• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.777-781
• /
• 2002

Recently, an optical disc system has been proposed using blue laser diode, high NA objective lens and groove only disc structure. A new method is needed to readout CD and DVD in this blue system. In order to readout CD and DVD in HD-DVD system, we adopted dual-lenses actuator in consideration of optical utilization efficiency, optical performance and insurance of sufficient W.D (working distance). This dual-lenses actuator has two objectives in radial direction, one is for CD/DVD and the other is for HD-DVD. We had to solve the induced problems of DC tilt increase, $2^{nd}$ resonance deterioration and AC sensitivity drop caused by disposing two lenses in an actuator. Especially, to solve AC sensitivity drop, we introduced two 2-pole magnets and separated focus and track magnetic circuits. Consequently we presented that dual-lenses actuator has been possessed good performance. And we measured eye patterns of CD, DVD and HD-DVD by using HD-DVD optical pick-up with dual-lenses actuator.

• 정보저장시스템학회논문집
• /
• 제1권1호
• /
• pp.78-83
• /
• 2005

The Blu-ray disc as a next generation high density optical medium uses an objective lens of high numerical aperture(NA 0.85) and blue laser in order to increase the recording density. The double layer is also useful for doubling the density. The spherical aberration of Blu-ray disc is very sensitive to the thickness of the disk because of high numerical aperture. This paper suggests a method to compensate the spherical aberration caused by the change of disk thickness, by using the Liquid Crystal lens instead of the Liquid Crystal panel. It was possible to develop both the LC panel generating the optical phase difference and LC lens changing the optical power. In this paper, we analyzed the aberration performance and a position sensitivity of the two type LC elements when the samples deviate from the optical axis of the objective lens. The results of applying this analysis show that the LC lenses rather than the LC panels have a significant assembling tolerance. The theoretical characteristics of the two elements are calculated and compared with the measurement data.

• 한국인터넷방송통신학회논문지
• /
• 제23권2호
• /
• pp.163-168
• /
• 2023

본 논문에서는 화학적 감지 및 바이오 감지를 위한 새로운 플랫폼을 제시하였다. 작동 원리는 광 방향성 결합기(DC)와 다중 모드 간섭 결합기 (MMI)의 결합효율과 간섭특성에 기반한다. 또한, 실리콘 기판에 통합할 수 있도록 평면 기술을 사용하여 실현하였다. 먼저, DC와 MMIC의 분산곡선을 설명하고, 도파관 감도를 증가시키기 위한 최적화된 슬롯 광 도파관의 설계 사양을 선택하였다. 다음으로, 감지 분석물의 굴절률 변화에 대한 센서 응답을 수치해석 하였다. 수치해석 결과, 분석 물질의 굴절률 단위 (RIU) 변화당 높은 유효 지수 변화가 얻어졌으며, 그 감도는 DC 및 MMIC 설계 기법을 사용하여 조정할 수 있음을 보여주었다.

• 천문학회보
• /
• 제45권1호
• /
• pp.68.2-68.2
• /
• 2020

UVO-Multiband Polarizing Imager System (UVOMPIS) is an ultraviolet to visible light multi-wavelength polarization/imaging system for Compact Advanced Satellite. We developed Linear Astigmatism Free-Three Mirror System (LAF-TMS) D200F2 as an optical system of UVOMPIS which has an entrance pupil diameter of 200 mm, a focal ratio of 2, a field of view of 2° × 4°. LAF-TMS is a confocal off-axis reflecting telescope system that removes linear astigmatism, and its all mirrors (M1, M2, M3) are optimized with the freeform surface to reduce high-order aberrations. Through the sensitivity analysis and Monte-Carlo simulation as the tolerance analysis, we can confirm the feasibility of the system, relatively sensitive parameters (tilt, decenter, despace, surface RMS error), and considerations for optomechanical design. From the sensitivity analysis, we can discover the relatively sensitive optical alignment parameters to a single perturbation. Further more, in the monte-carlo simulation, we investigate the minimum tolerance budget satisfying the required optical performance and whether the tolerance range is satisfied within manufacturing error.

• 센서학회지
• /
• 제17권2호
• /
• pp.95-99
• /
• 2008

Various etching methods of optical fiber and formation of metal nano particles on the optical fiber have been proposed for fabrication of fiber optic localized surface plasmon resonance (FO LSPR) biosensors. Different types of etched optical fiber are possible by removing the cladding of optical fiber using HF (hydrofluoric acid) solution and BHF (buffered hydrofluoric acid) solution, which results in improved surface roughness when BHF solution is used. Localized surface plasmon can be formed and measured by formation of silver and gold nano particles on the etched optical fiber. The characteristics of the etched optical fiber and metal nano particles on the etched surface of the optical fiber play a key role in dictating the sensitivity of the LSPR sensors, so that the proposed results can be expected to be applied for related research on fiber optic based biosensors.

• 전기학회논문지
• /
• 제58권8호
• /
• pp.1580-1584
• /
• 2009

We have theoretically analyzed the monolithic integration of vertical cavity lasers with depleted optical thyristor (VCL-DOT) structure and experimentally demonstrated optical logic gates such as AND-gate, OR-gate, and INVERTER implemented by VCL-DOT for an optical programmable gate array. The optical AND and OR gates have been realized by changing a input bias of the single VCL-DOTs and all kinds of optical logic functions are also implemented by adjusting an intensity of the reference input beams into the differential VCL-DOTs. To achieve the high sensitivity, high slope efficiency and low threshold current, a small active region of lasing part and a wide detecting area are simultaneously designed by using a selective oxidation process. The fabricated devices clearly show nonlinear s-shaped current-voltage characteristics and lasing characteristics of a low threshold current with 0.65 mA and output spectrum at 854 nm.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.63-68
• /
• 2022

Two wavelength reconfigurable optical nodes are designed. One for 20km or shorter link length, and the other for up to 60km link length. While the first one requires no dispersion compensation, the latter needs dispersion compensation fiber included in the node, which requires additional optical amplifier to compensate the insertion loss of DCF. We calculate all the optical path losses in both cases using the typical value of optical components in the market to see the feasibility of the designed optical node. The minimum received power in the node is calculated to be -21.5dBm without DCF and -12.5dBm with DCF, respectively. These received powers are above the receiver sensitivity both for OC-48 and OC-192 according to the previous work.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.677-682
• /
• 2015

본 논문에서는 일반적인 광시스템에서 항상 존재하는 잡음 및 외부로부터 더해지는 잡음이 광시스템의 수신기의 성능에 미치는 영향에 대하여 고찰하였다. 광전송시스템에서 광검출기가 1 이하의 양자효율을 갖는 경우를 고려하여 온-오프 키잉 전송시에 수신기의 수신 감도를 계산하였다. m이 50이상인 경우 표준에러확률을 유지하기 위한 광시스템의 수신기 감도가 300이하로 계산되어 m가 적은 경우에 비해서 저출력 시스템을 구성할 수 있음을 확인할 수 있었다. 그러나 이러한 값도 실제 시스템에서는 큰 부담이 되는 값이므로 보다 저출력 광원을 사용하는 경우를 고려하여 수신단에 전치증폭기를 설치한 경우에 대해서도 고려하였는데, 그림 3에서 보이는 바와 같이 보다 적은 출력을 갖는 광원을 사용해도 무방하다는 결과를 얻을 수 있었다.

• 한국광학회지
• /
• 제32권1호
• /
• pp.9-14
• /
• 2021

본 논문에서는 인공위성용 비축 삼반사 망원경의 조리개 위치에 따른 광학계 연구를 진행하였다. 인공위성 광학 탑재체로 주로 사용되는 비축 삼반사 망원경은 높은 해상도와 넓은 화각을 가져야 한다. 또한, 광학계가 구조적으로 비축상에 위치하여 조립이 어려우므로 넓은 공차범위를 가져야 한다. 그러나 조리개의 위치 선정에 따라 광학계의 성능 차이 이외에도 민감도의 차이가 있어, 사용 목적에 따른 적합한 조리개의 위치 선정이 중요하다. 따라서 본 논문에서는 조리개 위치가 각각 다른 비축 삼반사 망원경을 설계하고 성능 및 민감도 분석을 진행하여 적합한 조리개의 위치를 제시하였다.

• 한국의학물리학회지:의학물리
• /
• 제32권4호
• /
• pp.179-184
• /
• 2021

This study aimed to determine the optimal thickness of the active layer and scan mode for a flexible radiochromic film (F-RCF) based on the active lithium salt of pentacosa-10,12-diynoic acid (LiPCDA). F-RCFs of 90, 120, 140, and 170-㎛ thickness were fabricated using LiPCDA. Several pieces of the F-RCFs were exposed to doses ranging from 0 to 3 Gy. Transmission and reflection modes were used to scan the irradiated F-RCFs. Their dose-response curves were obtained using a second-order polynomial equation. Their sensitivity was evaluated for both scanning modes, and the uniformity of the batch was also examined. For both the transmission and reflection modes, the sensitivity increased as the film thickness increased. For the reflection mode, the dose response increased dramatically under 1 Gy. The value of the net optical density varied rapidly as the thickness of the film increased. However, the dose-response curves showed a supralinear-curve relationship at doses greater than 2 Gy. The sensitivity of the reflection scan at doses greater than 2 Gy was higher than that of the reflection scan within 0-2 Gy. The sensitivity steadily decreased with increasing doses, and the sensitivity of the two modes was within 0.1 to 0.2 at 2 Gy and was saturated beyond that. For the transmission scan, the sensitivity was approximately 0.2 at 3 Gy. For the intra-batch test result, the maximum net optical density difference of the intra-batch was 5.5% at 2 Gy and 7.4% at 0.2 Gy in the transmission and reflection scans, respectively. In the low-dose range, film thickness of more than 120-㎛ was proper in the transmission mode. In contrast, the transmission mode showed a better result compared to the reflection mode. Therefore, the proper scan mode should be selected according to the dose range.