As a result, the Weighted Usable Area (WUA) was maximized at $4.9m^3/s$ of flow discharge during spawning, $5.8m^3/s$ during the period of juvenile, and $8.9m^3/s$ during the adult fish season at the downstream section of Yongdam Dam. The result of the Wonju Stream Dam showed an optimal environmental flow of $0.4m^3/s$, $1.0m^3/s$, and $1.5m^3/s$ during the period of spawning, juvenile, and adult. The habitat analysis for the site of Hongcheon River, which is a non-regulated stream, produced an optimum environmental flow of $5m^3/s$ in the spawning period, $4m^3/s$ in the juvenile stage and $6m^3/s$ in the adult stage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.3
• /
• pp.176-184
• /
• 2019

The rice variety Chucheongbyeo is mostly cultivated for organic farming in the central region of Korea. This variety is more delicate than the recently developed varieties in rice yield, quality, and pest resistance, and is therefore, not suitable for organic farming. This study was conducted to select suitable varieties for organic rice farming in the central plain area of Korea. We tested 15 different varieties in the organic paddy field of Cheongju city from 2011 to 2013. As the experimental field had good fertility because it had been organically managed for many years, culm length and number of panicles developed better than the varietal characteristics. Daebo, Chinnong and Hyeonpum had slightly lower ripened grain ratio than Chucheongbyeo. The milled rice yield of Samkwang, Sukwang, Haiami, Cheonghaejinmi and Daebo increased by 9-18% compared to that of Chucheongbyeo. The protein content was under 7% for Cheongnam, Sukwang, Daebo, Samkwang, Hyeonpum, Chinnong, Chilbo, Hopyung, Hwangkeumnuri, Suryeojinmi and Jinsumi and under 6% for Sukwang and Samkwang. The whiteness was over 40 in Sukwang, Daebo, Samkwang and Jinsumi. The palatability grade and head rice ratio were good in Daebo, Sukwang, Samkwang and Jinsumi. Therefore, this study recommended Samkwang, Daebo, and Jinsumi as the optimal varieties for organic rice farming in the central plain area of Korea. These varieties could replace Chucheongbyeo, which is inferior to the recently developed varieties in terms of disease and pest resistance and yielding performance.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.447-453
• /
• 2019

In this study, the effect of supplying volume and frequency of a nutrient solution consisted with $NO_3-N$ 4.6, $NH_4-N$ 3.4, $PO_4-P$ 3, K 3, Ca 4.6 and Mg $2.2mmol{\cdot}L^{-1}$ on growth and fruit quality of 'Duke' blueberry was investigated. Three years old 'Duke' blueberry bushes cultivated in containers ($60{\times}80{\times}40cm$) filled with 130L peat moss and 40L pearlite (v/v) were selected for the experiment. The growth containers were mulched with sawdust. Two different volumes (4L and 8L) of nutrient solution was tested at three different supplying frequencies (one time, two times, and three times) per week and the drainage quality of nutrient solution and fruit quality of 'Duke' blueberry was evaluated. The optimal drainage rate for the vegetable cultivation is known to be 20-30%. The results revealed that the average drainage rates of 27% and 29% for the nutrient solution supplied in 'Duke' blueberry growth medium at 4L, 2 times/7 days and 4L, 3 times/7days, respectively. The highest shoot diameter (4.2mm) and shoot length (31cm) of 'Duke' blueberry was recorded with the 8L of nutrient solution supplied at 3 times per 7 days. According to the analysis of inorganic components in the drainage of nutrient solution, there was a tendency of absorbing nitrogen at the early stage of growth. The supplying volume and frequency of nutrient solution was not significantly affected on 'Duke' blueberry fruit weight, soluble solids content, and titratable acidity. The highest yield per bush (2.7kg) was recorded for the nutrient solution supplied with 4L at three times per 7 days, while the 4L nutrient solution supplied at one time per 7 days resulted the lowest yield of 1.4kg per bush. Consequently, the tested nutrient solution can be applied for the 'Duke' blueberry bushes with the volume of 4L at three times per week for the better crop growth.