• Current Optics and Photonics
• /
• 제4권6호
• /
• pp.551-557
• /
• 2020

A mirror-in-slab waveguide is fabricated on a slab waveguide by using the refractive-index contrast between two materials, with the reflection performance depending on the slab waveguide's design. In this research, a slab waveguide design consisting of silicon (Si) as the core and SiO2 as the substrate was designed and developed to determine the coupling, waveguide, and mirror losses. Based on experimental results, coupling loss is dominant and is affected by the design of the slab waveguide. Furthermore, the mirror loss is affected by the design of the mirror, such as the curvature radius and the size of the mirror. TE and TM polarizations of light are used in the measurements. The experimental results show that mirror losses due to reflection by mirrors are 0.011 dB/mirror and 0.007 dB/mirror for TE and TM polarizations respectively. A simulation was performed to confirm whether the size of mirror is sufficient to reflect the input light, and to check the quality of the surfaces of fabricated mirrors.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.711-720
• /
• 2021

A novel optical hybrid device that doubles the multilevel demodulation resolution by adding the optical interferometer with a waveguide crossover is proposed, theoretically analyzed and experimentally verified. We report two types of all-passive phase control schemes that will be referred to as a phase compensation scheme and a phase optimization scheme. We also apply the proposed phase control schemes to a 45° optical hybrid consisting of two parallel 90° optical hybrids together with the proposed phase control scheme for demodulating 8-level differential phase shift keying optical signals. Octagonal phase response with low wavelength sensitive excess loss of <0.8 dB over 31-nm-wide spectral range will be demonstrated in the InP-based material platform.

• 한국광학회지
• /
• 제10권5호
• /
• pp.419-423
• /
• 1999

측면 연마된 단일모드 광섬유와 다중모드 폴리머 평면도파로 사이의 소산장 결합을 이용한 광필터를 제작하고 그 특성을 측정하였다. 소자의 편광의존성을 줄일 수 있는 방법 제안하였으며 실험으로 검증하였다. 그리고 광필터의 공진파장과 여과 깊이는 평면도파로의 두께와 연마깊이로서 적절히 선택할 수 있음을 실험으로 보였다. 광섬유 연마과정, 폴리머 평면도파로 제작 등을 포함한 소자제작 공정을 소개하였다. 제작된 광필터의 3㏈대역폭은 15nm, 삽입손실은 0.2㏈, 편광에 따른 공진 파장의 차이는 2nm 이하였다. 그리고 주위온도에 의한 공진파장의 이동거리는 -0.35nm/$^{\circ}C$로 측정되었다.

• 한국광학회지
• /
• 제8권6호
• /
• pp.492-499
• /
• 1997

굽은 비선형 도파로를 이용한 완전 광 스위치와 굽은 비선형 Y 분기각을 갖는 도파로를 이용한 완전 광 논리 연산소자를 제안하였다. 제안된 완전 광 스위치와 완전 광 논리 연산소자는 굽은 비선형 도파로를 따라가는 비선형파의 전파에 기초를 두고 있다. 빔의 전파특성은 도파로의 비선형성과 입력 파워, 도파로의 굽은 각도 등의 파라미터에 의해 좌우되므로 파라미터를 변화시켜 가면서 파워의 출력 특성을 계산해 보았다. 또한, 비선형 물질로 빠져 나오는 파워를 다양한 위치의 검출기에서 계산함으로써 특정한 검출기의 위치에서 가장 이상적인 디지털 스위칭 특성을 찾았고 도파로 끝과 비선형 물질로 빠져 나오는 파워의 비율에 의해 다양한 논리 함수(AND, OR, XOR)를 구현해 보았다.

• 전기학회논문지
• /
• 제61권3호
• /
• pp.433-436
• /
• 2012

We propose a novel micro surface plasmon resonance (SPR) sensor system based on polymer materials. The proposed SPR system consists of the incident medium with polymer waveguide and the gold thin film for sensing area. Using a polymer optical waveguide instead of a prism in SPR sensing system offers miniaturization, low cost, and potable sensing capability. The whole device performance was analyzed using the finite-difference time domain method. The optimum gold thickness in the attenuated total reflection mirror of polymer waveguide is around 50 nm and the resonance angle to generate surface plasmon wave is 68 degrees.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.309-319
• /
• 2001

This paper demonstrates the development of optical temperature sensor based on the etched silica-based planar waveguide Bragg grating. Topics include design and fabrication of the etched planar waveguide Bragg grating optical temperature sensor. The typical bandwidth and reflectivity of the surface etched grating has been ∼0.2nm and ∼9%, respectively, at a wavelength of ∼1552nm. The temperature-induced wavelength change is found to be slightly non-linear over ∼200$^{\circ}C$ temperature range. Typically, the temperature-induced fractional Bragg wavelength shift measured in this experiment is 0.0132nm/$^{\circ}C$ with linear curve fit. Theoretical models with nonlinear temperature effect for the grating response based on waveguide and plate deformation theories agree with experiments to within acceptable tolerance.

• 한국정밀공학회지
• /
• 제20권12호
• /
• pp.42-47
• /
• 2003

The laser direct writing method has some advantages of being maskless, allowing rapid and inexpensive prototyping in comparison to conventional mask-based photolithography. In general, there are two kinds of laser direct writing methods such as the laser ablation method and the laser polymerization method. The laser polymerization method was studied fur manufacturing waveguide in this paper. It is important to reduce line width for image mode waveguides, so some investigations will be carried out in various conditions of process parameters such as laser power, writing speed, focusing height and optical properties of polymer. Experimentally, the optical waveguide was manufactured trapezoid shape. Through SEM the waveguide was 20 ${\mu}{\textrm}{m}$ width and 7.4 ${\mu}{\textrm}{m}$ height.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.56-62
• /
• 1998

One of the key components to accomplish WDM all-optical network is an arrayed waveguide grating router. The spectral characterisitc of the ypeical arrayed waveguide grating rouger has parabolic shape, hence the bandwidth is limited. The spectral response of an optical filter should be as flat as possible for the reliable operation of the syste, because the center frequency of the optical source could be deviated in the actual system. In order to acquire these characteristics, we propose and design a new type of the arrayed waveguide grating router with a flat passband using the Fourier optics concept. The BPM simulation results of the new arrayed waveguide grating router with the flat passband show that the bandwideth is 0.8 nm at -1 dB, instertion loss about 6 dB, and the crosstalk less than -23 dB fro each cnannel, which is 1.6 nm(200 GHz) separated from the adjacent channel around 1550 nm wavelength range.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.114-117
• /
• 1996

The wavelength selectivity in grating-assisted optical waveguide couplers is studied using a matrix method to analyse optical filter characteristics. The matrix method is extended to both 2-system modes and all guided system modes. The influence of fundamental design parameters on the performances of the optical filters by waveguide couplers is discussed.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.53-65
• /
• 1998

Planar lightwave circuits (PLCs) provide various important devices for optical wavelength division multiplexing (WDM) systems, subscriber networks and etc. This paper reviews the recent progress and future prospects of PLC technologies including arrayed-waveguide grating multiplexers, optical add/drop multiplexers, programmable dispersion equalizers and hybrid optoelectronics integration technologies.