• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.185-192
• /
• 1989

It is shown that GaAs/GaAs stripe Roof-Top-Reflector LD is better than cleaved mirror LD by numerical analysis. And surface light emitting device is developed by LPE melt-back growth, which is of good controllability for OEIC. OEIC transmitter using RTR LD structured device and FET has been made and modulated, expected to show good modulation characteristics after solving process problem. Beam-Lead LD mounted on Si carrier has been made and shows low heat-resistance and so long life and good characteristics of LD.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.147-151
• /
• 2004

In this study, an optical fiber assembly directly coupled with a laser diode or a photo diode is designed to confirm high reliable optical coupling efficiency of optical transmitter(Tx) and receiver(Rx). The optical fiber assembly is fabricated by soldering an optical fiber and a Kovar ferrule using a glass solder after inserting an optical fiber through a Kovar ferrule. The Kovar which has good welding characteristics is applied to introduce laser welding technique. The glass solder has excellent thermal characteristics such as thermal shift delamination compared with PbSn, AuSn solder previously used usually. Furthermore, the glass solder doesn't need fiber metalization and this enables low cost fabrication. However, the glass soldering is high temperature process over 35$0^{\circ}C$ and the convex shape after solidification due to surface tension causes the stress concentration on optical fiber. The stress concentration on the optical fiber increases the optical insertion loss and possibility of crack formation. The shape of glass solder was designed referring to 2-D Axi-symmetric FEM simulation. To test the mechanical reliability, mechanical vibration test and shock test were done according to Telcorida GR-468-Core protocol. After each test, the optical loss of the stress distributed fiber assembly didn't exceed 0.5 dB, which passes the test.

• Korean Journal of Optics and Photonics
• /
• v.35 no.4
• /
• pp.150-156
• /
• 2024

One of the key factors in research regarding long-distance laser beam propagation, as in free-space optical communication or laser power transmission, is the transmission efficiency of the laser beam. As a way to improve efficiency, we perform extensive numerical simulations of the effect of modifying the laser beam's profile, especially replacing the fundamental Gaussian beam with a super-Gaussian beam. Numerical simulations of the transmitted power in the ideal diffraction-limited beam diameter determined by the optical system of the transmitter, after about 1-km propagation, reveal that the second-order super-Gaussian beam can yield superior performance to that of the fundamental Gaussian beam, in both single-channel and coherently combined multi-channel laser transmitters. The improvement of the transmission efficiency for a 1-km propagation distance when using a second-order super-Gaussian beam, in comparison with a fundamental Gaussian beam, is estimated at over 1.2% in the singlechannel laser transmitter, and over 4.2% and over 4.6% in coherently combined 3- and 7-channel laser transmitters, respectively. For a range of the propagation distance varying from 750 to 1,250 m, the improvement in transmission efficiency by use of the second-order super-Gaussian beam is estimated at over 1.2% in the single-channel laser transmitter, and over 4.1% and over 4.0% in the coherently combined 3- and 7-channel laser transmitters, respectively. These simulation results will pave the way for future advances in the generation of higher-order super-Gaussian beams and the development of long-distance optical energy-transfer technology.

• ETRI Journal
• /
• v.30 no.2
• /
• pp.249-254
• /
• 2008

In this paper, we demonstrate an electrically band-limited carrier-suppressed return-to-zero (EB-CSRZ) signal generator operating up to a 10 Gbps data rate comprising a single-stage Mach-Zehnder modulator and a wideband signal mixer. The wideband signal mixer comprises inverter stages, a mixing stage, and a gain amplifier. It is implemented by using a 0.13 ${\mu}m$ CMOS technology. Its transmission response shows a frequency range from DC to 6.4 GHz, and the isolation response between data and clock signals is about 21 dB at 6.4 GHz. Experimental results show optical spectral narrowing due to incorporating an electrical band-limiting filter and some waveform distortion due to bandwidth limitation by the filter. At 10 Gbps transmission, the chromatic dispersion tolerance of the EB-CSRZ signal is better than that of NRZ-modulated signal in single-mode fiber.

• International Journal of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.43-48
• /
• 2019

We design a reconfigurable optical node for metropolitan WDM networks, and numerically study the capability of the node in the optical signal level. Unlike a long-haul WDM system, major limitations of metropolitan WDM systems are power loss, fiber dispersion and optical signal-to-noise ratio(OSNR) degradation due to EDFAs. Therefore, we include the behaviors of transmitter and receiver, and fiber, EDFAs, and optical filters(MUX/DeMux) in numerical simulations with varying parameters over wide range. From simulation results, we can identify the maximum span numbers for OC-48 and OC-192 to achieve $BER<10^{-12}$ using the node structure at various received powers and residual dispersions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.853-858
• /
• 2022

In this paper, we show a simultaneous transmission of underwater optical wireless power transfer and underwater optical wireless communication. A laser diode is used for electric-to-optic conversion at the transmitter and a solar cell is used for optic-to-electric conversion at the receiver. We optimized the transmitter and receiver for the best performance. The laser diode is a 100-mW laser diode and showed a conversion efficiency of 18.5%. The experimental results showed a 0.33-% DC-to-DC underwater power transfer efficiency at 5 m and a data rate of 100 kbps at 1 m.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.36-42
• /
• 2007

In this paper, we have studied temperature compensation architecture for a bust mode optical transmitter to convert the electric burst mode date signal to a optical one through the laser diode. In order to get stable high speed data transmission, we used digital sampling technique with a microprocessor for the temperature compensation of the laser diode, not the previous real time analog technique. Though the digital automatic power control circuit should be complemented the previous analog one with accuracy and effectiveness. So the digital technique will be more effective in further future in development for the over Gb/s transmitting speed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.1
• /
• pp.76-79
• /
• 2015

Visible light communication (VLC) is a short range optical communication technology using light emitting diodes. In this paper, we implement variable pulse position modulation (VPPM) defined in the IEEE 802.15.7 standard with a Cortex-M processor, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The synchronization procedure between the transmitter and receiver is not defined clearly in the VPPM standard. In order to synchronize the transmitter and receiver easily, two overhead bits are used including one start bit and one stop bit modulated by on-off keying (OOK). Experimental results under various environmental conditions show that the proposed VPPM can support a seamless 100 Kbps data rate with 10 levels in the dimming control.

• Korean Journal of Optics and Photonics
• /
• v.12 no.6
• /
• pp.503-506
• /
• 2001

When DC voltages from 5 V up to 90 V are applied to a transmitter chip excited by an ultrafast lacer beam, the terahertz electromagnetic pulses and their spectra are changed. The spectrum shifts to the high frequency range when the high DC voltage is applied to the chip. At that time, the signal-to-noise ratio is increased from 250: 1 to 10,000: 1. The spectrum can expand up to 4 THz by optimal realignment of the THz system. Also, two terahertz electromagnetic pulses are generated from a receiver chip when the laser detection beam is reflected to the back side of the chip.

• Journal of Sensor Science and Technology
• /
• v.21 no.6
• /
• pp.429-433
• /
• 2012

In this paper, we reduced the optical noise interference in a visible light communication system using two color LEDs. In the transmitter, the original and the inverted signals of the transmitted data modulated a red LED and a blue LED, respectively. In the receiver, a differential detector which is composed of two photodetectors and an optical red filter detected the mixed signal radiated from the two LEDs. In an environment that the optical noise from a fluorescent lamp exists, the signal-to-noise ratio in this system was improved by about 20dB compared to that in the conventional system which uses a single LED and a single photodetector.