• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.385-391
• /
• 2016

We demonstrated experimentally a variable optical frequency comb source using a cascaded dual parallel Mach Zehnder modulator (DPMZM) and a phase modulator (PM). With this simple configuration and applying low drive voltages, we generated variable comb source composed of spectral lines 3, 5, 7, 9 and 11 with 10-GHz frequency spacing, also generated 2 and 3 spectral lines with 20 GHz frequency spacing. The generated comb source maintains high spectral coherence across the entire bandwidth with good spectral flatness (within 1-dB for 2, 3, 5, 7 comb lines, within 2-dB for 9-comb lines and within 3-dB for 11 comb lines). The flat and variable comb source is mainly achieved by manipulating 6 operating parameters of DPMZM, setting RF amplifier gain, connected at phase modulator and phase shifters. Hence the method is simple and offers great flexibility in achieving flat and variable comb spectrum, which is experimentally demonstrated. This brings advantages of power efficiency due to low driving voltages, simplicity and cost effectiveness to the system.

• 센서학회지
• /
• 제26권1호
• /
• pp.44-49
• /
• 2017

In this paper, the automatic sweep flattening for wavelength swept laser of SS-OCT has implemented. Through its performance test applied to the laser, 50 nm flat sweeping range, ${\pm}0.5dB$ fluctuation range, 22 sec the time required, and 10 mW average optical power were obtained. This shows that the realized automatic process can replace the inconvenient manual operation used for polarization control of current sweeping laser. Additionally it cuts costs for optical spectrum analyzer necessary to sweep monitoring.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.76-84
• /
• 1994

Recently, Optical BJTC as a new approach for real-time multi-target tracking has been intensively studied. But the conventional system has some problems in the practical applications such as the false alarm and target missing and low correlation efficiency, and these poor performances are analyzed to be deeply dependent on the binarization method. So, in this paper, a new BJTC system which has the improved performances in target discrimination and diffraction efficiency is suggested, which is based on the JTPS having the same properties with those of the matched filter and new power spectrum binarization method to use effectively the high frequency components of the JTPS signal. Through the computer simulation and some experiments, the performances of the new BJTC tracking system are analyzed and proved to be superior to those of the conventional system baseds on Median method in multi- target tracking problems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.119-121
• /
• 2005

The problem of lamp life have being solved before electrode-less lamps were developed. But, mercury is using till now. So people are concerned about friendly-environmental lamp, and many researcher hardly study it. In this paper, an ICP lamp which is using Xe gas and Ne gas was designed after optical properties were measured and analyzed. As a result, H-mode properties and penning effect properties were known. Also xenon and neon of properties analyze by spectrum.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.101-109
• /
• 2014

In this paper, four apodization functions are proposed for silicon-on-insulator (SOI) strip waveguides with sidewall-corrugated gratings. The effects of apodization functions on the full width at half maximum (FWHM), the side-lobe level, and the reflectivity of the reflection spectrum are studied using the coupled-mode theory (CMT) and the transfer-matrix method (TMM). The results show that applying proposed apodization functions creates very good filtering characteristics. Among investigated apodized waveguides, the apodization functions of Polynomial and z-power have the best performance in reducing side-lobes, where the side-lobe oscillations are entirely removed. Four functions are also used for precise adjustment of the bandwidth. Simulation results show that the minimum and maximum values of the FWHM are 0.74 nm and 8.48 nm respectively. In some investigated functions, changing the apodization parameters decreases the reflectivity which is compensated by increasing the grating length.

• 한국광학회지
• /
• 제14권3호
• /
• pp.292-297
• /
• 2003

최대 1.9 W의 레이저 다이오드 출력을 Nd:YV $O_4$결정 단면에 집속시키고 공진기 내부에 KTP 결정을 두어서 제2고조파 변환시켜 녹색광(532 nm) 레이저를 발생시켰다. 다이오드 레이저 스퍽트럼과 레이저 결정의 흡수 스펙트럼을 비교하여 최적의 다이오드 작동 온도를 찾았다. 공진기 길이와 출력경의 곡률을 변화시키면서 출력의 변화를 관측한 결과, 최대 80 ㎽의 녹색광 레이저 출력을 얻었으며 최대 출력을 내는 공진기 조건에서는 집속된 여기광의 직경과 TE $M_{00}$ 모드의 직경이 일치함을 알았다. 발생된 녹색광 레이저는 다중모드로 발진하였으며 출력 요동이 심하였다. 단일모드 발진을 시키기 위하여 브루스터 판과 에탈론 등을 사용하는 여러 가지 형태의 공진기를 시도하여 보았다. 실험 결과, 에탈론을 사용한 공진기에서 가장 큰 출력인 60 ㎽ 의 단일 종모드 출력을 얻었다. 단일모드로 발진하는 레이저의 출력 요동은 다중 모드에 비하여 1/10이하로 감소하였다.

• 한국광학회지
• /
• 제24권5호
• /
• pp.245-250
• /
• 2013

위너-킨친 정리(Wiener-Khinchin)는 어떤 신호의 자기상관 함수(Autocorrelation)가 그 신호의 일율 분광띠(Power Spectrum)에 해당됨을 보이는 것으로써, 분광학 및 통신 공학에서 신호 처리와 관련된 매우 중요한 정리이다. 학부 실험실에서 이 정리를 시현하려면 상관기(Correlator)와 신호 처리 장비와 같은 비교적 고가의 장비가 요구되므로, 정리의 시현이 용이하지 않다. 근래에 들어 디지털 공학의 발전과 함께 보급되고 있는 디지탈 오실로스코프들은 측정 결과의 수치화와 그들에 관한 연산 기능이 포함되어 있어, 이 정리를 간단히 시현시킬 수 있다. 본고에서는 정리의 유도 과정에서 얻어지는 실험 이론과 함께 디지털 오실로스코프를 이용해서 이 정리를 시현시키는 방법을 소개한다. 1930년대에 소개된 정리를 다시 재조명하려는 이유는, 비록 정리가 오래전에 소개되었다고는 할지라도 구체적인 유도 과정이나 물리 분야와 관련된 내용들은 우리에게는 여전히 잘 알려져 있지 않기 때문이다. 유도 과정에서 교류 복소 총저항(Impedence) Z, 역율(Power Factor), 위너 분광곡선의 확장된 물리적 의미와 함께, 나아가, 흑체 복사에서 플랑크(M. Planck)의 양자화에 대한 배경이 자연스럽게 나타나므로, 일반물리학, 현대물리학, 분광학 및 물성실험 등과 관련된 강의에 참고가 될 수 있다고 생각된다.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.199-205
• /
• 2014

This research focuses on the development of an interrogator that operates and measures fiber Bragg grating(FBG) multiplexing sensor probes for accurate-measurement of the blade deflection in a wind power generator. We designed and fabricated an optical source and spectrum module for the interrogator. Additionally, we verified the wavelength repeatability within 0.001 nm and the wavelength stability within 1 pm of the optical source, and we experimentally determined that the wavelength scanning range was about 44.4 nm. The FBG sensor with 2 nm resolution can be extended to a performance-efficient system that measures more than 20 sensors. The implemented interrogator has 0.141 nm wavelength variations corresponding to an ambient temperature range of $0^{\circ}C$ to $70^{\circ}C$. The measurement error can be easily reduced by employing a temperature compensation algorithm. In this study, we quantitatively confirmed the accuracy and operating stability of the interrogator.

• 한국재료학회지
• /
• 제19권8호
• /
• pp.443-446
• /
• 2009

This study develops a highly transparent ohmic contact scheme using indium oxide doped ZnO (IZO) as a current spreading layer for p-GaN in order to increase the optical output power of nitride-based lightemitting diodes (LEDs). IZO based contact layers of IZO, Ni/IZO, and NiO/IZO were prepared by e-beam evaporation, followed by a post-deposition annealing. The transmittances of the IZO based contact layers were in excess of 80% throughout the visible region of the spectrum. Specific contact resistances of $3.4\times10^{-4}$, $1.2\times10^{-4}$, $9.2\times0^{-5}$, and $3.6\times10^{-5}{\Omega}{\cdot}cm^2$ for IZO, Ni/Au, Ni/IZO, and NiO/IZO, respectively were obtained. The forward voltage and the optical output power of GaN LED with a NiO/IZO ohmic contact was 0.15 V lower and was increased by 38.9%, respectively, at a forward current of 20 mA compared to that of a standard GaN LED with an Ni/Au ohmic contact due to its high transparency, low contact resistance, and uniform current spreading.

• Current Optics and Photonics
• /
• 제5권6호
• /
• pp.721-729
• /
• 2021

We demonstrate a Pr³⁺:YLF 639.7-nm laser with single-frequency output based on the Q-switched pre-lase technology, pumped by a fiber-coupled GaN blue laser diode. The pre-lase technology is realized by the step-type loss of the acousto-optical Q-switched device. The conclusions of the theoretical research are verified experimentally. The mode-suppression ratio was 44 dB at the single-frequency laser output. Detection by interferometer verified the realization of the stable single-frequency laser. In addition, the emission spectrum had a linewidth of 139.9 MHz, measured by Fabry-Perot interferometer. The single-frequency laser's single-peak power was over 19.7 W with 98.8-ns pulse duration, obtained under an absorption power of 1.74 W.