• 한국광학회지
• /
• 제13권4호
• /
• pp.308-313
• /
• 2002

매개하향변환과정에서 동시에 발생한 서로 다른 진동수의 광자쌍을 이용한 4차 간섭실험에서 비고전적인 맥놀이 효과를 측정하였다. 각진동수가 각각 $\omega1$과 $\omega2$인 광자쌍을 빔분할기에서 중첩시키고, 빔분할기의 두 출구에 놓인 두 검출기로 동시계수 할 때, 두 광자가 빔분할기에 도달하는 시간 간격에 따라 cos($\omega1$-$\omega2$)의 함수로 동시계수의 변화를 나타내었다. 두 광자의 파장 차이가 41㎚일 때 측정된 맥놀이 진동수 ($\omega1$-$\omega2$)/2$\pi$는 0.29${\times}10^{14}$㎐이었고, 진동수 차이에 해당하는 두 광자의 시간간격은 34.82fs로 측정되었다.

• 대한치과보철학회지
• /
• 제31권4호
• /
• pp.482-505
• /
• 1993

The purpose of this study was to evaluate the fracture characteristics and the effect of resin bonding of laminate porcelain. In order to characterize the indentation-induced crack, Young's moduli and characteristic indentation dimensions were measured. The fatigue life under three point flexure test was measured using the electro-dynamic type fatigue machine, and the crack propagation with thermocycling was investigated on the condition of 15 second dwell time each in $5^{\circ}C\;and\;55^{\circ}C$ bath. The Vickers indentation pattern and the fracture surface were examined by an optical microscope and a scanning electron microscope (SEM). The results obtained were summarized as follows ; 1. Young's moduli(E) of the laminate porcelain and the resin cement used in this experiment were $62.56{\pm}3.79GPa$ and $15.01{\pm}0.12GPa$, respectively. 2. The initial crack size of the laminate porcelain was $69.19{\pm}5.94{\mu}m$ when an indentation load of 9.8N was applied, and the fracture toughness was $1.065{\pm}0.156MPa\;m^{1/2}$. 3. The fatigue life of laminate porcelain showed the constant fracture range at the stress level 27.46-35.30MPa. 4. When a cyclic flexure load was applied, the fatigue life of resin-bonded laminate porcelain was more decreased than that of laminate porcelain. 5. When a thermocycling was conducted, the crack growth rate of resin-bonded laminate porcelain was more increased than that of laminate porcelain. 6. Fracture surface showed the radial crack, the lateral crack, and the macroscopic crack branching region beneath the plastic deformation region when an indentation load of 9.8N was applied.

• Tuberculosis and Respiratory Diseases
• /
• 제68권1호
• /
• pp.16-21
• /
• 2010

Background: Lung cancer is usually diagnosed at an advanced stage, resulting in a poor prognosis. The detection of these lesions at an earlier stage would be a clear benefit to patients. However, it is extremely difficult to detect carcinomatous lesions in the bronchial mucosal sites during a routine bronchoscopy. Methods: This study employed a novel optical technique, known as narrowband imaging (NBI), which allows noninvasive visualization of the microvascular structure of an organ's surface using reflected light. Results: Narrow band imaging was performed on 10 patients who were radiologically suspicious or had a high risk of lung cancer. The median age of the patients was 57.5 years (range, 44~81 years), and 80% of the patients were male. All lesions showed a microvascular proliferation pattern (dotted, tortuous and abruptly ending vessel) on the magnified NBI. Two lesions were confirmed histologically to be adenocarcinoma and the remaining lesions were squamous cell carcinomas. Two lesions were confirmed histologically to be a carcinoma in situ. Conclusion: NBI is a promising and potentially powerful tool for identifying carcinomas at an earlier stage or a central lesion during a routine bronchoscopy examination.

• Composites Research
• /
• 제16권4호
• /
• pp.74-79
• /
• 2003

Micromechanical 시험법과 음향방출을 이용하여 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면물성과 미세파괴메카니즘을 고찰하여 상호 비교하였다. 산소 플라즈마 처리된 PBO와 Kevlar 섬유강화 에폭시 복합재료의 계면전단강도와 접착일은 극성 작용기의 도입으로 향상 시킬 수 있었다. 임계표면장력과 총 표면자유에너지 중 극성 표면자유에너지는 플라즈마 처리된 Kevlar 섬유에서 가장 컸으며. 미처리된 PBO의 섬유의 경우에서 가장 작았다. Microfibril 파단 형상은 산소 플라즈마 처리된 Keviar 섬유의 경우에서는 명확하게 관찰 되었으며. 미처리와 비교차여 microfibril 파단이 대각선 방향으로 연속적해서 일어나 가장 많은 섬유 파단 신호가 감지되었다 비파괴 음향방출법을 이용하여 얻은 섬유파단 감지 결과는 microdroplet과 두 섬유강화 복합재료 시험법에서 광학현미경을 이용하여 관찰한 미세파단 형상과 상호 일치하였다.

• 대한원격탐사학회지
• /
• 제33권6_1호
• /
• pp.993-1001
• /
• 2017

가뭄은 전 지구차원의 다방면에 걸쳐 피해를 주는 자연 재해이다. 21세기 들어 최근까지 다양한 위성관측 기기를 활용하여 다양한 가뭄의 유형을 모니터링 할 수 있게 되었는데, SMAP위성의 토양수분, GRACE 위성의 생태계 물 저장량, Terra & Aqua의 생태계 생산량과 증발산량 그리고 위성 강우 관측 등이 그 예이다. 이들 위성 자료의 분석을 통해 지역적 수자원 현황 및 가뭄과 이로 인한 (수)생태계 영향, 농업 등의 산업, 그리고 인간사회의 영향을 시공간적으로 파악할 수 있다. 가시광선부터 마이크로파까지 채널 (밴드)마다 관측할 수 있는 기상 및 환경 변수가 다르기 때문에 다양한 센서로부터 획득할 수 있는 원격탐사자료는 한반도 전역을 대상으로 가뭄에 대한 수자원 변화와 연관된 피해를 시공간적으로 파악하는 데에 상호 보완적이며 효과적인 수단이다. 따라서 이러한 위성자료들을 통해 국가 재난 대응 차원의 활용방안을 제안하고자 한다.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.273-276
• /
• 2011

Ultraviolet (UV) light emitting diodes (LEDs) were grown on a patterned n-type GaN substrate (PNS) with 200 nm silicon-di-oxide (SiO2) nano pattern diameter to improve the light output efficiency of the diodes. Wet etched self assembled indium tin oxide (ITO) nano clusters serve as a dry etching mask for converting the SiO2 layer grown on the n-GaN template into SiO2 nano patterns by inductively coupled plasma etching. PNS is obtained by n-GaN regrowth on the SiO2 nano patterns and UV-LEDs were fabricated using PNS as a template. Two UV-LEDs, a reference LED without PNS and a 200 nm PNS UV-LEDs were fabricated. Scanning Electron microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), Photoluminescence (PL) and Light output intensity- Input current- Voltage (L-I-V) characteristics were used to evaluate the ITO-$SiO_2$ nanopattern surface morphology, threading dislocation propagation, PNS crystalline property, PNS optical property and UVLED device performance respectively. The light out put intensity was enhanced by 1.6times@100mA for the LED grown on PNS compared to the reference LED with out PNS.

• 소성∙가공
• /
• 제20권1호
• /
• pp.11-16
• /
• 2011

Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.

• 대한치과의사협회지
• /
• 제49권4호
• /
• pp.203-210
• /
• 2011

The aims of this study were to evaluate the adequate thickness of opaque resins for situations such as an oral black cavity and discolored tooth structure, as well as the translucency of each opaque material at various thicknesses. Six opaque-shade composite resins (Z-350 OA3, Amelogen Universal A2O, Esthet-X A2O, Esthet-X A4O, Charmfil UO and Aelite Universal OA3) were prepared in metal molds with a hole of 8 mm in diameter and various thicknesses (0.5mm, 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0 mm and 4.0mm). Four backgrounds (white tile, black tile, C4 shade porcelain and opaque resin itself) were used to determine the translucency parameter (between black and white backgrounds). and to mimic a black oral cavity (between black and opaque resin backgrounds) and a discolored tooth structure (between C4 and opaque resin backgrounds). Color measurements were made by a colorimeter to determine the CIELAB values of each specimen with each background and to calculate the translucency parameter and ${\Delta}E^*$ value difference among the specimens on the backgrounds. The translucency parameter and ${\Delta}E^*$ obtained between black and opaque resin backgrounds decreased in similar pattern as thickness increased. A C4 background was masked by resin thicknesses of 0.5-1.0mm, while a black background required thicknesses of 1.0-2.0mm. Adequate knowledge about differences in the optical character like translucency of the materials used is essential, together with the accumulated experience of the individual clinician.

• 전기학회논문지
• /
• 제63권7호
• /
• pp.929-933
• /
• 2014

The measurement of joint angle is important to evaluate the patient's disability. The modified fiber tip and light propagation of the developed fiber sensor were investigated to increase the range of angle detection. Different shapes of fiber tips were manufactured with a polishing machine to deliver light signal in various patterns. Output signals were analyzed to obtain joint angle change with inverse polynomial models. The measured joint angles were displayed with LabVIEW program and the reliability was tested by comparing with a commercial angle sensor. This method can be used in rehabilitation field to determine patient's progress.

• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.77-82
• /
• 2005

비터비 알고리즘을 이용한 부분 응답 최대 유사도 (PRML) 검출 방법은 원래의 정보 시퀀스와 가장 유사한 시퀀스를 결정하기 위해 유사도 메트릭 계산 방법이 사용된다. 일반적으로, 트렐리스도에서 각 노드의 가지는 동일한 확률을 갖는다고 가정한다. 그러나, 최소 및 최대 런-길이 구속을 갖는 변조 코드가 사용될 경우, 코드의 특정 패턴에 대한 발생 비율(Ro)은 서로 다르게 되어, 결과적으로 이러한 가정은 틀리게 된다. 본 논문에서는 PRML 검출에 있어 코드의 특정 패턴에 대한 발생 비율을 이용한 유사도 메트릭 계산 방법을 제안한다. 모의 실험에서는 두 종류의 (1, 7) 런-길이 제한 코드에 대해 PR 목표 응답의 차수를 변화시켜 가면서 발생 비율을 계산하였다. 그 결과, 제안한 PRML 검출 방법은 고밀도 자기기록 및 광 기록 채널에서 기존의 PRML 방법과 비교하여 10/sup -5/ BER에서 약 0.5dB 이상의 SNR 성능 이득을 가져옴을 확인하였다.