• Journal of the Korean Ceramic Society
• /
• v.14 no.4
• /
• pp.230-235
• /
• 1977

In this paper the conditions of surface crystallization of glass were studied. The basic glass which is apt to crystallize, with $SiO_2$ 72.50, $Al_2O_3$ 5, 00, $Na_2O$ 8.00 $K_2O$ 3.50, CaO 5.00, MgO 3.00, $B_2O_3$ 3.00 Wt% is chosen. The strain point and softening point of this glass is 4$25^{\circ}C$ and 778$^{\circ}C$ each, and between the two temperatures we could get grystal on its surface by immersion in salt baths during some controlled hours. The kind of crystal on the surface of glass was confirmed by X-ray diffraction analysis and the change of the thickness of crystalline layers depending on temperature and time, was surveyed by using optical microscope. The results are as follows; 1. The chloride group is more suitable than sulfate group for the treating salt. 2. In the condition with 50 LiCl.50NaCl at 62$0^{\circ}C$ for 2 hrs and with 50 LiCL.20-30 NaCl.30-20 $CaCl_2$ at 72$0^{\circ}C$ for 15-20 min. we could get the best crystalline layers. 3. The crystal was silica-O and petalite with a little tridymite and nepheline. 4. The thickness of crystalline layers increased with increasement of temperature and time.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.776-781
• /
• 2010

CdSe films were deposited on glass substrates (CdSe/glass) by thermal evaporation. Substrate temperature was lowered by cooling substrate holder with liquid nitrogen. Substrate temperatures were $200^{\circ}C$, $0^{\circ}C$ and $-40^{\circ}C$. The crystallographic properties and surface morphologies of the CdSe/glass films were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The optical and electrical properties of the films were investigated by dependence of energy gap, photosensitivity and resistivity on the substrate temperature. CdSe/glass showed energy gap of ~1.72 eV regardless of substrate temperature. The resistivity of the films decreased to $0.5{\Omega}cm$ by lowering the substrate temperature to $-40^{\circ}C$. The CdSe/glass films prepared at $0^{\circ}C$ showed the highest photosensitivity among the films in this study.

• Journal of Integrative Natural Science
• /
• v.6 no.4
• /
• pp.215-219
• /
• 2013

In this study, in order to investigate how consecutive treatments of glass surface with HF acid and water vapor/Ar plasma affect the quality of 3-aminopropyltriethoxysilane self-assembled monolayer (APS-SAM), poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were vapor phase-polymerized immediately after spin coating of FeCl3 and poly-urethane diol-mixed oxidant solution on the monolayer surfaces prepared at various treatment conditions. For the film characterization, various poweful tools were used, e.g., FE-SEM, an optical microscope, four point probe, and a contact angle analyzer. The characterization revealed that a well prepared APS-SAM on a glass surface treated with water vapor/Ar plasma is very useful for uniform coating of FeCl3 and DUDO mixed oxidant solution, regardless of HF treatment. On the other hand, a bare glass surface without APS-SAM but treated with HF and water vapor/Ar plasma generally led to a very poor oxidant film. As a result, PEDOT films vapor phase-polymerized on APS-SAM surfaces are far superior to those on bare glass surfaces in the quality and electrical characteristics aspects.

• Nuclear Engineering and Technology
• /
• v.53 no.6
• /
• pp.2025-2037
• /
• 2021

The influence of lead cations on natural quartz (QZ) from Egypt as a glass shielding material for the composition with nominal formula (10Na₂O - (90 - x) QZ - xPbO (where x = 30, 35, 40, 45 and 50 mol %)) was examined. The studied samples are synthesized via the melt quenching method at 1050 ℃. The X-ray diffraction XRD patterns were confirmed the glass nature for studied samples. Moreover, the optical properties, and the transparency for all compositions were examined by UV-Vis spectroscopy. Also, the major elemental composition of the natural quartz were estimated via the X-ray fluorescence (XRF) technique. Further, the density and molar volume were determined. Furthermore, the nuclear shielding parameters such as, mass attenuation coefficient, effective atomic number, electronic density, the total atomic, and electronic cross sections as well as the mean free path, and the half value layer with different gamma ray energies (81 keV-1407 keV) were calculated. Besides, the results showed that the shielding behavior towards the gamma ray radiation for all glass samples was increased as the increment in PbO concentration in the glass system.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.44-50
• /
• 2013

E-glass fiber is the most widely used glass fiber for reinforced composite materials of aircrafts, automobiles and leisure equipments. But recently researches are being progressed to reduce boric oxide from 8 % to 0 (zero), as is called 'Boron free E-glass', because of increasing material cost, environmental problem, and improving chemical resistance and mechanical properties of E-glass fiber. In this study, we fabricated the bulk glass and fiber glass of 'Boron free E-glass (BF) compositions', and characterized thermal properties and optical properties. 'Boron free E-glass (BF)' was obtained by the melting of mixed batch materials at $1550^{\circ}C$ for 2 hrs with different $Al_2O_3$ compositions 5~10 %. We obtained transparent clear glass with high visible light transmittance value of 81~86 %, and low thermal expansion coefficient of $4.2{\sim}4.9{\times}10^{-6}/^{\circ}C$ and softening point of $907{\sim}928^{\circ}C$. For the chemical resistance test of 'BF' fiber samples, we identified that the higher alumina contents gives the better corrosion resistance of glass fiber.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.34-36
• /
• 1990

The flow direction in a glass tube is measured by using a forward scatering dual beam laser Doppler velocimeter with an acousto-optic modulator. We can determine the flow direction by measuring the shifted Doppler frequency which is dependent on the order of modulation of the laser frequency shifting moves only the Doppler signal, enabling complete separation of the Pedestal and Doppler singal.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.07a
• /
• pp.61-66
• /
• 1991

1Tw 레이저 개발기술은 모든 TW급 레이저 개발을 위한 첫 단계의 핵심기술 이다. 본 연구에서는 지난 3년간 개발하여온 설계 및 제작된 부품들에 대한 제원이 소개되고, 또 2단계 rod증폭계까지의 실험 결과를 측정, 분석하였으며 개발된 TW레이저의 응용분야에 대해 고찰하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 1991.06a
• /
• pp.109-109
• /
• 1991

자기변형 효과가 큰 Metallic glass 2605SC에 20cm의 광섬유를 붙여서 교류 자기장 측정을 위한 Mach-Zehnder형 광섬유 간섭계를 구성하였다. 능동 위상 추적 방법을 사용하여 간섭계의 위상차를 최대 측정감도를 갖는 $\pi$/2로 고정시킴으로써 온도 및 진동등의 영향에 의한 신호소멸 현상을 해결하였다. 0.2~2.0 KHz에서 주파수특성, dc bias의 영향 그리고 교류 자기장과 간섭계 출력 사이의 선형성을 조사하였다.

• 정보저장시스템학회:학술대회논문집
• /
• 2005.10a
• /
• pp.113-118
• /
• 2005

Small form factor optical disks for near-field optics using solid immersion lens were developed. Disk durability properties in terms of head-disk interface (HDI) properties were investigated by drag test, diamond like carbon film and lubricant film were coated on the small form factor disk to enhance HDI. Disks with glass substrates and lubricant films after heat treatment showed more durable characteristics. Coverlayers made of UV resin were uniformly coated by spin coating In which the ski-jump could not be formed by adopting outer ring technique.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.270-271
• /
• 2003

lens를 통과하는 두 광선(paraxial ray, marginal ray)이 lens의 축이나 focal plane과 만나는 지점이 서로 일치하지 않을 때, 두 개의 서로 다른 교차점 사이의 거리나 높이를 종, 횡 구면수차 (Lateral, Longitudinal Spherical aberration)이라 한다. 수차의 크기는 lens의 굽어짐 (bending)형태에 따라 달라지는데 3차 근사 lens 공식으로 유도한 식은 다음과 같으며, 그 결과의 그래프는 그림.1 과 같다. (중략)