• 한국통신학회논문지
• /
• 제40권10호
• /
• pp.1940-1946
• /
• 2015

차세대 광가입자망시스템에서는 전송속도 및 전송거리 향상을 위해 코히어런트 광전송 시스템이 검토되고 있다. 그런데 이 전송방식의 경우 I/Q 불균형 요인에 의해 전송 성능 저하를 일으킬 수 있으며, 가입자 수신부 내부 구조의 비대칭성은 I/Q 진폭불균형의 주 요인이 될 수 있다. 따라서 안정적인 전송 성능 보장을 위해서는 이런 불균형 성분을 제거하거나 보상해주어야 한다. 본 논문에서는 I/Q 진폭불균형의 원인 및 전송 성능에 미치는 영향을 분석하고, 수신부에서 발생하는 I/Q 진폭불균형 요인을 보상하는 방식을 제시하였다. 또한 시뮬레이션을 통해 제안한 방식의 성능을 보인다.

• 한국통신학회논문지
• /
• 제28권5A호
• /
• pp.316-322
• /
• 2003

본 논문에서는 광증폭 전송시스템에서 중요한 성능제한 요소인 modulation instability (MI)에 의한 비선형 왜곡을 보상하기 위해서 그 특성을 이론적으로 분석하고, 이를 토대로 MI를 보상하는 광 링크 구조를 제안한다. MI 보상 광링크 구조는 optical phase conjugators (OPCs)와 dispersion compensating fibers (DCFs)를 이용하여 MI 의한 분산을 보상하도록 설계하였다. 제안된 보상구조는 시뮬레이션 실험에서 500 km 광전송의 경우에 기존의 구조에 비해 그 성능이 크게 향상됨을 확인할 수 있었다.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.351-356
• /
• 2010

We investigated the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) in multi-channel subcarrier multiplexed (SCM) optical transmission systems. We theoretically analyzed the transmission characteristics of the SCM signals with the effect of SPM and chromatic dispersion in a single-mode optical fiber by numerical simulations based on the nonlinear Schrodinger equation. The numerical simulation results revealed that the effect of fiber dispersion and SPM could occur independently between subcarrier channels in two-channel SCM systems for small optical modulation index (OMI) and large channel spacing. However, for large OMI, small channel spacing, and large fiber launching power, we found a performance degradation of the two-channel system compared to that of a single-channel system. These parameters are therefore important for the optimization of multi-channel SCM systems applicable to radio over fiber networks.

• 한국통신학회논문지
• /
• 제21권10호
• /
• pp.2687-2702
• /
• 1996

It is desirable that the implementation of next generation information infrastructure is the Integrated Network combining the satellite and the terrestrial network. The application of the ATM network being the dominant infrastrure of terrestrial network to the satellite network is being studied variously. Considering these concepts, this paper analyzes due to ATM transport via satellite, evaluates the degradation of QoS and proposes reliable method of ATM cell transport via satellite. Because ATM is investigated with the optical fiber which is almost error free characteristics, the practical application of ATM transport via satellite essentially need the channel coding(FEC:Forward Error Correction) to enhance BER performance. But using the FEC coding, satellite link has burst error characteristics which evoke severe performance degradation fo ATM QoS. Therefore in satellite link, we analyze burst error characteristics using experimental results of computer simulation. Then to compensate these characteristics, based on this analysis and HEC dual mode algorithm we propose various interleaver structures(Block interleaver, Intra interlever, and Inter-Intra interleaver) to improve cell transmission QoS. We execute performance evaluations of iterleaver structures by computer simulation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.533-539
• /
• 2013

Number of components and payload systems installed in satellites were found to be exposed to various disturbance sources such as the reaction wheel assembly, the control moment gyro, coolers, and others. A micro-level of vibration can introduce jitter problems into an optical payload system and cause significant degradation of the image quality. Moreover, the prediction of on-orbit vibration effects on the performance of optical payloads during the development process is always important. However, analyzing interactions between subsystems and predicting the vibration level of the payloads is extremely difficult. Therefore, this paper describes the analytical and experimental approach to microvibration effects on satellite optical payload performance with integrated jitter analysis framework, micro vibration emulator and satellite structure testbed.

• 한국태양에너지학회 논문집
• /
• 제32권4호
• /
• pp.43-50
• /
• 2012

Metal-metal oxide (M-M oxide) cermet solar selective coatings with a double cermet layer film structure were deposited on the Al-deposited glass substrate by using a directed current (DC) magnetron sputtering technology. M oxide (CrO and ZrO) was used as the ceramic component in the cermets, and Cr and Zr used as the metallic components. In addition, black Cr (Cr-$Cr_2O_3$ cermet) solar selective coatings were deposited on the Ni-plated Cu substrate by using a electroplating method for comparison. The thermal stability tests were carried out for performance evaluation of solar coatings. Reflectance measurements were used to evaluate both solar absorptance(${\alpha}$) and thermal emittance (${\epsilon}$) of the solar coatings before and after thermal testing by using a spectrometer. Optical properties of optimized cermet solar coatings were ${\alpha}{\simeq}0.94-0.96$ and ${\epsilon}{\simeq}0.1$ ($100^{\circ}C$). The results of thermal stability test of M-M oxide solar coatings showed that the Cr-CrO cermet solar selective coatings were more stable than the Zr-ZrO cermet selective coatings at temperature of both $400^{\circ}C$ in air and $450^{\circ}C$ in vacuum. The black Cr solar selective coatings were degraded in air at temperature of $400^{\circ}C$. The main optical degradation modes of these coatings were diffusion of metal atoms, and oxidation.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.191-198
• /
• 2013

Geo-pointing is a function that maintains LOS(Line of Sight) to a stationary ground target by controlling azimuth and elevation angles of a EOS(Electro-Optical System) which are calculated from aircraft navigation data and target coordinates. In design and implementation of the geo-pointing, a transmission time delay between GPS/INS and EOS is a major degradation factor of the geo-pointing performance when the aircraft is rapidly maneuvered especially. In this paper, a kalman filter is designed to compensate the transmission time delay of aircraft navigation data. Simulation and test results show that the geo-pointing performance is enhanced by the proposed compensation technique.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(1)
• /
• pp.244-247
• /
• 2000

This paper deals with methods for partial response maximum-likelihood (PRML) detection and crosstalk cancellation. In accrodance with the demand for increased recording density, 20 gigabyte (Gbyte) digital versatile disk (DVD) ROM channel is considered. Channel is modelled to be close to real optical channel using DIFFRACT$\^$TM/. After comparing the spectral characteristics of various PR polynomials, P(D)=1＋D＋D$^2$＋D$^3$is proposed as a target PR. The performance of the system is illustrated under the condition that the readout signal is degraded by crosstalk, radial tilt and nonlinear distortions in optics. The experimental results show that crosstalk and nonlinear distortions degrade performance by about 2dB, respectively. We also show that when radial tilt is added to the crosstalk, the performance degradation assumes quite significant proprotions.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.1077-1088
• /
• 1996

In this paper, we propose a new method to analyze the performance degradation by timing jitters in the receivers of intensity modulation/direct detection digital optical communication systems where pulse-shaping filters are used to minimize intersymbol interference. The results obtained from the proposed analytical method show that conventional analytical methods underestimate the influence of timing jitters on the receiver performance. Using the proposed anlaytical method, we derive an analytic equation for approximated power penalty due to timing itters and obtain an exact power penalty by numerical analyses. Assuming Gaussian or uniform probability density function for timing jitters, we also show that assumption of Gaussian distribution for timing jitters yields more performance degration than that of uniform distribution.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.182-185
• /
• 2003

Error performance of two modulation schemes of millimeter-wave over fiber (MMoF) system i.e., optical double side band (ODSB) and optical single side band (OSSB) modulations is analyzed under Rician fading. Bit error rates (BER) of two detection techniques i.e., coherent and noncoherent detection are also compared in Rician fading. In aspect of error performance, ODSB modulation scheme has better BER than OSSB modulation scheme has under Rician fading. On the other hand, OSSB modulation scheme is advantageous in case of considering high bandwidth efficiency and small power degradation. Coherent detection technique is proper in Rician fading, because coherent detection provides more SNR gain whether fading is serious or not. Noncoherent detection can be applied when we need a simple receiver structure.